Mohsen Mirzaeian

Dr. Mohsen Mirzaeian

FPT Industrial S.p.A. Turin

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2017 in SAE International Journal of Engines
Verified
Journal Article
Closed access
PDF file
NFNavin Fogla
Navin Fogla
MBMichael Bybee
Michael Bybee
MMMohsen Mirzaeian
Mohsen Mirzaeian
FMFederico Millo
Federico Millo
SWSyed Wahiduzzaman
Syed Wahiduzzaman
The turbulent flow field inside the cylinder plays a major role in spark ignition (SI) engines. Multiple phenomena that occur during the high pressure part of the engine cycle, such as early flame kernel development, flame propagation and gas-to-wall heat transfer, are influenced by in-cylinder turbulence. Turbulence inside the cylinder is primarily generated via high shear flows that occur during the intake process, via high velocity injection sprays and by the destruction of macro-scale motions produced by tumbling and/or swirling structures close to top dead center (TDC) . Understanding such complex flow phenomena typically requires detailed 3D-CFD simulations. Such calculations are computationally very expensive and are typically carried out for a limited number of operating conditions. On the other hand, quasi-dimensional simulations, which provide a limited description of the in-cylinder processes, are computationally inexpensive. They require only a small fraction of the computational resources needed for CFD calculations and can be carried out for a large number of cases. Such simulations typically use zero dimensional (0D) phenomenological sub-models to simulate the various in-cylinder phenomena such as heat transfer, combustion, flow variations etc.The current study presents a newly developed sub-model, available as a part of the software GT-SUITE, which governs the evolution of the mean and turbulent flow inside the cylinder. Within a 0D context, the accurate knowledge of in-cylinder turbulence levels close to ignition is essential to reliably model turbulent flame propagation. However, engines running with stratified charge and/or early spark timings also require the accurate estimation of turbulence levels over the intake and compression strokes. The new model aims to accurately predict in-cylinder turbulence levels over the entire engine cycle. It utilizes a K-k-∊ approach, where K and k are the mean and turbulent kinetic energy and ∊ is the turbulent dissipation rate. The study shows that the model, once calibrated for a particular engine using 3D-CFD results, has the capability to predict the temporal evolution of in-cylinder flow quantities and also responds well to changes in the operating conditions of the engine such as variations in speed, valve lift and timing.

14 April 2015 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
SLSabino Luisi
Sabino Luisi
VDVittorio Doria
Vittorio Doria
ASAndrea Stroppiana
Andrea Stroppiana
FMFederico Millo
Federico Millo
MMMohsen Mirzaeian
Mohsen Mirzaeian
The application of Miller cycle through Late Intake Valve Closure (LIVC) or Early Intake Valve Closure (EIVC) for knock mitigation at high load on a turbocharged downsized spark ignition engine was experimentally investigated.By reducing the effective compression ratio due to a shorter compression stroke and hence achieving lower charge temperatures inside the cylinder, significant mitigation of knock tendency could be obtained. As a consequence, the spark advance retard could be substantially decreased and the enrichment of the mixture could significantly be reduced, thus obtaining impressive efficiency improvements.In this research, both EIVC and LIVC strategies have been examined aiming to achieve possible improvements for knock mitigation and after some preliminary investigations confirmed LIVC being more effective than EIVC for this goal, the latter was discarded and the research activities were focused on LIVC only.Significant reductions in fuel consumption for high load engine operating points were achieved, especially at moderately high engine speeds, above 2500 RPM, where the turbocharger group was capable to compensate for the reduction of volumetric efficiency caused by the LIVC by means of an increased boost pressure.However, at lower engine speeds, despite these operating conditions being generally the most critical for knock occurrence, only minor positive effects were observed, since the lack of an adequate boost pressure did not allow further delays of the IVC, thus preventing the full exploitation of the Miller cycle.The highest gains were registered at 3000 RPM, at 18 bar and 20 bar BMEP, where the engine indicated fuel conversion efficiency was improved by about 11 and 20 percent, respectively. It is worth mentioning that, thanks to the Miller cycle exploitation, the engine could be operated under stoichiometric conditions in this region of its operating map, while normally adopted IVC timings typically require significant mixture enrichments.

