Growing concern over the hazardous effect of radionuclides on the environment is driving research on mitigation and deposition strategies for radioactive waste management. Currently, there are many techniques used for radionuclides separation from the environment such as ion exchange, solvent extraction, chemical precipitation and adsorption. Adsorbents are the leading area of research and many useful materials are being discovered in this category of radionuclide ion separation. The adsorption technologies lack the ability of selective removal of metal ions from solution. This drawback is eliminated by the use of ion-imprinted polymers, these materials having targeted binding sites for specific ions in the media. In this review article, we present recently published literature about the use of ion-imprinted polymers for the adsorption of 10 important hazardous radionuclides—U, Th, Cs, Sr, Ce, Tc, La, Cr, Ni, Co—found in the nuclear fuel cycle.
The study investigated the adsorption behaviour of different activated carbon samples for pertechnetate under diverse conditions. Characterizations of A-CF-F and A-CF-Z samples were done using BET, FTIR, XRD, XRF and SEM–EDX methods. In batch experiments, maximum adsorption occured at pH 2, with a swift process and an optimal phase mixing time determined as 1 h for all of the samples. Analyzing experimental data using Langmuir and Freundlich adsorption models revealed coefficients of determination R2 exceeding 90%. The Freundlich isotherm was found to be more suitable for describing the adsorption process.
MXenes are a family of 2D materials, gaining popularity in various fields of life due to their potential applications. Toxicology study on MXene related to water systems with algae has not yet been conducted. Stress response of S. quadricauda, a reliable bioindicator for freshwater bodies in terms of changes in algal growth, photosynthetic pigments, protein thiol group, and morphology were monitored by varying MXene concentrations (0.0001–10 mg/l). The results revealed a relatively low toxicity on the algal specific growth rate (SGR) of up to 0.1 mg/l MXene, but at higher concentrations, the SGR observed was significantly higher. It is proposed that the reason for this anomaly is that MXene, like other 2D nanomaterials, tends to form agglomerates with algae in the media confirmed by microscopic images demonstrating agglomeration of coenobium. Changes in the protein thiol groups were stable, indicating moderately higher oxidative stress, but the decrease in photosynthetic pigment production was significant even at the lowest applied MXene (0.001 mg/l). The correlation matrix showed an insignificant MXene toxicity. Upon exposure to even the lowest MXene concentration 0.0001 mg/l, increase in cell size and flagella shortening was noted. Higher concentrations resulted in cell agglomeration, shading effect, cell damage, change in coenobium structure, and even cell death. It is presumed that this agglomeration was the main reason for MXene toxicity, inhibiting light and nutrients, decreasing the growth and pigments, especially at higher concentrations. As algae and MXene are potential candidates for water bioremediation, making this toxicity assessment more relevant and needed.
The efficiency of and removal from aqueous solution is vital to mitigate ecological concerns over spreading these radionuclides in the environment. The present work focused on the use of Turkish perlite for the sorptive removal of and from aqueous solution by the radioindicator method. Perlite was characterized by XRF, XRD, FTIR, SEM–EDX, and BET analyses. The maximum percentage removals of 88.2% and 78.7% were obtained for and at pH 6 and pH 9, respectively. For both ions, the sorption equilibrium was attained relatively rapidly. Experimental kinetic data were well described with pseudo-second-order and intraparticle diffusion models. The uptake of both ions increased with the increase in metal concentration (1 × 10−5 to 5 × 10−2 mol/L) in solution. The maximum uptake capacities of and were found to be 1.96 and 2.11 mmol/g, respectively. The effect of competing ions decreased in the order of for sorption, whereas for sorption, the order was determined as . Selectivity studies pointed out that sorption of onto perlite is preferable to . Therefore, Turkish perlite is a promising, cost-effective, and efficient natural material for the removal of and from relatively diluted aqueous solution.