Previous results showed that an indigenously isolated yeast strain of Candida tropicalis was found to produce 12.11 g/L of xylitol under unoptimized conditions in presence of 50 g/L of xylose. In the present study, optimizing the process using one-variable at-a-time resulted in the production of 59.07 g/L of xylitol in 96 h in presence of 100 g/L xylose. Further optimization using response surface methodology led to the production of 65.45 g/L in medium containing 100 g/L xylose, 0.5% yeast extract, 0.03% MgSO4.7H2O and 0.2% KH2PO4, pH-4.5, 30 °C, 200 r/min for 96 h with 4% inoculum level. Addition of 1% methanol in response surface methodology optimized–medium led to the production of 67.12 g/L. Scaling up in 10 L fermentor resulted in productivity of 0.80 g/Lh with yield of 0.68 g/g. Efficient synthesis of xylitol esters was achieved with butyric acid (50.32%) and caproic acid (38.36%) in 4 h using Pseudomonas aeruginosa lipase in t-butanol: tetrahydrofuran (1:1 v/v).
1 November 2012 in Journal of Industrial Microbiology and Biotechnology
To date, there is no established protocol for the screening of 1,3-propanediol producers. The proposed method has a wide applicability to harness the commercial potential of microorganisms which produce 1,3-propanediol as the end product. Glycerol fermentation broth of 50 bacteria spotted on thin-layer chromatography plates and run by appropriate solvent systems followed by colour development using vanillin reagent gave different coloured spots with most of the compounds present in the fermentation broth. The appearance of a purple-coloured spot of 1,3-propanediol with a retention factor (Rf) of 0.62 forms the basis for the selection of 1,3-propanediol producers. Apart from being a rapid detection system the proposed method is pH independent and its authenticity was reconfirmed by HPLC.