With the rapid development of science and technology, it is urgent to develop the extreme condition-resistance and multifunctionality of sensors to broaden their application scenarios. Here, an extreme condition-resistant superelastic silica nanofiber (SNF)/MXene composite aerogel is fabricated by an ice-templating assembly strategy. The hierarchical three-dimensional cellular structure composed of conductive two-dimensional MXene nanosheets as a framework and flexible one-dimensional SNFs as a scaffold endows the composite aerogel with excellent mechanical and piezoresistive properties at an ultralow density of 9 mg cm−3. The assembled aerogel sensor shows a high sensitivity (−0.33 kPa−1), ultralow detection limit (0.01 kPa), rapid response/recover time (72/99 ms), large workable strain range (1–80%), and good stability (>5000 cycles), capable of detecting various human motions in real time, whether faint pulse beating or strenuous running. More importantly, the composite aerogel still maintains excellent mechanical and piezoresistive stability (>1000 cycles) after high-temperature baking (600 °C) or at ultralow temperature (−130 °C), even in liquid nitrogen (−196 °C). Furthermore, the outstanding thermal insulation performance (24.7 mW m−1 K−1) and exceptional low-voltage driven Joule heating performance (126.5 °C at 5 V) of the composite aerogel are presented simultaneously in a dual-mode thermal management device integrating heat generation and insulation. Based on these characteristics, a multifunctional aerogel sensor that can be used for synchronous sensing and thermal management is demonstrated for the first time. This work offers a novel insight into the development of multifunctional aerogel sensors and greatly broadens the application scenarios of wearable devices.
Volatile organic compounds (VOCs) from polypropylene (PP) seriously restricts the application of PP in an automotive field. Herein, the traceability of VOCs from PP resins during manufacturing process and accelerated photoaging degradation was clarified on basis of an accurate characterization method of key VOCs. The influence of PP structures on changing the accelerated photoaging degradation on the VOCs was systematic. The VOCs were identified by means of Gas chromatography (GC) coupled with both a hydrogen flame ion detector (FID) and a mass spectrometry detector (MSD). Results showed that both the molecular structure of PP and the manufacturing process affected the species and contents of VOCs. In addition, the photoaging degradation of PP resulted in a large number of new emerged volatile carbonyl compounds. Our work proposed a possible VOC formation mechanism during the manufacturing and photoaging process. VOCs from PP resins were originated from oligomers and chain random scission during thermomechanical degradation. However, β scission of alkoxy radical and Norrish tape I reactions of ketones via intermediate transition were probably the main VOCs formation routes towards PP during photoaging degradation. This work could provide scientific knowledge on both the accurate traceability of VOCs emissions and new technology for development of low-VOCs PP composites for vehicle.