For most existing semiactive systems, it is commonly known that the stability and tracking performance will deteriorate in a real application due to the input constraints and nonlinearity in the system. In this study, in order to overcome the above shortcomings, a novel bench-scale suspension plant using a magnetorheological elastomer (MRE)-based absorber accompanied with an adaptive and global neural-network-based tracking controller is introduced. The adaptive neural network (ANN) is used to estimate the uncertain dynamics of the quarter-car model. The novel scheme consists of three parts, including a conventional ANN controller dominating the active region of neurons, a robust controller serving as a temporary controller to pull back the state into the active region when the neural approximation falls outside, and a switch to be used to monitor the activation of the neural part and switch the control authority between the above two controllers. The controller ensures that a globally uniform ultimate boundedness can be achieved. Furthermore, an auxiliary design system was added to the controller in order to deal with the effects of input constraints, and the state was analyzed for the tracking of the stabilization. The control scheme ensures that the output of the system converges to the vicinity of a reference trajectory and all the signals are globally, uniformly, and ultimately bounded. The simulation and experimental results demonstrate that the proposed controller can effectively suppress the vibrations of the semiactive quarter car.
In this research, a novel variable stiffness vibration isolator that uses magnetorheological elastomers (MREs) accompanied with a fuzzy semiactive vibration control was developed. Firstly, the viscoelastic characteristics of MREs in shear mode were clarified systematically in order to achieve a mathematical basis for the controller development. Secondly, the fuzzy semiactive vibration control with a strategy based on the Lyapunov theory and dynamic characteristic of MREs was proposed for minimizing the movement of the isolator. In the conventional semiactive algorithm, the command applied current of MRE-based isolator is set at either minimum or maximum value which causes high acceleration and jerk peaks periodically, thus leading to the degeneration of the overall system quality. However, the fuzzy semiactive algorithm presented here is able to produce the sufficient applied current and thus viscoelastic force is desirably produced. The effectiveness of the developed isolator was evaluated numerically by MATLAB simulation and experimentally in comparison with the performances of a passive system and a system with on-off type semiactive controller. The results showed that the developed controller was successful in overcoming the disadvantages of conventional on-off semiactive control.
The magnetorheological elastomer (MRE) is a smart material widely used in recent vibration systems. A system using these materials often faces difficulties designing the controller such as unknown parameters, hysteresis state, and input constraints. First, a model is designed for the MRE-based absorber to portray the behavior of MRE and predict the appropriate electric current supplied. The conventional adaptive controller often suffers from so-called control singularities. The singularity-free adaptive controller is proposed to eliminate the singularity with parametric uncertainty. The proposed controller consists of four components: an adaptive linearizing controller, a deputy adaptive neural network controller, an auxiliary part designed for the controller to overcome the input constraint problem, and a smooth switching algorithm used to exchange the takeover rights of the two controllers. Moreover, the controller is designed to obtain the stabilization of hysteretic state estimation for the vibration system. The adaptive algorithms are proposed to update the unknown system parameters and to observe the unmeasurable hysteretic state. Meanwhile, closed-loop system stability is comprehensively assessed. Finally, the simulation performed on a quarter-car suspension with an MRE-based absorber shows the proposed controller's efficiency.
7 February 2024 in Journal of Mechanical Science and Technology