Maxim Mishnev

Dr. Maxim Mishnev

South Ural State University, Chelyabinsk, Chelyabinskaya Oblast’, Russia
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2021 in Polymers
Verified
Journal Article
Open access
PDF file
AKAlexander Korolev
Alexander Korolev
Maxim MishnevMaxim Mishnev
Maxim Mishnev
NVNikolai Ivanovich Vatin
Nikolai Ivanovich Vatin
AIAnastasia Ignatova
Anastasia Ignatova
The rigidity of structures made of polymer composite materials, operated at elevated temperatures, is mainly determined by the residual rigidity of the polymer binder (which is very sensitive to elevated temperatures); therefore, the study of ways to increase the rigidity of polymer materials under heating (including prolonged heating) is relevant. In the previous research, cured thermosetting polymer structure’s non-stability, especially under heating, is determined by its supra-molecular structure domain’s conglomerate character and the high entropy of such structures. The polymer elasticity modeling proved the significance of the entropy factor and layer (EPL) model application. The prolonged heating makes it possible to release adsorptive inter-layer bonds and volatile groups. As a result, the polymer structure is changing, and inner stress relaxation occurs due to this thermo-process, called thermo-relaxation. The present study suggests researching thermo-relaxation’s influence on polymers’ deformability under load and heating. The research results prove the significant polymer structure modification due to thermo-relaxation, with the polymer entropy parameter decreasing, the glassing onset temperature point (Tg) increasing by 1.3–1.7 times, and the modulus of elasticity under heating increasing by 1.5–2 times.

12 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
AKAlexander Korolev
Alexander Korolev
Maxim MishnevMaxim Mishnev
Maxim Mishnev
Dmitrii UlrikhDmitrii Ulrikh
Dmitrii Ulrikh
Thermal expanding is the important property that defines the stress–strain condition of GRP structures exploited under heating and having limited thermal resistance. So, the GRPs’ thermal expanding prediction is the actual requirement of such structures design. The experimental accurate dilatometric study resulted in the non-linearity of thermosetting polymers and plastics thermal expanding under heating. The polymers and plastics thermal expanding coefficient (CTE) is non-linearly increasing under heating before glassing temperature (Tg). Using the previous polymers and GRPs modelling experience and experimental dilatometric results, the non-linear adequate prediction models of their CTE were proposed and proved. The new compensative wave model of polymers’ CTE and multi-layer model of GRPs’ CTE were proposed and successfully tested. A prediction of the temperature dependences of the thermal expansion coefficients of various thermoset polymer binders and data on the reinforcement structure was performed based on the experimentally obtained temperature dependences of the CTEs of GRPs. The prediction was performed using the finite-element homogenization method in the Material Designer module of the academic version of the Ansys package. A satisfactory concurrence of the numerical results of the prognosis and the experiment for all considered cases is observed in the temperature range from 50 to 100 °C, after glass transition temperature best coincidence of numerical values of CTE is obtained for glass-reinforced plastics on epoxy resin, which were not subjected to thermal aging.

29 January 2021 in Polymers
Verified
Journal Article
Open access
PDF file
AKAlexander Korolev
Alexander Korolev
Maxim MishnevMaxim Mishnev
Maxim Mishnev
DZDmitry Zherebtsov
Dmitry Zherebtsov
Nikolai Ivanovich VatinNikolai Ivanovich Vatin
Nikolai Ivanovich Vatin
MKMaria Yurievna Karelina
Maria Yurievna Karelina
The polymer deformability under load and heating is the determining factor in calculating reinforced polymer structures used under heating. Deformability–load/temperature relations make it possible to calculate temperature stresses and deformations in bearing cross-sections of polymer structures such as chimneys, smokestacks, etc. The present study suggests a method of calculating deformability of polymers subjected to the temperature loads. The method is based on the structure model of pack or layer bonded polymer domains where the elasticity of rigid bonds decreases with heating according to entropy principles. The method has been successfully tested on various polymers and compounds with due account for the effect of mineral additives on the deformation modulus increase.

22 April 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Maxim MishnevMaxim Mishnev
Maxim Mishnev
AKAlexander Korolev
Alexander Korolev
EBEkaterina Bartashevich
Ekaterina Bartashevich
Dmitrii UlrikhDmitrii Ulrikh
Dmitrii Ulrikh
The work is devoted to the prediction and experimental research of the elastic bending modulus of glass-reinforced plastics with an epoxy matrix on anhydride hardener reinforced with different glass fabrics. Experimental studies have been carried out to assess the effect of thermal relaxation of the polymer matrix structure due to long-term exposure to elevated temperatures (above the glass transition temperature of the polymer matrix) on the GRP elastic bending modulus at temperatures ranging from 25 to 180 °C. It has been shown that due to the thermal relaxation of the polymer matrix structure, the GRP modulus increases significantly at temperatures above 110 °C and decreases slightly at lower temperatures. Using a multiscale simulation based on a combination of the finite-element homogenization method in the Material Designer module of the ANSYS software package and three-point bending simulation in the ANSYS APDL module, the elastic modulus of FRP was predicted concerning the temperature, its averaged structural properties, and thermal relaxation of the polymer matrix structure. We have also carried out the prediction of the temperature dependences of the modulus of elasticity of glass-reinforced plastics on different types of glass fabrics in the range from 25 to 200 °C by using the entropic approach and the layered model.

20 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Maxim MishnevMaxim Mishnev
Maxim Mishnev
AKAlexander Korolev
Alexander Korolev
Dmitrii UlrikhDmitrii Ulrikh
Dmitrii Ulrikh
AGAnna Gorechneva
Anna Gorechneva
DSDenis Sadretdinov
Denis Sadretdinov
DGDanila Grinkevich
Danila Grinkevich
Solid particle erosion at room and elevated temperatures of filled and unfilled hot-cured epoxy resin using an anhydride hardener were experimentally tested using an accelerated method on a special bench. Micro-sized dispersed industrial wastes were used as fillers: fly ash from a power plant and spent filling material from a copper mining and processing plant. The results showed that the wear of unfilled epoxy resin significantly decreases with increasing temperature, while the dependence on the temperature of the wear intensity at an impingement angle of 45° is linear and inversely proportional, and at an angle of 90°, non-linear. The decrease in wear intensity is probably due to an increase in the fracture limit because of heating. Solid particle erosion of the filled epoxy compounds is considerably higher than that of unfilled compounds at impingement angles of 45° and 90°. Filled compounds showed ambiguous dependences of the intensity of wear on temperature (especially at an impingement angle of 45°), probably as the dependence is defined by the filler share and the structural features of the samples caused by the distribution of filler particles. The intensity of the wear of the compounds at impingement angles of 45° and 90° has a direct and strong correlation with the density and the modulus of elasticity, and a weak correlation with the bending strength of the materials. The data set for determining the correlation between the mechanical properties and the wear included compound filling characteristics and temperature.

1 January 2016 in Procedia Engineering
Verified
Journal Article
Open access
VAV.M. Astashkin
V.M. Astashkin
Maxim MishnevMaxim Mishnev
Maxim Mishnev
The new mobile technology for manufacturing of large-sized shells made of polymeric composite materials (PCM) based on a wet winding with rearing is set forward. The basic principles of the technology are developed, the equipment is manufactured, its approbation is held, and the development prototypes of shells made of fiberglass are produced. The proposed method allows producing the shells of the theoretically unlimited length directly at the construction site. The most promising implementation direction is the vertical-based production of large-sized gas exhaust liners made of PCM for chimneys. The technology is oriented at large-sized structures, the diameter of the gas exhaust duct of which is more than 3 m