Sand–rubber mixtures (SRMs) consisting of stiff sand particles and soft rubber particles are typical binary mixture materials that possess a variety of complicated properties. The complexity of the properties of sand–rubber mixtures is increased when complex stress path is involved. This study investigates the mechanical behavior of sand–rubber mixtures under generalized loading conditions using the discrete element method. A series of numerical true triaxial shear tests were conducted on pure sand and sand–rubber mixtures. The effect of rubber content and loading path on both of the macroscopic and microscopic performances of sand–rubber mixtures was investigated, and the associated microscale mechanism was also discussed. Numerical simulations show that the relationship between the peak friction angle ${\varphi }_p$ and the intermediate principal stress ratio $b$ is influenced by the addition of rubber particles, and a suggested explanation of this phenomenon is that the rubber particles mainly affect the inherent stability of the strong network. Particle-scale observations, including the coordinate number, the proportion of strong contacts, and the fabric anisotropy, are also presented in this study. Microscopic results confirm the explanation above, and explore the force transmission characteristics of sand–rubber mixtures under generalized loading conditions. This research can provide a reference for the constitutive model development of sand–rubber mixtures.

Recycled concrete aggregate (RCA) is a typical construction and demolition (C&D) material generated in civil engineering activities and has been widely used as the coarse-grained filler added to sand for roadbed fillings. The effect of RCA content on the mechanical behavior of sand–RCA mixtures is complicated and still not fully understood. To explore the effect of RCA content on the macroscale and microscopic behavior of the sand–RCA mixtures with various RCA contents, laboratory direct shear tests and numerical simulations using the 3D discrete element method were performed. Experimental direct shear tests on sand–RCA mixtures with different contents of RCA were first carried out. Numerical direct shear models were then established to represent the experimental results. The particle shape effect was also considered using a new realistic shape modeling method to model the RCA particles. Good agreement was observed between the DEM simulation and experimental results, verifying the ability of the numerical direct shear models to represent the direct shear behavior of sand–RCA mixtures. The macroscopic responses of both experimental and numerical tests showed that all samples presented an initial hardening followed by a post-peak strain softening. The peak-state friction angles increased with the RCA content for samples under the same vertical stress. The effect of RCA content on the microscopic behavior based on DEM simulation was also found. The microscopic properties of RCA–sand mixtures, such as coordination numbers, PDFs and contact force transformation features, were analyzed and related to the macroscopic results.