Modelling and Simulation Resolution of Ground-Penetrating Radar Antennas Antenna;FDTD;GPR;Modelling;Simulation;Resolution; The problem of resolution in antenna ground-penetrating radar (GPR) is very important for the investigation and detection of buried targets. We should solve this problem with software or a numeric method. The purposes of this paper are the modelling and simulation resolution of antenna radar GPR using three antennas, arrays (as in the software REFLEXW), the antenna dipole (as in GprMax2D), and a bow-tie antenna (as in the experimental results). The numeric code has been developed for study resolution antennas by scattered electric fields in mode B-scan. Three frequency antennas (500, 800, and 1,000 MHz) have been used in this work. The simulation results were compared with experimental results obtained by Rial and colleagues under the same conditions.

The aim of this work is to study and explore the causes of the landslide in different locations using Ground Penetrating Radar (GPR) technology. GPR uses the electromagnetic method related the high-frequency pulse that used widely in various field. The experimental study focused on the investigation of the landslide in the road by GPR method with antenna 200 MHz. The landslides become serious problems and required various technique and methods to investigate it in several places. GPR measurements present a useful technique for studies and investigation of the problem. The GPR can be categorized in the first place as an experimental method surveys landslide depths were recognized at 1-10 m below the natural terrain level. The results obtained revealed the causes of landslides on the road.