In the present work, multiple-wall carbon nanotubes (MWCNTs) were surface modified in an environmentally friendly way, using low-frequency ultrasonic energy. This type of modification was carried-out using two different types of organic acids, citric acid (CA) and oxalic acid (OA). The modification of the MWCNTs was confirmed by Fourier-transform infrared spectroscopy (FTIR), where functional groups such as OH, C=O, O–C=O and COOH were detected. By means of Raman spectroscopy, an increase in carbon surface defects was found. On the other hand, using X-ray photoelectron spectroscopy (XPS), oxidation was evidenced on the surface of the modified MWCNT. In both Raman spectroscopy and XPS, the results indicate a greater modification when CA is used, possibly due to the fact that CA has a larger number of functional groups. MWCNT-CA showed good dispersion in methanol, while MWCNT-OA showed good stability in methanol and ethanol. Finally, a 20% removal of creatinine efficiency improvement was found with respect to the unmodified MWCNTs, while no improvement was found in the case of urea and uric acid.
1 January 2024 in International Journal of Biomaterials
The high degree of chemical modification of the chitosan chains due to protonated amine groups allows them to react with many negatively charged surfaces as anionic polymers and cell membranes, resulting in an attractive material for medical and pharmaceutics applications. Incorporating ionic iodine (I− and ) on chitosan chains is a direct way to successfully obtain chitosan‐iodine nanoparticles (CSNPs‐I and CSNPs‐IO3) through ionic gelation. The nanoparticles (NPs) present a hemispherical morphology with sizes around 30–70 nm for CSNPs‐I and CSNPs‐IO3, similar to chitosan NPs, in accordance with SEM and DLS techniques. The XRD characterization did not show noticeable differences in the crystallinity index (CI) for CSNPs and CSNPs‐I, 48.4 and 49.3%, respectively, but for CSNPs‐IO3, the CI decreased to 43.85%. The cytotoxic effects on human tumor cells of chitosan and iodine‐modified chitosan nanoparticles (CSNPs‐I and CSNPs‐IO3) were evaluated for 24 h in a range from 0.15 mg/mL to 0.95 mg/mL concentrations, where CSNPs‐IO3 presented the lower viability for lung cancer A549, followed by cervical cancer HeLa cell and finally breast cancer MDA‐MB‐231, with a weight content of iodate ion in a range of 8.7 to 15 μg. This work presents the possibility of exploring chitosan‐iodine NPs in medical applications.
The contamination of water bodies by dye effluents from micro-scale in-house denim laundries remains a significant environmental concern in central México, particularly in the Atoyac River, where conventional treatment methods are not economically viable. This study develops and evaluates Nylon-6/pumice powder (PPw) nonwoven composites as hybrid adsorptive membranes for the removal of methylene blue (MB) from aqueous solutions. Pumice, a locally abundant siliceous mineral, was incorporated into Nylon-6 through melt-compounding and melt-blown fiber processing at 1 wt% and 5 wt% loadings. SEM, XRD, and TGA confirmed even filler distribution, structural stability, and the development of a porous, layered structure. Batch adsorption tests revealed a rapid initial dye adsorption, followed by a slower diffusion-controlled phase, with equilibrium achieved within 15 min for PPw and within 30 min for the composites. The data fitted both Langmuir and Freundlich isotherms, indicating that MB adsorption involved a combined mechanism: monolayer adsorption on uniform silanol/aluminol sites and multilayer physical adsorption at the polymer–mineral interfaces. Higher PPw content increased adsorption capacity (qmax = 1.1460 mg/g) and surface uniformity, resulting in favorable Freundlich exponents (n = 2). Finally, it was found that adsorption proceeds via chemisorption, where the pumice powder provides reactive sites. These findings demonstrate that Nylon-6/PPw nonwoven composites combine the strength of a synthetic material with the surface reactivity of a natural mineral, providing an effective and scalable Nature-Based Solution for decentralized dye removal, aligned with Sustainable Development Goals 6 and 12.