27 September 2017 in International Journal of Engine Research
Verified
Journal Article
Closed access
LZLe Zhao
Le Zhao
AMAhmed Abdul Moiz
Ahmed Abdul Moiz
SSSibendu Som
Sibendu Som
NFNavin Fogla
Navin Fogla
MBMichael Bybee
Michael Bybee
JKJanardhan Kodavasal
Janardhan Kodavasal
In this work, we have studied cycle-to-cycle variation in a spark-ignited engine using large-eddy simulation in conjunction with the G-equation combustion model. A single cylinder of a four-cylinder port-fueled spark-ignited engine was simulated. A total of 49 consecutive full cycles were computed. The operating condition studied in this work is stoichiometric and stable and represents a load of 16 bar brake mean effective pressure and an engine speed of 2500 r/min. The computational fluid dynamics simulation shows good agreement in terms of in-cylinder pressure prediction with respect to the experiments and is also able to capture the range of cycle-to-cycle variation observed in experiments. Furthermore, neither the simulation nor the experiments show any distinguishable pattern in the sequence of high and low cycles. We numerically decoupled the effects of variations in equivalence ratio fields and velocity fields to isolate the effects of differences in the velocity field and differences in the equivalence ratio field on flame development and propagation. Based on this study, we inferred that for this engine, under the operating conditions studied, the differences in burn rates can be attributed to the differences in the velocity flow-field in the region around the spark gap during ignition. We then performed an analysis to identify the correlation between peak cylinder pressure and flame topologies over all the simulated cycles. We found that high cycles (higher peak cylinder pressure values) are strongly correlated to flatter flame volume shapes (flattened in the piston-to-head direction) and volumes that are more symmetric about the ignition axis. In addition, these kinds of flame volumes were found to correlate well with lower values of prior-to-ignition velocity going from the intake to the exhaust side (mean flow caused by tumble) at the spark and also higher values of prior-to-ignition velocity in the piston-to-head direction.

5 April 2016 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
MMMohsen Mirzaeian
Mohsen Mirzaeian
FMFederico Millo
Federico Millo
LRLuciano Rolando
Luciano Rolando
A 0D phenomenological turbulence model, based on the K-k and k- ɛ approaches, was coupled with a predictive turbulent combustion model using the commercial code GT-Suite, and its predictive capabilities were assessed for a downsized turbocharged SI engine.Differently from the 3D-CFD approach which is typically utilized to describe the evolution of the in-cylinder flow field, and which has very high computational requirements, the 0D phenomenological approach adopted in this work gives the opportunity to predict the evolution of the in-cylinder charge motion and the subsequent combustion process by means of a turbulent combustion model, with a significantly reduced computational effort, thus paving the way for the simulation of the whole engine operating map.Moreover, a procedure has been adopted to calibrate the turbulent combustion model parameters by means of a Design of Experiments (DoE) coupled with Genetic Algorithm (GA) approach, in order to predict the burn rate at various engine operating points.Finally, a detailed validation process, based on an extensive experimental data set, was carried out concerning the predicted burn rates and the in-cylinder pressure traces for several engine operating points, including load, speed and spark timing sweeps, achieving a satisfactory agreement and thus confirming the reliability of the proposed approach.

29 March 2018 in Journal of Energy Resources Technology
Verified
Journal Article
Open access
PDF file
MAMuhsin Ameen
Muhsin Ameen
MMMohsen Mirzaeian
Mohsen Mirzaeian
Federico MilloFederico Millo
Federico Millo
SSSibendu Som
Sibendu Som
Cycle-to-cycle variability (CCV) is detrimental to IC engine operation and can lead to partial burn, misfire, and knock. Predicting CCV numerically is extremely challenging due to two key reasons. First, high-fidelity methods such as large eddy simulation (LES) are required to accurately resolve the in-cylinder turbulent flow field both spatially and temporally. Second, CCV is experienced over long timescales and hence the simulations need to be performed for hundreds of consecutive cycles. Ameen et al. (2017, “Parallel Methodology to Capture Cyclic Variability in Motored Engines,” Int. J. Engine Res., 18(4), pp. 366–377.) developed a parallel perturbation model (PPM) approach to dissociate this long time-scale problem into several shorter time-scale problems. This strategy was demonstrated for motored engine and it was shown that the mean and variance of the in-cylinder flow field was captured reasonably well by this approach. In the present study, this PPM approach is extended to simulate the CCV in a fired port-fuel injected (PFI) spark ignition (SI) engine. The predictions from this approach are also shown to be similar to the consecutive LES cycles. It is shown that the parallel approach is able to predict the coefficient of variation (COV) of the in-cylinder pressure and burn rate-related parameters with sufficient accuracy, and is also able to predict the qualitative trends in CCV with changing operating conditions. It is shown that this new approach is able to give accurate predictions of the CCV in fired engines in less than one-tenth of the time required for the conventional approach of simulating consecutive engine cycles.

1 September 2016 in Fuel
Verified
Journal Article
Closed access
Federico MilloFederico Millo
Federico Millo
MMMohsen Mirzaeian
Mohsen Mirzaeian
SLS. Luisi
S. Luisi
VDV. Doria
V. Doria
ASA. Stroppiana
A. Stroppiana