This paper explores the development and application of the incremental forming process, an innovative method for manufacturing complex parts with high flexibility and low tooling costs. The review categorizes three key process variants: Single Point Incremental Forming (SPIF), Two Point Incremental Forming (TPIF), and Incremental Forming with Conjugated Active Plate (IFCAP). This study demonstrates the significant effects of these process variants on part accuracy and material behavior, particularly under varying process conditions. This study identifies critical technological parameters such as tool diameter, feed rate, and vertical step size. The findings also demonstrate the role of optimized toolpaths and lubrication in improving process efficiency. Applications of incremental forming across various industries, including automotive, aerospace, medical, and construction, demonstrate its versatility in prototype production and small-series manufacturing. These results contribute to a deeper understanding of incremental forming, offering practical recommendations to enhance precision, scalability, and material formability, and supporting future innovations and broader industrial applications.
The present paper aims to study the behavior of tailor welded blanks subjected to a single point incremental forming (SPIF) process from an experimental point of view. This process was chosen to deform truncated cone shapes of AA1050 aluminum alloy with different thicknesses. A uniaxial tensile test was performed to determine the mechanical characteristics of the alloy. Initial experimental tests implicated the use of variable wall angle parts which were processed on unwelded sheet blanks for determination of the behavior of the material and the forming forces. Afterwards, the wolfram inert gas (WIG) welding technique was used for joining two sheet blanks with different thicknesses either through one pass on one side, or by one pass on both sides. The conclusion of this paper indicates that one-sided welded blanks cannot be deformed successfully without fracture. In case of two-sided welded blanks, the results showed that the desired depth of 25 mm can be reached successfully. In case of the SPIF process, if welded blanks must be deformed, then the suitable method is to weld the blanks on both sides.
The present paper aims to study the behaviour of Metal Active Gas (MAG) tailor welded blanks during the single point incremental forming process (SPIF) from an experimental point of view. The single point incremental forming process was chosen for manufacturing truncated cone and truncated pyramid shaped parts. The same material (S355) and the same thickness (0.9 mm) were selected for the joining of blank sheets because the main goal of the paper was to study the influence of the MAG welding process throughout the SPIF process. A Kuka robot, equipped with a force transducer and an optical measurement system were used for manufacturing and evaluating the parts by SPIF. The selected output data were major and minor strain, thickness reduction, forces and springback at the SPIF process. Another line test was performed to evaluate the formability in SPIF. The main conclusion of the paper is that during the SPIF process, fractures occur in one side welded blanks even at moderate wall angles, while in the case of double side welded blanks there is a decrease of formability but parts can still be produced at moderate angles (55 degrees) without any problems.
Single point incremental forming is one of the most intensely researched die-less manufacturing process. This process implies the usage of a CNC equipment or a serial robot which deforms a sheet metal with the help of a relatively simple tool that follows an imposed toolpath. As every cold metal forming process, besides the many given advantages it has also some drawbacks. One big drawback in comparison with other cold metal forming processes is the low accuracy of the deformed parts. The aim of this research is to investigate the sheet metal bending mechanism through finite element method analysis. The results shows that the shape of the retaining rings has a big influence over the final geometrical accuracy of the parts manufactured through single point incremental forming.
1 January 2021 in IOP Conference Series: Materials Science and Engineering
Single point incremental forming is a new emerging technology, used mainly for prototype development or small series production, with good prospects in industrial implementation. However, the parts manufactured through this process often presents low accuracy, thus the industrial implementation is yet limited. Incremental forming process can be done with the help of different technological equipment, such as industrial robots and numerically controlled machines. Since the process is still in development phase, it is a good practice to use finite element analysis software packages in order to reduce time and costs to produce accurate parts. The aim of this paper is to investigate the behavior of different aluminum alloys deformed through SPIF regarding forming forces, thickness distribution and springback effect. Based on numerical simulations performed, the material which produces the most accurate parts for the frustum cone can be chosen for further experimental research.
1 December 2022 in Acta Universitatis Cibiniensis. Technical Series
Nowadays, there is a high demand for rapid prototyping parts and for products manufactured through plastic cold deformation. Incremental forming process is one of many which presents numerous advantages for fast production of complex shape parts. The purpose of this study is to develop a numerical model through finite element analysis to simulate the incremental forming process. For this analysis a variable wall angle part (VWA) which ranges from a 45° wall angle at the higher base of frustrum cone to a 70° wall angle at the base of the shape was proposed. The numerical model showed where the maximum strains are localized, how big the forces are during the process and how much the material thinned. Although the model does not indicate a possible failure of the material, the integrity of the structural stiffness was altered due to a minimum thickness reached of just 0.26mm.