In order to realize the ultraviolet (UV) protection property and antimicrobial activity simultaneously, as well as the natural dyeing process, oak bark extract was prepared and applied to dye tussah silk fabric. The effects of dyeing pH value, temperature, time and mordant kinds on dyeing properties of tussah silk fabric were analyzed. The results indicated that the optimum direct dyeing conditions were as follows: pH 5.0, temperature 98℃, time 80 min. As for the mordant dyeing process, the K/S values of the post-mordant dyed samples were higher than those of the pre-mordant dyed samples. The color of the direct, aluminum potassium sulfate, copper sulfate and the ferrous sulfate dyed samples were brown, yellow-brown, dark brown and gray black, respectively. The washing, rubbing and light fastness of the three mordants dyed samples were all good. Moreover, the dyed samples showed an excellent UV protection property and antimicrobial activity. The UV protection factor values of the mordant dyed sample were more than 40; the reduction in bacterial count percent against S. aureus and E. coli reached up to and above 85% and 80%, respectively; and the weight gain rate was more than 6%. Furthermore, the dyed samples had good washing durability of the UV protection function and antimicrobial activity even after 50 consecutive launderings.
Three dimensional (3D) heteroatom-doped active carbon as a flexible supercapacitor electrode is explored with a starting material of silkworm fibers and low molecular weight phenol resin composite. The silk fiber offers a 3D interconnected network and high content of oxygen and nitrogen functionalities, leading to a unique hierarchical structure and a high performance of the electrode. The combination of phenolic resin with silk fibers increases mechanical robustness and specific capacitance of the composite. The porous carbon composite electrode shows a high gravimetric specific capacitance of 239 F g−1 and areal specific capacitance of 637 mF cm−2 at a current density of 0.57 A g−1. The flexible solid-state supercapacitor assembled with two electrodes in Na2SO4/PVA gel electrolyte exhibits an energy density of 17.2 W h kg−1 at a power density of 207 W kg−1. The capacitance retention of 116% after 10 000 charge–discharge cycles over a voltage range of 1.6 V illustrates the excellent cyclic stability of the supercapacitors and indicates great potential applications for energy storage devices.
At present, Antheraea pernyi silk fibroin (ASF) has attracted research efforts to investigate it as a raw material for fabrication of biomedical devices because of its superior cytocompatibility. Nevertheless, native ASF is not easily processed into a hydrogel without any crosslinking agent, and a single hydrogel shows poor mechanical properties. In this paper, a series of ASF/poly (N-isopropylacrylamide) (PNIPAAm) composite hydrogels with different ASF contents were manufactured by a simple in situ polymerization method without any crosslinking agent. Meanwhile, the structures, morphologies and thermal properties of composite hydrogels were investigated by XRD, FTIR, SEM, DSC and TGA, respectively. The results indicate that the secondary structure of silk in the composite hydrogel can be controlled by changing the ASF content and the thermal stability of composite hydrogels is enhanced with an increase in crystalline structure. The composite hydrogels showed similar lower critical solution temperatures (LCST) at about 32 °C, which matched well with the LCST of PNIPAAm. Finally, the obtained thermosensitive composite hydrogels exhibited enhanced mechanical properties, which can be tuned by varying the content of ASF. This strategy to prepare an ASF-based responsive composite hydrogel with enhanced mechanical properties represents a valuable route for developing the fields of ASF, and, furthermore, their attractive applications can meet the needs of different biomaterial fields.
Hierarchical N- and O-doped porous carbon composites were prepared by hydrothermally assembling of silk fibers with low molecular weight phenolic resin, followed by carbonization and KOH activation process. Silk fibroin is expected to provide nitrogen and oxygen functionalities for the final composite carbon. The introduction of thin layer graphitic structures of low molecular weight phenolic resin-derived carbon offers more abundant structures, low resistance, and hierarchical porosity with a high BET surface area of 1927 m2·g−1. The composition and electrochemical properties of the composite carbon have been studied as a function of the annealing temperature for KOH activation process. The obtained carbon composite exhibits high specific capacitance as high as 330 F·g−1 (1000 mF·cm−2) at 0.5 A·g−1, good rate capability, and excellent cycling stability (91% of capacitance retention after 10000 cycles) in 6 M KOH electrolyte.
The hard-healing chronic wounds of diabetics are still one of the most intractable problems in clinical skin injury repair. Wound microenvironments directly affect wound healing speed, but conventional dressings exhibit limited efficacy in regulating the wound microenvironment and facilitating healing. To address this serious issue, we designed a thermo-sensitive drug-controlled hydrogel with wound self-adjusting effects, consisting of a sodium alginate (SA), Antheraeapernyi silk gland protein (ASGP) and poly(N-isopropylacrylamide) (PNIPAM) for a self-adjusting microenvironment, resulting in an intelligent releasing drug which promotes skin regeneration. PNIPAM has a benign temperature-sensitive effect. The contraction, drugs and water molecules expulsion of hydrogel were generated upon surpassing lower critical solution temperatures, which made the hydrogel system have smart drug release properties. The addition of ASGP further improves the biocompatibility and endows the thermo-sensitive drug-controlled hydrogel with adhesion. Additionally, in vitro assays demonstrate that the thermo-sensitive drug-controlled hydrogels have good biocompatibility, including the ability to promote the adhesion and proliferation of human skin fibroblast cells. This work proposes an approach for smart drug-controlled hydrogels with a thermo response to promote wound healing by self-adjusting the wound microenvironment.
About Me
Lu Yanhua, Ph.D., is a Professor at Soochow University
Lu Yanhua, Ph.D., is a Professor at Soochow University