3D bioprinting has progressed tremendously in the field of tissue engineering in its ability to deliver cells with high precision, prototypes with rapidly customized features, and engineer constructs with highly controllable microenvironments.

Background:Sacroiliac (SI) screw fixation is a demanding technique, with a high rate of screw malposition due to the complex pelvic anatomy. TiRobot™ is an orthopedic surgery robot which can be used for SI screw fixation. This study aimed to evaluate the accuracy of robot-assisted placement of SI sc

The inhaled nanoparticles have attracted more and more attention, since they are more easily to enter the deep part of respiratory system. Some nanoparticles were reported to cause pulmonary inflammation. The toxicity of nanoparticles depends not only on its chemical component but also on the quantity and position of the deposition. The deposition of nanoparticles is not uniform and is influenced by airflow transport. The high deposition mainly occurs at the carinal ridges and the inside walls around the carinal ridges. Many factors could affect the transport and deposition of nanoparticles, such as particle size, flow rate, structure of airway, pulmonary function, and age. In this review, we discussed the methods and technique involved in particle transport and deposition studies. The features of particles deposition could be observed in clinic experiments and animal experiments. The mechanism of transport could be studied by numerical simulation. Numerical model and experiment study supplement each other. Some techniques such as medical imaging may support the study of nanoparticles transport and deposition. The knowledge of particles transport and deposition may be helpful both to defend the toxicity of inhaled particles and to direct inhaled drug delivery.

3D printing (3DP) is becoming a research and development focus in nanobiomaterials as it can quickly and accurately fabricate any desired 3D tissuemodel only if itssize is appropriate. The different material powders (with different dimensional scales) and the printing strategies are the most direct factors influencing 3DP quality. With the development of nanotechnologies, 3DP is adopted more frequently for its rapidness in fabrication and precision in geometry. The fabrication in micro/nanoscale may change the performance of biomaterials and devices because it can retain more anisotropy of biomaterials compared with the traditionally rapid prototyping techniques. Thus, the biosafety issue is especially concerned by many researchers and is investigated in performance and safety of biomaterials and devices. This paper investigates the performance of 3DP in fabrication of nanobiomaterials and devices so as to partially explain how 3DP influences the performance and safety of nanobiomaterials.

The synthesis, characterization and catalytic capability of the NiW–nano-hydroxyapatite (NiW–nHA) composite were investigated in this paper. The NiW–nHA catalyst was prepared by a co-precipitation method. Then Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDX) were used to analyze this material. In addition, the catalytic capacity of the NiW–nHA composite was also examined by FT-IR and gas chromatography (GC). The results of FT-IR analysis indicated that Ni, W and nHA combined closely. TEM observation revealed that this catalyst was needle shaped and the crystal retained a nanometer size. XRD data also suggested that a new phase of CaWO₄ appeared and the lattice parameters of nHA changed in this system. nHA was the carrier of metals. The rates of Ni/W-loading were 73.24% and 65.99% according to the EDX data, respectively. Furthermore, the conversion of 91.88% Jatropha oil was achieved at 360 °C and 3 MPa h⁻¹ over NiW–nHA catalyst. The straight chain alkanes ranging from C₁₅ to C₁₈ were the main components in the production. The yield of C₁₅–C₁₈ alkanes was up to 83.56 wt%. The reaction pathway involved hydrocracking of the CC bonds of these triglycerides from Jatropha oil. This paper developed a novel non-sulfided catalyst to obtain a “green biofuel” from vegetable oil.