The transition to turbulence in a precessing cylindrical vessel is experimentally investigated. Our measurements are performed for a nearly resonant configuration with an initially laminar flow dominated by an inertial mode with azimuthal wave number m = 1 superimposed on a solid body rotation. By increasing the precession ratio, we observe a transition from the laminar to a non-linear regime, which then breakdowns to turbulence for larger precession ratio. Our measurements show that the transition to turbulence is subcritical, with a discontinuity of the wall-pressure and the power consumption at the threshold ϵLT. The turbulence is self-sustained below this threshold, describing a bifurcation diagram with a hysteresis. In this range of the control parameters, the turbulent flows can suddenly collapse after a finite duration, leading to a definitive relaminarization of the flow. The average lifetime 〈τ〉 of the turbulence increases rapidly when ϵ tends to ϵLT.
The detection of bubbles in liquid metals is important for many technical applications. The opaqueness and the high temperature of liquid metals set high demands on the measurement system. The high electrical conductivity of the liquid metal can be exploited for contactless methods based on electromagnetic induction. We will present a measurement system which consists of one excitation coil and a pickup coil system on the opposite sides of the pipe. With this sensor we were able to detect bubbles in a sodium flow inside a stainless steel pipe and bubbles in a column filled with a liquid Gallium alloy.
We conduct magnetized spherical Couette (MSC) flow experiments in the return flow instability regime with GaInSn as the working fluid, the ratio of the inner to the outer sphere radii ri/ro = 0.5, the Reynolds number Re = 1000, and the Hartmann number Ha ∈ [27.5, 40]. Rotating waves with different azimuthal wavenumbers m ∈ {2, 3, 4} manifest in certain ranges of Ha in the experiments, depending on whether the values of Ha were fixed or varied from different initial values. These observations demonstrate the multistability of rotating waves, which we attribute to the dynamical system representing the state of the MSC flow tending to move along the same solution branch of the bifurcation diagram when Ha is varied. In experiments with both fixed and varying Ha, the rotation frequencies of the rotating waves are consistent with the results of nonlinear stability analysis. A brief numerical investigation shows that differences in the azimuthal wavenumbers of the rotating waves that develop in the flow also depend on the azimuthal modes that are initially excited.
We show and compare the numerical and experimental results on the electromagnetic generation of a tide-like flow structure in a cylindrical vessel, which is filled with the eutectic liquid metal alloy GaInSn. Fields of various strengths and frequencies are applied to drive liquid metal flows. The impact of the field variations on amplitude and structure of the flow is investigated. The results represent the basis for a future Rayleigh–Bénard experiment, in which a modulated tide-like flow perturbation is expected to synchronize the typical sloshing mode of the large-scale circulation and the helicity oscillation connected with it. A similar entrainment mechanism might play a role in the synchronization of stellar dynamos by tidal forces.
The effect of the nutation angle on the flow inside a precessing cylinder is experimentally explored and compared with numerical simulations. The focus is laid on the typical breakdown of the directly forced m =1 Kelvin mode for increasing precession ratio (Poincaré number) and the accompanying transition between laminar and turbulent flows. Compared to the reference case with a 90° nutation angle, prograde rotation leads to an earlier breakdown, while in the retrograde case, the forced mode continues to exist also for higher Poincaré numbers. Depending largely on the occurrence and intensity of an axisymmetric double-roll mode, a kinematic dynamo study reveals a sensitive dependence of the self-excitation condition on the nutation angle and the Poincaré number. Optimal dynamo conditions are found for 90° angle which, however, might shift to slightly retrograde precession for higher Reynolds numbers.
We examine the fluid flow forced by precession of a rotating cylindrical container using numerical simulations and experimental flow measurements with ultrasonic Doppler velocimetry. The analysis is based on the decomposition of the flow field into contributions with distinct azimuthal symmetry or analytically known inertial modes and the corresponding calculation of their amplitudes. We show that the predominant fraction of the kinetic energy of the precession-driven fluid flow is contained only within a few large-scale modes. The most striking observation shown by simulations and experiments is the transition from a flow dominated by large-scale structures to a more turbulent behaviour with the small-scale fluctuations becoming increasingly important. At a fixed rotation frequency (parametrized by the Reynolds number, $Re$ ) this transition occurs when a critical precession ratio is exceeded and consists of a two-stage collapse of the directly driven flow going along with a massive modification of the azimuthal circulation (the zonal flow) and the appearance of an axisymmetric double-roll mode limited to a narrow range of precession ratios. A similar behaviour is found in experiments which make it possible to follow the transition up to Reynolds numbers of $Re\approx 2\times 10^6$ . We find that the critical precession ratio decreases with rotation, initially showing a particular scaling ${\propto }Re^{-({1}/{5})}$ but developing an asymptotic behaviour for $Re\gtrsim 10^5$ which might be explained by the onset of turbulence in boundary layers.