After the “5·12” Wenchuan earthquake in 2008, collapses and landslides have occurred continuously, resulting in the accumulation of a large quantity of loose sediment on slopes or in gullies, providing rich material source reserves for the occurrence of debris flow and flash flood disasters. Therefore, it is of great significance to build a collapse and landslide susceptibility evaluation model in Wenchuan County for local disaster prevention and mitigation. Taking Wenchuan County as the research object and according to the data of 1081 historical collapse and landslide disaster points, as well as the natural environment, this paper first selects six categories of environmental factors (13 environmental factors in total) including topography (slope, aspect, curvature, terrain relief, TWI), geological structure (lithology, soil type, distance to fault), meteorology and hydrology (rainfall, distance to river), seismic impact (PGA), ecological impact (NDVI), and impact of human activity (land use). It then builds three single models (LR, SVM, RF) and three CF-based hybrid models (CF-LR, CF-SVM, CF-RF), and makes a comparative analysis of the accuracy and reliability of the models, thereby obtaining the optimal model in the research area. Finally, this study discusses the contribution of environmental factors to the collapse and the landslide susceptibility prediction of the optimal model. The research results show that (1) the areas prone to extremely high collapse and landslide predicted by the six models (LR, CF-LR, SVM, CF-SVM, RF and CF-RF) have an area of 730.595 km², 377.521 km², 361.772 km², 372.979 km², 318.631 km², and 306.51 km², respectively, and the frequency ratio precision of collapses and landslides is 0.916, 0.938, 0.955, 0.956, 0.972, and 0.984, respectively; (2) the ranking of the comprehensive index based on the confusion matrix is CF-RF>RF>CF-SVM>CF-LR>SVM>LR and the ranking of the AUC value is CF-RF>RF>CF-SVM>CF-LR>SVM>LR. To a certain extent, the coupling models can improve precision more over the single models. The CF-RF model ranks the highest in all indexes, with a POA value of 257.046 and an AUC value of 0.946; (3) rainfall, soil type, and distance to river are the three most important environmental factors, accounting for 24.216%, 22.309%, and 11.41%, respectively. Therefore, it is necessary to strengthen the monitoring of mountains and rock masses close to rivers in case of rainstorms in Wenchuan county and other similar areas prone to post-earthquake landslides.

The Three Gorges Reservoir region in China is the Yangtze River Economic Zone’s natural treasure trove. Its natural environment has an important role in development. The unique and fragile ecosystem in the Yangtze River’s Three Gorges Reservoir region is prone to natural disasters, including soil erosion, landslides, debris flows, landslides, and earthquakes. Therefore, to better alleviate these threats, an accurate and comprehensive assessment of the susceptibility of this area is required. In this study, based on the collection of relevant data and existing research results, we applied machine learning models, including logistic regression (LR), the random forest model (RF), and the support vector machine (SVM) model, to analyze landslide susceptibility in the Yangtze River’s Three Gorges Reservoir region to analyze landslide events in the whole study region. The models identified five categories (i.e., topographic, geological, ecological, meteorological, and human engineering activities), with nine independent variables, influencing landslide susceptibility. The accuracy of landslide susceptibility derived from different models and raster cells was then verified by the accuracy, recall, F1-score, ROC curve, and AUC of each model. The results illustrate that the accuracy of different machine learning algorithms is ranked as SVM > RF > LR. The LR model has the lowest generalization ability. The SVM model performs well in all regions of the study area, with an AUC value of 0.9708 for the entire Three Gorges Reservoir area, indicating that the SVM model possesses a strong spatial generalization ability as well as the highest robustness and can be adapted as a real-time model for assessing regional landslide susceptibility.

Landslides, the second largest geological hazard after earthquakes, result in significant loss of life and property. Extracting landslide information quickly and accurately is the basis of landslide disaster prevention. Fengjie County, Chongqing, China, is a typical landslide-prone area in the Three Gorges Reservoir Area. In this study, we newly integrate Shapley Additive Explanation (SHAP) and Optuna (OPT) hyperparameter tuning into four basic machine learning algorithms: Gradient Boosting Decision Tree (GBDT), Extreme Gradient Boosting (XGBoost), Light Gradient Boosting Machine (LightGBM), and Additive Boosting (AdaBoost). We construct four new models (SHAP-OPT-GBDT, SHAP-OPT-XGBoost, SHAP-OPT-LightGBM, and SHAP-OPT-AdaBoost) and apply the four new models to landslide extraction for the first time. Firstly, high-resolution remote sensing images were preprocessed, landslide and non-landslide samples were constructed, and an initial feature set with 48 features was built. Secondly, SHAP was used to select features with significant contributions, and the important features were selected. Finally, Optuna, the Bayesian optimization technique, was utilized to automatically select the basic models’ best hyperparameters. The experimental results show that the accuracy (ACC) of these four SHAP-OPT models was above 92% and the training time was less than 1.3 s using mediocre computational hardware. Furthermore, SHAP-OPT-XGBoost achieved the highest accuracy (96.26%). Landslide distribution information in Fengjie County from 2013 to 2020 can be extracted by SHAP-OPT-XGBoost accurately and quickly.

Vision transformers (ViTs) are increasingly utilized for HSI classification due to their outstanding performance. However, ViTs encounter challenges in capturing global dependencies among objects of varying sizes, and fail to effectively exploit the spatial–spectral information inherent in HSI. In response to this limitation, we propose a novel solution: the multi-scale spatial–spectral transformer (MSST). Within the MSST framework, we introduce a spatial–spectral token generator (SSTG) and a token fusion self-attention (TFSA) module. Serving as the feature extractor for the MSST, the SSTG incorporates a dual-branch multi-dimensional convolutional structure, enabling the extraction of semantic characteristics that encompass spatial–spectral information from HSI and subsequently tokenizing them. TFSA is a multi-head attention module with the ability to encode attention to features across various scales. We integrated TFSA with cross-covariance attention (CCA) to construct the transformer encoder (TE) for the MSST. Utilizing this TE to perform attention modeling on tokens derived from the SSTG, the network effectively simulates global dependencies among multi-scale features in the data, concurrently making optimal use of spatial–spectral information in HSI. Finally, the output of the TE is fed into a linear mapping layer to obtain the classification results. Experiments conducted on three popular public datasets demonstrate that the MSST method achieved higher classification accuracy compared to state-of-the-art (SOTA) methods.

Gridded precipitation data with a high spatiotemporal resolution are of great importance for studies in hydrology, meteorology, and agronomy. Observational data from meteorological stations cannot accurately reflect the spatiotemporal distribution and variations of precipitation over a large area. Meanwhile, radar-derived precipitation data are restricted by low accuracy in areas of complex terrain and satellite-based precipitation data by low spatial resolution. Therefore, hourly precipitation models were employed to merge data from meteorological stations, Radar, and satellites; the models used five machine learning algorithms (XGBoost, gradient boosting decision tree, random forests (RF), LightGBM, and multiple linear regression (MLR)), as well as the CoKriging method. In the north of Guangdong Province, data of four heavy rainfall events in 2018 were processed with geographic data to obtain merged hourly precipitation data. The CoKriging method secured the best prediction of spatial distribution of accumulated precipitation, followed by the tree-based machine learning (ML) algorithms, and significantly, the prediction of MLR deviated from the actual pattern. All machine learning methods showed poor performances for timepoints with little precipitation during the heavy rainfall events. The tree-based ML method showed poor performance at some timepoints when precipitation was over-related to latitude, longitude, and distance from the coast.