The geometry of multi-stable metamaterials, will change by the transition from one stable state to another. Shape morphing wings consisted of multi-stable metamaterials have capability to deform as desired, attributed to the programmable mechanical properties of architectured materials. In this study, to fabricate large-scale shape morphing structures, multi-stable unit cells with reversible connections were designed, printed and assembled. The mechanical properties and deformation capability were examined for multi-stable metamaterials with different geometrical parameters (e.g. width, thickness of beams). The deformation sequence for one assembled column consisting of identical multi-stable unit cells was found unpredictable, but could be tailored into a predictable manner by slightly adjusting beam geometry. To realize the customized deformation profile, the overall design domain of shape morphing structures was discretized into independent sub-regions. By enforcing deformation on sub-regions via the precise control of mechanical actuators that fixed with corresponding columns, the assembled shape morphing structures formed the targeted deformation. Also, the deformation feasibility was also demonstrated after incorporating voids or nondeformable functional elements within the assembled metamaterials platform. This study had provided practical solution for the design and fabrication of metamaterial-based shape morphing structures, and would shed light on future innovation of morphing aircraft.
The morphing wing trailing edge is an attractive aviation structure due to its shape-adaptive ability, which can effectively improve the aerodynamic performance of an aircraft throughout the whole flight. In this paper, a mechanical solution for a variable camber trailing edge (VCTE) based on a multi-block rotating rib is proposed. Parametric optimizations are conducted to achieve the smooth and continuous deformation of the morphing rib. A prototype is designed according to the optimized results. In addition, the deformations of the trailing edge are monitored via an indirect method using a fiber Bragg grating (FBG) sensor beam. Finally, ground tests are performed to investigate the morphing capacity of the VCTE and the shape monitoring ability of the proposed method. Our results indicate that a maximum deflection range from 5° upward to 15° downward can be obtained for the VCTE and the indirect sensing system can satisfactorily monitor the deformation of the trailing edge.
A seamless and smooth morphing leading edge has remarkable potential for noise abatement and drag reduction of civil aircraft. Variable-stiffness compliant skin based on tailored composite laminate is a concept with great potential for morphing leading edge, but the currently proposed methods have difficulty in taking the manufacturing constraints or layup sequence into account during the optimization process. This paper proposes an innovative two-step design method for a variable-stiffness compliant skin of a morphing leading edge, which includes layup optimization and layup adjustment. The combination of these two steps can not only improve the deformation accuracy of the final profile of the compliant skin but also easily and effectively determine the layup sequence of the composite layup. With the design framework, an optimization model is created for a variable-stiffness compliant skin, and an adjustment method for its layups is presented. Finally, the deformed profiles between the directly optimized layups and the adjusted ones are compared to verify its morphing ability and accuracy. The final results demonstrate that the obtained deforming ability and accuracy are suitable for a large-scale aircraft wing.