Recycling of lithium-ion batteries will become imperative in the future, but comprehensive and sustainable processes for this are still rather lacking. Direct recycling comprising separation of the black mass components as a key step is regarded as the most seminal approach. This paper contributes a novel approach for such separation, that is fractionation in a tubular centrifuge. An aqueous dispersion of cathode materials (lithium iron phosphate, also referred to as LFP, and carbon black) serves as exemplary feed to be fractionated, desirably resulting in a sediment of pure LFP. This paper provides a detailed study of the commonly time-dependent output of the tubular centrifuge and introduces an approach aiming to achieve constant output. Therefore, three different settings are assessed, constantly low, constantly high and an increase in rotational speed over time. Constant settings result in the predictable unsatisfactory time-variant output, whereas rotational speed increase proves to be able to maintain constant centrate properties. With further process development, the concept of fractionation in tubular centrifuges may mature into a promising separation technique for black mass in a direct recycling process chain.
One of the major challenges of metal-air batteries is the impeded oxygen reduction reaction (ORR) during discharge occurring at the gas diffusion electrode (GDE) of the battery. Due to the impeded ORR, high overpotentials emerge and result in a loss of energy efficiency. In order to improve the latter, suitable catalysts have to be employed. Transition metal oxides like manganese oxides (e.g., MnO2, Mn2O3, Mn3O4, Mn5O8, MnOOH) [1,2] are known as good and inexpensive materials for the ORR in alkaline media. A drawback of manganese oxide catalysts is the poor electrical conductivity. Hence, the approach presented in this work aims to enhance the catalytic activity of Mn3O4 and γ–MnO2 by the incorporation of conductive carbon material into the pure manganese oxide. The resulting hybrid catalysts are prepared either by impregnation of Super C 65, Vulcan XC 72, and Kuraray YP 50F via a sol-gel technique employing a MnO2 precursor sol or by direct precipitation of Mn3O4 or γ–MnO2 particles in the presence of the carbon materials mentioned above. Investigations by rotating disc electrode (RDE) show a noticeably higher catalytic activity of the hybrid catalysts than for the pure materials. For verification of the results measured by RDE, screen printed GDEs are prepared and tested in Zn-air full cells.