Aleksandr Burdonov

Dr. Aleksandr Burdonov


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2018 in Tsvetnye Metally
Verified
Journal Article
Closed access
ABAleksandr Burdonov
Aleksandr Burdonov
EZE. V. Zelinskaya
E. V. Zelinskaya
LGL. V. Gavrilenko
L. V. Gavrilenko
AGA. A. Gavrilenko
A. A. Gavrilenko
BSBratsk Jsc “Rusal-Bratsk Aluminium Smelter”
Bratsk Jsc “Rusal-Bratsk Aluminium Smelter”
The paper presents studies on the research of material composition of aluminacontaining estimates, formed in the process of aluminium production on electrolysers with self-baking anodes during technological operations at PJSC “RUSAL Bratsk”. During the research, the content of valuable components and impurities in a sample of various classes was determined. It was found that aluminium is concentrated in fractions –0.315+0.16 mm (45.7%) and –0.16+0 mm (48.8%), silicon in the fraction –0.63+0.315 mm (1.91%), iron in –1.25+0.63 mm (0.601%) and –0.63+0.315 mm (0.62%). The material consists of cryolite (Na3AlF6), chiolite (Al3F14Na5), quartz, feldspar, carbonaceous matter and technogenic phase of the composition (NaF)·1.5CaF2·AlF3. The products revealed two phases: dark, black-gray and light, grayish-white. It was proved that these phases have significant differences in chemical composition of the feedstock. In the quantitative ratio, in all products, the light gray phase predominates (the fraction ratio in the samples is 90:10–95:5). The analysis of the work is carried out the operating technological scheme of processing the estimate. It is established that it is necessary to improve it with inclusion of possibly magnetic or electric separation operations, as well as dry gravitational or special methods for removing impurities.

25 May 2020 in Journal of Mining Institute
Verified
Journal Article
Open access
PDF file
PFPavel Fedotov
Pavel Fedotov
ASArkadiy Senchenko
Arkadiy Senchenko
KFKonstantin Fedotov
Konstantin Fedotov
ABAleksandr Burdonov
Aleksandr Burdonov
The paper presents the analysis of studies of the enrichment of sulfide and oxidized ores in Yakutia deposits. The ore of the deposit is a mixture of primary, mixed and oxidized ores. The main useful component of the studied ore samples is gold with a content of 1.5 to 2.8 g/t, the silver content is low – 5-17 g/t. Ore minerals are represented by sulfides, among which pyrite predominates. The total sulfide content does not exceed 3-5 %. The presence in the ore of free and associated gold with a grain size from fractions of a micron to 1.5 mm. Gold is represented by nuggets in intergrowth with sulfides and also forms independent inclusions. Ores are classified as easily cyanidable. It was found that the content of amalgamable gold is 10-49, the share of cyanidable gold ranges from 66.67-91, the share of refractory gold is 9.0-33.33 %, which in absolute amount equals to 0.24-0.8 g/t. The extraction of gold in gravitation concentrate varies depending on the gold content in the ore and the yield of concentrate and for ores with a gold content of 1.5-2.8 g/t from 40 to 60 %. The direct cyanidation of all studied ore samples established the possibility of extracting gold into solution up to 86.7-92.9 %, the gold content in cyanidation cakes is 0.2-0.3 g/t. Investigations of the gravitation concentrate by the method of intensive cyanidation showed that with an initial gold content of ~ 500 g/t, up to 98.9 % is extracted into the solution. The gold content in intensive cyanide cakes will be 6-15 g/t. A set of studies carried out by the authors of the article at various institutes showed that it is advisable to process ore from the deposit using cyanidation technology with preliminary gravitational extraction of gold.

11 May 2021 in Metallurgist
Verified
Journal Article
Closed access
PDF file
PFP. K. Fedotov
P. K. Fedotov
ASA. E. Senchenko
A. E. Senchenko
KFK. V. Fedotov
K. V. Fedotov
ABAleksandr Burdonov
Aleksandr Burdonov

28 February 2019 in Obogashchenie Rud
Verified
Journal Article
Closed access
VPV. V. Pelikh
V. V. Pelikh
VSV. M. Salov
V. M. Salov
ABAleksandr Burdonov
Aleksandr Burdonov
NLN. D. Lukyanov
N. D. Lukyanov

1 February 2019 in International Journal of Engineering Research in Africa
Verified
Journal Article
Closed access
PDF file
EZElena Zelinskaya
Elena Zelinskaya
NTN.A. Tolmacheva
N.A. Tolmacheva
VBV.V. Barakhtenko
V.V. Barakhtenko
ABAleksandr Burdonov
Aleksandr Burdonov
NGN.E. Garashchenko
N.E. Garashchenko
AGA.A. Garashchenko
A.A. Garashchenko
The article is devoted to the research into the utilization of large volume industrial wastes to produce mineral-polymer composite construction materials. To produce the composites, polyvinyl chloride wastes have been suggested as binding thermoplastic matrix and ash-and-slag wastes, which are the by-product of coal combustion at TPP of Irkutsk Oblast, as mineral filler. Since the problem of accumulation and storage, such as large volumes of power generation industry wastes is becoming more and more serious, the recycling of these wastes with the production of useful products is the vital task. Plants that manufacture products from PVC also produce plastic wastes in the form of rejected and substandard raw material, which can be recycled. At the same time, the problem of production available construction materials for the Baikal region from the local cheap raw material is solved. The team of Irkutsk National Research Technical University has conducted a number of the industrial trials on the production of mineral-polymer composites by the method of extrusion. As a result, the principal opportunity of co-utilization of PVC wastes and ash-and-slag materials during the production of composite construction materials has been testified. Local construction companies can use the produced materials.

1 July 2015 in International Polymer Science and Technology
Verified
Journal Article
Open access
ABAleksandr Burdonov
Aleksandr Burdonov
VBV.V. Barakhtenko
V.V. Barakhtenko
EZE.V. Zelinskaya
E.V. Zelinskaya
VYV.E. Yudin
V.E. Yudin
VEV. Yu. Elokhovskii
V. Yu. Elokhovskii
Investigations have been conducted in which the temperature dependences of the viscoelastic properties of highly filled polymer–mineral composites based on polyvinyl chloride were measured and the loss modulus, dynamic modulus, and mechanical loss tangent were determined using dynamically changing loads.