Generally, automobiles are typically equipped with separate headlamp lanterns for generating low- and high-beam light. Compared with separate headlamp lanterns, a single headlamp producing both low- and high-beam light can be more compact and have less mechanical complexity. The single headlamp structure has become a main emphasis of research that manufacturers will continue to focus great efforts on in the future. A novel design of a single headlamp generating both low- and high-beam light is proposed in this study. The proposed headlamp consists of a compound ellipsoidal reflector, a baffle plate, a condenser lens, and LED array devices generating low- and high-beam light. The compound ellipsoidal reflector comprises a primary ellipsoidal reflector for generating low-beam light and a secondary ellipsoidal reflector for generating high-beam light. Monte Carlo ray tracing simulations were performed to confirm the optical characteristics of the proposed design. A prototype of the proposed headlamp was also fabricated and assembled to verify the design’s effectiveness. The simulated and measured illuminance distributions of the low-beam and high-beam light had the desired light patterns. Moreover, all the simulated and measured illuminances of each point and line met the ECE R112 regulation for low-beam and high-beam light. The proposed headlamp in this study is feasible for the application of single headlamp generating both low- and high-beam light.

In this study, a negative replica layer of leaf surface microstructures was used to cover the top surfaces of semitransparent thin-film luminescent solar concentrators (LSCs) to enhance the concentrators’ performance. With low reflection on the air–glass interface of the glass plate in a thin-film LSC, a negative replica layer enables the scattering of incident sunlight and increases the path of light transmitted into the LSC and the thin phosphor layer at the bottom surface of the LSC. The incident sunlight is therefore more likely to interact with the phosphor particles in the thin-film phosphor layer, thereby enhancing the performance of the LSC. In this study, semitransparent thin-film LSCs with different inorganic phosphors were examined. The experimental results revealed that the optical collection efficiency of semitransparent thin-film LSCs covered with negative replica layers of leaf surface microstructures was higher than that of the semitransparent thin-film LSCs without negative replica layers. Furthermore, the LSCs with negative replica layers with high haze ratios exhibited high optical collection efficiency. Integrating negative replica layers of leaf surface microstructures as semitransparent layers in thin-film LSCs may optimize the application of LSCs in building-integrated photovoltaics (BIPVs).

In this article, a cylindrical rod phosphor structure was developed and used for laser-driven white lighting. The blue light emitting from the laser diode (LD) with limited divergence enters the cylindrical rod containing phosphor and excites the yellow phosphor particles in the cylindrical rod to generate white light. Multiple phosphor blends with yellow and red phosphors were also applied to the cylindrical rod phosphor structure to enhance the red luminescence of white light with a low correlated color temperature (CCT). An advanced structure with a surrounding transparent layer around the central cylindrical rod containing phosphors was also investigated to enhance the possibility of the blue light absorption by phosphors in the cylindrical rod region away from the LD. The cylindrical rod phosphor structures with or without the surrounding transparent layer were fabricated to produce laser-driven white lighting, and the optical characteristics of the cylindrical rod phosphor structures with different phosphor concentrations or yellow-to-red phosphor weight ratios were examined.

In this study, we introduce a novel design of a remote edge-lit backlight structure featuring blue laser diodes (LDs). These LDs were integrated into a remote yellow phosphor layer on a light guide plate (LGP). Blue light emitted by the LDs passes through the LGP and spreads to the remote phosphor layer, generating white light output. Owing to the incorporation of a scattering layer between sequential LGPs, the remote edge-lit backlight structure facilitates the expansion of the output surface of the LGP by combining multiple individual LGPs. Two- and three-LGP remote edge-lit backlight structures demonstrated acceptable white illuminance uniformity. The proposed architecture serves as a viable solution for achieving uniform illumination in planar lighting systems using blue LDs; thus, this structure is particularly suitable for linear lighting or slender backlighting instead of display stand applications.

We explored the use of biomimetic structures, including those that mimic leaf structures, to enhance the angular color uniformity of flat phosphor-converted light-emitting diodes (pcLEDs). The distinct microstructures found on natural leaf surfaces, such as micro-scale bumps, ridges, and hierarchical patterns, have inspired the design of artificial microstructures that can improve light extraction, scattering, and overall optical performance in LED applications. The effects of these leaf surface microstructures on the phosphor layer of flat pcLEDs were evaluated. An imprinting technique was employed to directly replicate the surface morphology structures from fresh plant leaves. The results indicated that this method provided excellent scattering capability and reduced the disparity in light output between blue and yellow light emissions from flat pcLEDs at various angles. Subsequently, uniform correlated color temperature in the flat pcLEDs was achieved, reducing the yellow ring effect. Furthermore, the availability of diverse wrinkle and surface patterns from a wide range of natural prototypes could reduce design costs compared with traditional mold fabrication, making the method suitable for application in mass production.

Building-integrated photovoltaics (BIPVs) enable the seamless incorporation of solar energy systems into architectural structures. Luminescent solar concentrators (LSCs) represent a technology that offers a promising route for semitransparent solar harvesting. In this study, phycocyanin, a bio-derived luminescent material extracted from the extremophilic red alga Cyanidioschyzon merolae, was used as the emissive layer in thin-film LSCs to achieve a sustainable BIPV system. This material exhibited high transparency, strong red fluorescence, and notable stability under illumination conditions, primarily attributable to its unique pigment–protein structure. Thin-film LSCs incorporating phycocyanin at various weight ratios were fabricated and evaluated under simulated sunlight conditions. These concentrators demonstrated efficient photon collection and maintained stable optical performance during solar exposure. Overall, these findings underscore the potential of phycocyanin derived from C. merolae as an eco-friendly and renewable alternative to conventional organic or synthetic luminophores, which can advance the development of sustainable and efficient LSC systems for next-generation BIPV applications.