An uneven-span modified greenhouse dryer was constructed and tested in no-load conditions under natural convection mode under the weather conditions of Marrakech, Morocco, for two distinct days. Moreover, a CFD evaluation of the uneven-span greenhouse dryer was performed as tool to visualize the air temperature distribution inside the dryer. For validating the CFD model, the temperature variations along the hours of the day were compared to the experimental results. A good agreement is obtained between the computed and measured inside air temperature with a difference not exceeding 8.46°C, with a correlation coefficient () and root mean square percentage deviations () 0.94 and 8.17, respectively. Furthermore, the maximum inside air temperature was measured to be 56°C and 52°C while the minimum inside relative humidity was measured to be 17% and 12%, for day-1 and day-2, respectively. The benefice of using asphalt as a floor covering material was revealed as an efficient way to heat the inside air at low solar radiations. The performances of the dryer were evaluated by the percentage of net heat gain variation as a way to validate the effectiveness of the dryer. This latter is found to be equal to 46% and 48% for the two days, respectively.
14 March 2023 in Journal of Thermal Analysis and Calorimetry
A few seconds flash photopyrolysis is used as efficient screening tool for the investigation of selected biomass in producing syngas, hydrogen and biochar.
In this study an even-span greenhouse dryer was designed and simulated under two different drying modes, natural and forced convection modes. The CFD simulation was carried out taking into consideration the weather conditions at the mean day of January (winter season) in Marrakech, Morocco. CFD was employed to predict the air velocity, temperature and relative humidity distribution inside the greenhouse dryer. Under forced convection mode the air temperature and relative humidity were uniformly distributed inside the dryer. The highest air temperature and lowest air relative humidity was recorded at the mean hour of the simulation day, under forced convection mode. They were 37 °C and 12%, respectively. These results reveal that under forced convection mode the greenhouse exhibited significant thermal performances.