Owing to their extraordinary thermal, mechanical, optical, and electrical properties, boron nitride nanotubes (BNNTs) have been attracting considerable attention in various scientific fields, making it more promising as a nanomaterial compared to other nanotubes. Recent studies reported that BNNTs exhibit better properties than carbon nanotubes, which have been extensively investigated for most environment-energy applications. Irrespective of its chirality, BNNT is a constant wide-bandgap insulator, exhibiting thermal oxidation resistance, piezoelectric properties, high hydrogen adsorption, ultraviolet luminescence, cytocompatibility, and stability. These unique properties of BNNT render it an exceptional material for separation applications, e.g., membranes. Recent studies reported that water filtration, gas separation, sensing, and battery separator membranes can considerably benefit from these properties. That is, flux, rejection, anti-fouling, sensing, structural, thermal, electrical, and optical properties of membranes can be enhanced by the contribution of BNNTs. Thus far, a majority of studies have focused on molecular simulation. Hence, the requirement of an extensive review has emerged. In this perspective article, advanced properties of BNNTs are analyzed, followed by a discussion on the advantages of these properties for membrane science with an overview of the current literature. We hope to provide insights into BNNT materials and accelerate research for environment-energy applications.

In membrane processes, a spacer is known to play a key role in the mitigation of membrane fouling. In this study, the effect of electric polarization on a graphene-blended polymer spacer (e.g., poly(lactic acid), PLA) for organic fouling on membrane surfaces was investigated. A pristine PLA spacer (P-S), a graphene-blended spacer (G-S), and an electrically polarized graphene-blended spacer (EG-S) were successfully fabricated by 3D printing. Organic fouling tests were conducted by the 5-h filtration of CaCl₂ and a sodium alginate solution through commercially available membranes, which were placed together with the fabricated spacers. Membranes utilizing P-S, G-S, and EG-S were characterized in terms of the fouling amount on the membrane surface and fouling roughness. Electrostatic forces of EG-S provided 70% less and 90% smoother fouling on the membrane surface, leading to an only 14% less water flux reduction after 5 h of fouling. The importance of nanomaterial blending and polarization was successfully demonstrated herein.

In this study, we fabricated a nanocomposite polyethersulfone (PES) HF membrane by blending acid functionalized carbon nanotubes (FCNT) to address the issue of reduced membrane life, increased energy consumption, and operating costs due to low permeability and membrane fouling in the ultrafiltration process. Additionally, we investigated the effect of FCNT blending on the membrane in terms of the physicochemical properties of the membrane and the filtration and antifouling performance. The FCNT/PES nanocomposite HF membrane exhibited increased water permeance from 110.1 to 194.3 LMH/bar without sacrificing rejection performance and increased the flux recovery ratio from 89.0 to 95.4%, compared to a pristine PES HF membrane. This study successfully developed a high filtration and antifouling polymer-based HF membrane by blending FCNT. Furthermore, it was validated that blending FCNT into the membrane enhances the filtration and antifouling performance in the ultrafiltration process.

Membrane surface fouling has always been a critical issue for the long-term operation of polymeric membranes. Therefore, it is crucial to develop new approaches to prevent fouling. While developing new approaches, characterization methods are greatly important for understanding the distribution of fouling on the membrane surface. In this work, a cellulose acetate membrane was fouled by the filtration of artificial wastewater based on alginate. The surfaces of fouled membranes were characterized through scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), atomic force microscopy (AFM), and white light interferometry (WLI). The results were then compared in terms of the resolution, accuracy, feasibility, and cost-efficiency.