Pre-tunneling exploration for rock mass classification is a common practice in tunneling projects. This study proposes a data-driven approach that allows for rock mass classification. Two machine learning (ML) classification models, namely random forest (RF) and extremely randomized tree (ERT), are employed to classify the rock mass conditions encountered in the Pahang-Selangor Raw Water Tunnel in Malaysia using tunnel boring machine (TBM) operating parameters. Due to imbalance of rock classes distribution, an oversampling technique was used to obtain a balanced training dataset for unbiased learning of the ML models. A five-fold cross-validation approach was used to tune the model hyperparameters and validation-set approach was used for the model evaluation. ERT achieved an overall accuracy of 95%, while RF achieved 94% accuracy, in rightly classifying rock mass conditions. The result shows that the proposed approach has the potential to identify and correctly classify ground conditions of a TBM, which allows for early problem detection and on-the-fly support system selection based on the identified ground condition. This study, which is part of an ongoing effort towards developing reliable models that could be incorporated into TBMs, shows the potential of data-driven approaches for on-the-fly classification of ground conditions ahead of a TBM and could allow for the early detection of potential construction problems.
8 November 2022 in Mining, Metallurgy & Exploration
Underground tunneling results in redistribution of the in-situ stress state. This process can create unstable underground conditions. Tunnel instability can result in fatalities, property damages, project delays, high rehabilitation cost, and can compromise the overall functionality of the excavation. This study assesses the efficiency of the empirically recommended support design of the Pahang-Selangor Water Transfer Tunnel in Peninsular, Malaysia using convergence-confinement (CV-CF) and 2-Dimensional two-dimensional Finite Element Method (FEM). To reduce the effect of subjective uncertainties associated with the rock mass rating system, the lump rating system was replaced with the continuous rating system to classify the rock masses and provide empirical support design for the tunnel. The maximum capacity and stiffness of the support systems were analytically determined using the CV-CF method. The results of the maximum elastic deformation of the support systems were compared to the actual critical internal pressures which show that the empirically recommended support systems can satisfactorily stabilize the underground excavation. The Reliability of the support design, the plastic zones, and total deformations were determined using Phase2. The radius of plastic zones and the maximum total deformations were significantly reduced after the supports were installed. The plastic zones that remained were restricted within the reinforced zones, signifying the effectiveness of the recommended support systems.
1 January 2019 in Geological Society of America Abstracts with Programs