Nanoelectronic devices based on electron spin can overcome the physical limitations of the present semiconductor technology because of their low power consumption while exploiting the spin degree of freedom of electrons. Although enhancing the efficiency of generation of the spin current is imperative and a primary issue for the practical application of spin-based electronics, seamless device integration with the conventional complementary metal-oxide semiconductor technology is another important milestone for developing spin-based nanoelectronics. In particular, the preparation of nanosized, magnetic, multilayered structures with electrical connections to individual complementary metal-oxide semiconductor circuits significantly complicates the fabrication procedure of nanoelectronic devices. Thermal spin injection, which is a recently discovered unique characteristic of spin current, may be an innovative method for simplifying device integration without the need for electricity, namely wireless spintronics. However, the feasibility of using the thermal spin injection method is poor because of its extremely low-generation efficiency. Here, we demonstrate that a highly spin-polarized, ferromagnetic CoFeAl electrode with a favorable band structure has excellent properties for thermal spin injection. The spin-dependent Seebeck coefficient is approximately 70 μV K−1, which facilitates highly efficient generation of the spin current from heat. The heat generates approximately 100 times more spin voltage than a conventional ferromagnetic injector at room temperature. This innovative demonstration may open a new route for spin-device integration and its applications.
We have observed unconventional asymmetric field dependence of the nonlocal spin signal under a high dc bias current injection. From the systematic studies on the bias current and the field-direction dependencies of the nonlocal signals, the origin of the asymmetry is understood as the anomalous Nernst-Ettingshausen effect driven by the bias current. The bias current dependencies of the spin accumulation signal and the background resistance are also well explained by the thermal effects induced by the bias current.
We demonstrate the injection and detection of electrically and thermally generated spin currents probed in Co2MnSi/Cu lateral spin valves. Devices with different electrode separations are patterned to measure the non-local signal as a function of the electrode spacing and we determine a relatively high effective spin polarization α of Co2MnSi to be 0.63 and the spin diffusion length of Cu to be 500 nm at room temperature. The electrically generated non-local signal is measured as a function of temperature and a maximum signal is observed for a temperature of 80 K. The thermally generated non-local signal is measured as a function of current density and temperature in a second harmonic measurement detection scheme. We find different temperature dependences for the electrically and thermally generated non-local signals, which allows us to conclude that the temperature dependence of the signals is not just dominated by the transport in the Cu wire, but there is a crucial contribution from the different generation mechanisms, which has been largely disregarded till date.
The atomic layer technique is generating a lot of excitement and study due to its profound physics and enormous potential in device fabrication. This article reviews current developments in atomic layer technology for spintronics, including atomic layer deposition (ALD) and atomic layer etching (ALE). To begin, we introduce the main atomic layer deposition techniques. Then, in a brief review, we discuss ALE technology for insulators, semiconductors, metals, and newly created two-dimensional van der Waals materials. Additionally, we compare the critical factors learned from ALD to constructing ALE technology. Finally, we discuss the future prospects and challenges of atomic layer technology in the field of spinronics.
We have investigated the dc bias current dependence of the nonlocal spin valve signal in CoFeAl/Cu lateral spin valves. The spin signal is found to increase monotonically with the bias current. Surprisingly, the modulation amplitude from mA to 1 mA exceeds 30 percent of the spin signal at low bias current. From the analysis based on the one-dimensional spin diffusion model and considering the bias-current heating effect, we find that the contribution of the thermal spin injection is much larger than the influence of the reduction of the spin diffusion length due to the Joule heating. We also show that the second harmonic lock-in signal precisely extracts the contribution of the thermal spin injection from the mixed spin signal.