The prediction of loss of position in the offshore industry would allow optimization of dynamic positioning drilling operations, reducing the number and severity of potential accidents. In this paper, the probability of an excursion is determined by developing binary logistic regression models based on a database of 42 incidents which took place between 2011 and 2015. For each case, variables describing the configuration of the dynamic positioning system, weather conditions, and water depth are considered. We demonstrate that loss of position is significantly more likely to occur when there is a higher usage of generators, and the drilling takes place in shallower waters along with adverse weather conditions; this model has very good results when applied to the sample. The same method is then applied for obtaining a binary regression model for incidents not attributable to human error, showing that it is a function of the percentage of generators in use, wind force, and wave height. Applying these results to the risk management of drilling operations may help focus our attention on the factors that most strongly affect loss of position, thereby improving safety during these operations.
A novel efficiency reduction model to tubular heat exchanger based on heat transfer losses by biofilm adhesion is proposed, which included a modified equation based on the real data-dependent time, seawater, hydrodynamics and heat transfer resistance using computational fluid dynamics (CFD). The biofilm growth model based on Verhulst model and experimental data has been obtained and simulated in a CFD software tool to analyze the tubular heat exchanger performance prediction cooled by seawater. The biofilm CFD model with appropriate fit, and the correlation coefficient (R2) values are between 0.97 and 0.99, was validated by experimental data obtained at different flow velocity. The final results of in/outlet difference temperatures were from 3.9 °C to 2.2 °C for different flow velocity with R2 > 0.97. The simulation results demonstrate that the novel CFD model is capable of predicting the efficiency losses during the development period of biofilm growth in in open-loop cooling seawater systems.
A CUSUM chart method is presented as an alternative tool for continuous monitoring of an electromagnetic field-based (EMF) antifouling (AF) treatment of a heat exchanger cooled by seawater. During an initial experimental phase, biofilm growth was allowed in a heat exchanger formed of four tubes until sufficient growth had been established. In two of the tubes, continuous EMF treatment was then applied. The heat transfer resistance and heat duty (heat transfer per unit time) results showed that biofilm adhesion was reduced by the EMF treatment. EMF treatments resulted in a 35% improvement in the heat transfer resistance values. The proposed CUSUM chart method showed that the EMF treatment increased the useful life of the heat exchanger by ∼20 days. Thus, CUSUM charts proved to be an efficient tool for continuous monitoring of an AF treatment using data collected online and can also be used to reduce operation and maintenance costs.
Dynamic positioning systems ensure additional position accuracy in different operations in the maritime industry, such as shuttling, drilling, diving, pipe laying, and others. Although they are known to be robust systems, they are not exempt from failures leading to incidents, among which we can find human-related incidents. This research analyzes 62 human-related dynamic-positioning incidents and aims to determine which segment in the dynamic positioning system influences these occurrences by applying binary logistic regression modeling techniques in the test sample and validating the results using a control sample. The results indicate that thrusters have the most significant influence on human-related incidents; however, not all DP operations are affected in the same measure. By stratifying the database and considering the different operations in progress, it is noted that human-related incidents while drilling operations are in progress are effectively influenced using a higher percentage of thrusters online.
Defrost cycles in shipboard refrigeration plants are typically initiated on fixed schedules or by operator judgement, which can lead to unnecessary energy use and temperature variability during the transport of frozen products. This study proposes a data-driven predictive maintenance approach to trigger defrost on demand in a merchant reefer vessel carrying frozen tuna. A total of 76,692 operational records from cargo-hold air coolers and holds were analysed, including delivery and return air temperatures, hold air temperature and relative humidity. The records were modelled to show their behaviour under real voyage conditions. The modelled strategy indicates that 66.55% of defrost cycles performed during the study period were unnecessary, suggesting substantial scope to reduce defrost frequency and associated disturbances. These findings demonstrate the feasibility of implementing machine learning (ML)-based decision support for maritime refrigeration. This enables defrost-on-demand scheduling, which has the potential to enhance operational efficiency while supporting product quality, sustainability and traceability in the frozen tuna supply chain.