This paper presents a review of the development of optical fibers made of multiple materials, particularly including silica glass, soft glass, polymers, hydrogels, biomaterials, Polydimethylsiloxane (PDMS), and Polyperfluoro-Butenylvinyleth (CYTOP). The properties of the materials are discussed according to their various applications. Typical fabrication techniques for specialty optical fibers based on these materials are introduced, which are mainly focused on extrusion, drilling, and stacking methods depending on the materials’ thermal properties. Microstructures render multiple functions of optical fibers and bring more flexibility in fiber design and device fabrication. In particular, micro-structured optical fibers made from different types of materials are reviewed. The sensing capability of optical fibers enables smart monitoring. Widely used techniques to develop fiber sensors, i.e., fiber Bragg grating and interferometry, are discussed in terms of sensing principles and fabrication methods. Lastly, sensing applications in oil/gas, optofluidics, and particularly healthcare monitoring using specialty optical fibers are demonstrated. In comparison with conventional silica-glass single-mode fiber, state-of-the-art specialty optical fibers provide promising prospects in sensing applications due to flexible choices in materials and microstructures.
This paper reports a soft fiber optic sensor based on polymer fiber Bragg gratings (PFBGs) for simultaneous measurement of shear and normal stresses. The sensor comprises two PFBGs embedded in soft polydimethylsiloxanes (PDMS) matrix, and one of them is horizontally placed while the other is tilted. The transduction principle is that applied normal and/or shear stresses lead to deformation of the matrix and induce strains on gratings. Finite element simulation reveals non-uniform strain distribution along two fibers for direct imbedding that is verified by theoretical analysis, and therefore four gaskets are used to stretch polymer optical fibers from two ends and to produce strains on gratings. The fabricated sensor is tested by concurrently applying normal and shear forces, and Bragg wavelength shifts of two gratings were found to be linearly dependent on stresses in two directions. The measured pressure sensitivity is 0.8 pm/Pa in the range of 2.4 kPa and the shear stress sensitivity is 1.3 pm/Pa for a full range of 0.6 kPa. Such soft sensors are especially suitable for high precision measurement of contact stresses involving human skins and tissues because they are similar in Young's modulus to the used PDMS.
26 August 2010 in IEEE Photonics Technology Letters
Fiber Bragg grating (FBG) with a 962-nm Bragg wavelength was fabricated in trans-4-stilbenemethanol doped poly(methyl methacrylate) polymer optical fibers (POFs) using a phase mask with 17% zeroth-order diffraction for the inscription wavelength of 325 nm. The effect of zeroth-order diffraction of the phase masks on FGB in POF was first examined by observing micrographs of the gratings. A linear relationship between the fiber axial strain and shift of the FBG was observed up to 6.5% tensile strain with a strain sensitivity of 0.916 pm/ . However, this shift was notably affected by the time-dependent stress relaxation in the fiber, especially when the FBG was subject to a relatively higher strain > 2%.
A fluorine-containing acylhydrazone was newly designed and found to form gels in a mixed solvent of DMSO–ethylene glycol. The gelator could show brilliant blue light upon mixing with Al3+, which could be erased by F− ions and thus forming an erasable gel.
Influences of relative humidity and temperature on PMMA based fiber Bragg gratings (FBGs) are systematically studied. First, we have found that relative humidity exhibits much significant influence on the Bragg wavelength. An increase of 1% in relative humidity leads to a shift of 66 pm of Bragg wavelength centered at 1301 nm at 20°C, while 1°C increase in temperature only results in -7.8 pm shift for the same grating at constant 60%RH. Secondly, a strong synergetic effect has been identified between temperature and relative humidity-temperature sensitivity of PMMA based FBGs is humidity-dependent and humidity sensitivity is temperature-dependent. Finally, taking into consideration of this synergy, the temperature sensitivity of three Bragg gratings in a single fiber with central wavelength of 957, 1304 and 1545 nm peak are determined as -4.3, -7.6 and -8.3 pm/°C, respectively, at constant 60%RH. These sensitivity values are one order of magnitude lower than those measured without controlling ambient humidity.