The complexity of the waste stream of spent lithium-ion batteries poses numerous challenges on the recycling industry. Pyrometallurgical recycling processes have a lot of benefits but are not able to recover lithium from the black matter since lithium is slagged due to its high oxygen affinity. The presented InduRed reactor concept might be a promising novel approach, since it does not have this disadvantage and is very flexible concerning the chemical composition of the input material. To prove its basic suitability for black matter processing, heating microscope experiments, thermogravimetric analysis and differential scanning calorimetry have been conducted to characterize the behavior of nickel rich cathode materials (LiNi_0.8Co_0.15Al_0.05O₂ and LiNi_0.33Mn_0.33Co_0.33O₂) as well as black matter from a pretreatment process under reducing conditions. Another experimental series in a lab scale InduRed reactor was further used to investigate achievable transfer coefficients for the metals of interest. The promising results show technically feasible reaction temperatures of 800 ${}^{\circ }$C to 1000 ${}^{\circ }$C and high recovery potentials for nickel, cobalt and manganese. Furthermore, the slagging of lithium was largely prevented and a lithium removal rate of up to 90% of its initial mass was achieved.

The bottleneck of recycling chains for spent lithium-ion batteries (LIBs) is the recovery of valuable metals from the black matter that remains after dismantling and deactivation in pre‑treatment processes, which has to be treated in a subsequent step with pyrometallurgical and/or hydrometallurgical methods. In the course of this paper, investigations in a heating microscope were conducted to determine the high-temperature behavior of the cathode materials lithium cobalt oxide (LCO—chem., LiCoO₂) and lithium iron phosphate (LFP—chem., LiFePO₄) from LIB with carbon addition. For the purpose of continuous process development of a novel pyrometallurgical recycling process and adaptation of this to the requirements of the LIB material, two different reactor designs were examined. When treating LCO in an Al₂O₃ crucible, lithium could be removed at a rate of 76% via the gas stream, which is directly and purely available for further processing. In contrast, a removal rate of lithium of up to 97% was achieved in an MgO crucible. In addition, the basic capability of the concept for the treatment of LFP was investigated whereby a phosphorus removal rate of 64% with a simultaneous lithium removal rate of 68% was observed.

With an ever-growing demand for critical raw materials for the production of lithium-ion batteries and a price increase of respective commodities, an ever louder call from the industry for efficient recycling technologies can be noticed. So far, state-of-the-art industry-scaled pyrometallurgical recycling technologies all suffer from the same bottleneck of lithium slagging. At the Chair of Thermal Processing Technology at Montanuniversitaet Leoben, a novel reactor was developed to recover lithium and phosphorus via the gas phase in a pyrometallurgical process. Critical elements such as Li, Ni, Co, and Mn of the commercially used cathode materials LCO (LiCoO₂), LFP (LiFePO₄), NCA (LiNi_0.8Co_0.15Al_0.05O₂), and NMC622 (LiNi_0.6Mn_0.2Co_0.2) were analyzed in a batch version of the so-called InduRed reactor concept. The analyses underline that the reactor concept is highly suitable for an efficient recovery for the metals Ni and Co and that slagging of Li can not only be largely prohibited, but the elements lithium and phosphorous can even be recovered from the gas phase. Plant engineering issues were also considered for further development toward a continuous process. The MgO crucible used shows significant diffusion of various elements from the battery material, which is why the choice of crucible material still requires in-depth research.

Meeting the increasing demand for energy storage based on lithium-ion batteries (LIB) is not only a question of resource availability but also an issue of resource conservation and efficient recycling management. In this respect, sustainable recycling concepts play a central role in mindful interactions with valuable materials. Based on this approach, a process interconnection of hydromechanical preparation, flotation, and pyrometallurgical treatment was investigated. The hydromechanical preparation showed promising results in achieving highly pure mixtures of LIB-active material. It was found that a pre-opening step could achieve an even better separation of impurities for downstream processes such as Cu and Al to avoid excessive particle size reduction. According to an optimized mixing stage during flotation, the C amount was reduced from 33 wt.% to 19.23 wt.%. A Li-free metal alloy was obtained through the subsequent pyrometallurgical treatment, and evidence for Li removal via the gas phase was provided. Furthermore, heating microscope trials confirmed the results of the process interconnection and showed that further optimization steps for the pre-treatment are necessary for favorable product quality. Therefore, a high-stratification plot was created, which allows a quick future statement about the suitability of the input material for use in the process.

Within the e-mobility sector, which represents a major driver of the development of the overall lithium-ion battery market, batteries with nickel-manganese-cobalt (NMC) cathode chemistries are currently gaining ground. This work is specifically dedicated to this NMC battery type and investigates achievable recovery rates of the valuable materials contained when applying an unconventional, pyrometallurgical reactor concept. For this purpose, the currently most prevalent NMC modifications (5-3-2, 6-2-2, and 8-1-1) with carbon addition were analyzed using thermogravimetric analysis and differential scanning calorimetry, and treated in a lab-scale application of the mentioned reactor principle. It was shown that the reactor concept achieves high recovery rates for nickel, cobalt, and manganese of well above 80%. For lithium, which is usually oxidized and slagged, the transfer coefficient into the slag phase was less than 10% in every experimental trial. Instead, it was possible to remove the vast amount of it via a gas phase, which could potentially open up new paths regarding metal recovery from spent lithium-ion batteries.

RecoDust is believed to be an efficient way of processing steel mill dusts to produce reusable secondary raw material resources. The rising costs of the steel production process and the increasing public attention towards environmental protection have caused steel plants worldwide to focus on emission-reduction processes and circular economy. As a reusable secondary raw material resource, the steel mill dust contains a high amount of iron and zinc. Nowadays, most of the steel mill dusts are processed under the Waelz-Process. However, this process is limited or impossible without additional dust treatment and can only be operated economically with zinc contents over 20 wt%. In the future, RecoDust in combination with dry slag granulation will become an efficient technique for processing lower zinc-containing materials of a steel mill. A challenging area in the field of RecoDust is the melting/reduction phase to separate volatile components and the slag treatment. A previous study was limited to the recovery of zinc. This paper compares the energy consumptions of the primary metal production to the recycling and of the RecoDust process to the Waelz-Process and outlines a new approach to RecoDust slag treatment.