Flexible electronics is a rapidly growing technology for a multitude of applications. Wearables and flexible displays are some application examples. Various technologies and processes are used to produce flexible electronics. An important aspect to be considered when developing these systems is their reliability, especially with regard to repeated bending. In this paper, the frequently used methods for investigating the bending reliability of flexible electronics are presented. This is done to provide an overview of the types of tests that can be performed to investigate the bending reliability. Furthermore, it is shown which devices are developed and optimized to gain more knowledge about the behavior of flexible systems under bending. Both static and dynamic bending test methods are presented.
The assembly of passive components on flexible electronics is essential for the functionalization of circuits. For this purpose, adhesive bonding technology by isotropic conductive adhesive (ICA) is increasingly used in addition to soldering processes. Nevertheless, a comparative study, especially for bending characterization, is not available. In this paper, soldering and conductive adhesive bonding of 0603 and 0402 components on flexible polyimide substrates is compared using the design of experiments methods (DoE), considering failure for shear strength and bending behavior. Various solder pastes and conductive adhesives are used. Process variation also includes curing and soldering profiles, respectively, amount of adhesive, and final surface metallization. Samples created with conductive adhesive H20E, a large amount of adhesive, and a faster curing profile could achieve the highest shear strength. In the bending characterization using adhesive bonding, samples on immersion silver surface finish withstood more cycles to failure than samples on bare copper surface. In comparison, the samples soldered to bare copper surface finish withstood more cycles to failure than the soldered samples on immersion silver surface finish.
Space applications demand highly reliable, low weight systems. 3-dimensional moulded interconnect device (3D-MID) processes have the potential to fulfil the requirements by combining the (electronic) packaging with routing and mechanical structures. In this paper 3D-MID technology is reviewed, most promising techniques identified and test vehicles investigated with the focus on their future use in space. This work is performed within the ESA Artes 5.1 programme.
2 August 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
System-in-foil technology continues to realize relevance in industry and research. In this paper, a digital process chain for the fabrication of bend-sensitive sensor structures on a flexible polyimide foil is described. This means, that none of the steps in this process chain requires the manufacturing of a structured mask or cliché. Therefore, an arbitrary layout can be manufactured and easily be changed without major effort. Patterning of the sensor layout is realized by direct imaging of a laminated dry film photoresist. The sensor structure is fabricated by a lift-off process using sputtering of a NiCr layer. Finally, the sensor structures are characterized by a static bending test.