This paper presents an experimental study on human-robot comanipulation in the presence of kinematic redundancy. The objective of the work is to enhance the performance during human-robot physical interaction by combining Cartesian impedance modulation and redundancy resolution. Cartesian impedance control is employed to achieve a compliant behavior of the robot's end effector in response to forces exerted by the human operator. Different impedance modulation strategies, which take into account the human's behavior during the interaction, are selected with the support of a simulation study and then experimentally tested on a 7-degree-of-freedom KUKA LWR4. A comparative study to establish the most effective redundancy resolution strategy has been made by evaluating different solutions compatible with the considered task. The experiments have shown that the redundancy, when used to ensure a decoupled apparent inertia at the end effector, allows enlarging the stability region in the impedance parameters space and improving the performance. On the other hand, the variable impedance with a suitable modulation strategy for parameters' tuning outperforms the constant impedance, in the sense that it enhances the comfort perceived by humans during manual guidance and allows reaching a favorable compromise between accuracy and execution time.
7 October 2008 in IEEE/ASME Transactions on Mechatronics
In this paper, the problem of impedance control of dual-arm cooperative manipulators is studied. A general impedance control scheme is adopted, which encompasses a centralized impedance control strategy, aimed at conferring a compliant behavior at the object level, and a decentralized impedance control, enforced at the end-effector level, aimed at avoiding large internal loading of the object. Remarkably, the mechanical impedance behavior is defined in terms of geometrically consistent stiffness. The overall control scheme is based on a two-loop arrangement, where a simple proportional integral derivative inner motion loop is adopted for each manipulator, while an outer loop, using force and moment measurements at the robots wrists, is aimed at imposing the desired impedance behaviors. The developed control scheme is experimentally tested on a dual-arm setup composed of two 6-DOF industrial manipulators carrying a common object. The experimental investigation concerns the four different controller configurations that can be achieved by activating/deactivating the single impedance controllers.
1 April 1999 in IEEE Transactions on Robotics and Automation
A new approach to 6-DOF impedance control is proposed, where the end-effector orientation displacement is derived from the rotation matrix expressing the mutual orientation between the compliant frame and the desired frame. An alternative Euler angles-based description is proposed which mitigates the effects of representation singularities. Then, a class of angle/axis representations are considered to derive the dynamic equation for the rotational part of a 6-DOF impedance at the end effector, using an energy-based argument. The unit quaternion representation is selected to further analyze the properties of the rotational impedance. The resulting impedance controllers are designed according to an inverse dynamics strategy with contact force and moment measurements, where an inner loop acting on the end-effector position and orientation error is adopted to confer robustness to unmodeled dynamics and external disturbances. Experiments on an industrial robot were carried out, and the results of case studies are discussed.
1 September 1999 in IEEE/ASME Transactions on Mechatronics
A great many control schemes for a robot manipulator interacting with the environment have been developed in the literature. This paper is aimed at presenting a survey of robot interaction control schemes for a manipulator, the end effector of which comes in contact with a compliant surface. A salient feature of the work is the implementation of the schemes on an industrial robot with open control architecture equipped with a wrist force sensor. Two classes of control strategies are considered, namely, those based on static model-based compensation and those based on dynamic model-based compensation. The former provide a good steady-state behavior, while the latter enhance the behavior during the transient. The performance of the various schemes is compared in the light of disturbance rejection, and a thorough analysis is developed by means of a number of case studies.
In the immediate future, metrics related to safety and dependability have to be found in order to successfully introduce robots in everyday environments. The crucial issues needed to tackle the problem of a safe and dependable physical human-robot interaction (pHRI) were addressed in the EURON Perspective Research Project PHRIDOM (Physical Human- Robot Interaction in Anthropic Domains), aimed at charting the new "territory" of pHRI. While there are certainly also "cognitive" issues involved, due to the human perception of the robot (and vice versa), and other objective metrics related to fault detection and isolation, the discussion in this paper will focus on the peculiar aspects of "physical" interaction with robots. In particular, safety and dependability will be the underlying evaluation criteria for mechanical design, actuation, and control architectures. Mechanical and control issues will be discussed with emphasis on techniques that provide safety in an intrinsic way or by means of control components. Attention will be devoted to dependability, mainly related to sensors, control architectures, and fault handling and tolerance. After PHRIDOM, a novel research project has been launched under the Information Society Technologies Sixth Framework Programme of the European Commission. This "Specific Targeted Research or Innovation" project is dedicated to "Physical Human-Robot Interaction: depENDability and Safety" (PHRIENDS). PHRIENDS is about developing key components of the next generation of robots, including industrial robots and assist devices, designed to share the environment and to physically interact with people. The philosophy of the project proposes an integrated approach to the co-design of robots for safe physical interaction with humans, which revolutionizes the classical approach for designing industrial robots – rigid design for accuracy, active control for safety – by creating a new paradigm: design robots that are intrinsically safe, and control them to deliver performance. This paper presents the state of the art in the field as surveyed by the PHRIDOM project, as well as it enlightens a number of challenges that will be undertaken within the PHRIENDS project.