Hydro-floating ship lifts are a milestone in the field of high dam navigation. In order to ensure the running safety of a hydro-floating ship lift, the effective integration of a numerical simulation method and cloud model theory was carried out to deal with the hydrodynamic risks presented by water surface deviations from the shafts in the filling–emptying system such as a lock. In this study, the average values of water surface deviation from the shafts were 0.2, 0.22 and 0.24 m, through numerical simulation on a similar hydro-floating ship lift at the lifting heights of 80, 100 and 120 m, respectively. An increase in the lifting height causes the water surface deviation from the shafts to increase, and the hydrodynamic risk is greatly increased in the equal inertial pipeline filling–emptying system. In addition, the water surface deviations from the shafts of the equal inertial pipeline and longitudinal culvert filling–emptying system like a lock were compared. The longitudinal culvert was better at optimizing running safety in the filling–emptying system and dealing with the uncertainty of water surface deviation from the shafts. The results show that the numerical simulation method and cloud model theory can effectively control the risk of water surface deviation from the shafts and can be used to aid in decision-making for risk prevention in relation to hydro-floating ship lifts.

As a new type of unconventional natural gas resource, shale gas plays a vital role in energy supply. In order to deeply understand the shale fracture seepage characteristics, filled and unfilled fracture seepage tests were carried out on shale samples with different fracture surface topography with the use of self-developed shale fracture seepage testing equipment. The fitting formula that the seepage discharge decreased as a negative exponential function with the increase in normal stress was obtained in the unfilled fracture seepage test; the fitting coefficient had a good logarithmic and exponential function relationship with joint roughness coefficient JRC and surface development interface area ratio S_dr. Meanwhile, the modified cubic law was obtained by adding the correction coefficient. The correction coefficient had an exponential relationship with the anisotropy value K_a. Compared with the unfilled one, the fracture surface topography had little effect on the seepage discharge when it was filled. The experimental results show the effects of water head difference, fracture surface topography, particle size, and thickness of filling sand on shale fracture seepage characteristics under different normal stress conditions, which have a certain significance for improving the efficiency of shale gas production.