A monolithic composite MEMS sensor with sandwich structure is designed, simulated, fabricated and characterized. It consists of a rectangular diaphragm piezoresistive pressure sensor and a double-cantilever-mass piezoresistive accelerometer. The professional MEMS software, Intellisuite 8.5, is used to simulate the performances of the composite sensor. The composite sensor is fabricated on a (100)—silicon wafer by using MEMS bulk-micromachining and anodic bonding technology. One-step wet anisotropic etching process on the backside of the wafer can form the main backside shape of the composite sensor including the mass of accelerometer and the pressure sensing diaphragm. The glass-silicon-glass sandwich structure is formed with α-Si (amorphous silicon)-glass anodic bonding on the top surface of the wafer and Si-glass anodic bonding at the bottom. The fabricated composite sensor is measured, resulting in 33.0 μV/V kPa sensitivity for the 450 kPa-ranged pressure sensor, as well as, 11.2 μV/V g sensitivity for the 125 g-ranged accelerometer. The die size of the composite sensor chip is 2.5 mm × 2.5 mm × 1.4 mm. The measured results show that the composite sensor is appropriate for the application fields such as automobile, aerospace and environment monitoring.
The motion state of a droplet on an inclined, hydrophilic rough surface in gravity, pinned or sliding, is governed by the balance between the driving and the pinned forces. It can be judged by the droplet’s shape on the inclined hydrophilic rough surface and the droplet’s contact angle hysteresis. In this paper, we used the minimum energy theory, the minimum energy dissipation theory, and the nonlinear numerical optimization algorithm to establish Models 1–3 to calculate out the advancing/receding contact angles (/), the initial front/rear contact angles (/) and the dynamic front/rear contact angles (/) for a droplet on a rough surface. Also, we predicted the motion state of the droplet on an inclined hydrophilic rough surface in gravity by comparing () and () with (). Experiments were done to verify the predictions. They showed that the predictions were in good agreement with the experimental results. These models are promising as novel design approaches of hydrophilic functional rough surfaces, which are frequently applied to manipulate droplets in microfluidic chips.
In this study, a numerical model was developed to predict the wettable parameters of an axisymmetric large-volume droplet on a microstructured surface in gravity. We defined a droplet with the Bond number as a large-volume droplet. was calculated by using the equation where is the density of liquid, is the liquid-vapor interfacial tension, is the gravity acceleration and is the droplet volume. The volume of a large-volume water droplet was larger than 2.7 μL. By using the total energy minimization and the arc differential method of the Bashforth–Adams equation, we got the profile, the apparent contact angle and the contact circle diameter of an axisymmetric large-volume droplet in gravity on a microstructured horizontal plane and the external spherical surface. The predictions of our model have a less than 3% error rate when compared to experiments. Our model is much more accurate than previous ellipsoidal models. In addition, our model calculates much more quickly than previous models because of the use of the arc differential method of the Bashforth–Adams equation. It shows promise for use in the design and fabrication of microfluidic devices.