MoS2/rGO composites were synthesized by hydrothermal method from the precursors of MoS2 and reduced graphene oxide (rGO) prepared in the former steps. The influence of the synthesis conditions including hydrothermal temperature and mass ratio of MoS2 to rGO on the structure, morphology, and optical absorption capacity of the MoS2/rGO composites was systematically investigated using physicochemical characterizations. The photocatalytic performance of as-prepared samples was investigated on the degradation of Rhodamine B under visible light, in which, the composites obtained at hydrothermal temperature of 180C and MoS2/rGO mass ratio of 4/1 exhibited the highest photodegradation efficiency of approx. 80 after 4 hours of reaction. This enhancement in photocatalytic behaviour of composites could be assigned to the positive effect of rGO in life time expansion of photoinduced electronsholes.
The n%Mn-MoS2/rGO (labeled as n%MMS/rGO, where n% = Mn/(Mn + Mo) in mol) composites were successfully prepared by a facile hydrothermal method from the Mn-MoS2 (MMS) and rGO precursors, in which the MMS was obtained by a facile one-step calcination of (NH4)6Mo7O24·4H2O, (NH2)2CS, and Mn(CH3COO)2·4H2O as precursors in N2 gas at 650°C. The samples were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron paramagnetic resonance spectroscopy (EPR), UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), and X-ray photoelectron spectroscopy (XPS), which indicates the composites containing nanosheets of Mn-MoS2 and rGO components. The photocatalytic activities of the n%MMS/rGO composite photocatalysts were evaluated through the photodegradation of rhodamine B (RhB) under the visible light irradiation. The enhancement in the photocatalytic performance of the achieved composites was attributed to the synergic effect of Mn doping and rGO matrix. The investigation of photocatalytic mechanism was also conducted.
Nanostructures of titanium nitride (TiN) have recently been considered as a new class of plasmonic materials that have been utilized in many solar energy applications. This work presents the synthesis of a novel nanostructure of TiN that has a nanodonut shape from natural ilmenite ore using a low-cost and bulk method. The TiN nanodonuts exhibit strong and spectrally broad localized surface plasmon resonance absorption in the visible region centered at 560 nm, which is well suited for thermoplasmonic applications as a nanoscale heat source. The heat generation is investigated by water evaporation experiments under simulated solar light, demonstrating excellent solar light harvesting performance of the nanodonut structure.
A low-cost and simplistic approach for the synthesis of nanosized SO42-/TiO2 photocatalyst was successfully performed using Binh Dinh ilmenite ore and H2SO4 as titanium and sulfur sources, respectively. The experimental results indicate that the obtained material exists in the form of particles with a size of about 22nm and has a specific surface area of about 49m2g-1. Compared with the TiO2 sample, the SO42-/TiO2 sample shows much higher photocatalytic degradation of rhodamine B (RhB) under the sunlight irradiation. In more details, the nanosized SO42-/TiO2 sample obtained is capable of completely decomposing RhB after 9 hours of irradiation by a 60W LED lamp with a corresponding intensity of 9,500 Lux. However, when the SO42-/TiO2 is irradiated by the sunlight with the intensity of 65,000 Lux, it only takes 2 hours to completely decompose rhodamine B (RhB), facilitating the use of SO42-/TiO2 as a potential photocatalyst for the RhB photodegradation.
30 September 2026 in Vietnam Journal of Catalysis and Adsorption
The development of novel catalysts for hydrogen evolution reaction (HER) is crucial in clean energy production technology. In this study, Cu2[Fe(CN)6] (CuFe PB), a Prussian blue analogue (PBA) and Ni-modified CuFe PB (Ni-CuFe PB) were synthesized by co-precipitation. The structural, compositional, and morphological characteristics of the materials were investigated using XRD, FT-IR, SEM, and EDS techniques. The results showed that the Ni-modified materials possess a network without altering the characteristic crystal structure of Prussian blue. The Ni modification also created more active centers, favorable for electrochemical processes. The HER catalytic activity was evaluated in a 0.5 M H2SO4 electrolyte. Compared to the CuFe PB sample, the optimized Ni-CuFe PB material exhibited better electrocatalytic activity, with the overpotential at a current density of 10 mA.cm-2 decreasing by approximately 100 mV. These results demonstrate that transition metal modification is an effective approach to improving the catalytic performance of PBAs materials in electrochemical hydrogen production applications.