In the process of injection molding, a certain percentage of recycled material is usually used in order to save costs. The material properties of recycled materials can change significantly compared with raw materials, and the quality of their molded products is more difficult to control. Therefore, it is crucial to propose a method that can effectively maintain the yield of the recycled material products. In addition, the variation of clamping force during the injection molding process can be determined by measuring the tie-bar elongation of the injection molding machine. Therefore, this study proposes a real-time product quality monitoring system based on the variation of clamping force during the injection molding process for the injection molding of recycled materials for plastic bottle caps. The variation of clamping force reflects the variation of cavity pressure during the injection molding process and further maps the variation of injection parameters during the injection molding process. Therefore, this study evaluates the reliability of the proposed method for three different injection parameters (residual position, metering end point and metering time). Experiments have shown that there is a strong correlation between the quality (geometric properties) and weight of the product under different molding parameters. Moreover, the three main injection parameters have a strong influence on the weight and quality of the plastic caps. The variation of the clamping force is also highly correlated with the weight of the plastic bottle cap. This demonstrates the feasibility of applying the variation of clamping force to monitor the quality of injection molded products. Furthermore, by integrating the clamping force variation index with the calibration model of the corresponding injection parameters, it is possible to control the weight of the plastic cap within the acceptable range of the product in successive production runs.
The purpose of this study is to clarify the influence of changes in glass fiber properties on warpage prediction, and to demonstrate the importance of accurate material property data in the numerical simulation of injection molding. In addition, this study proposes an optimization method based on the reverse warping agent model, in which the thermal conductivity of the plastic material is reduced, and the solidified layer on the surface of the mold is reduced and transferred from the molding material to the mold wall. This means that by the end of the cooling phase, the shrinkage of the molten zone within the component will continue, resulting in warpage. Based on the optimal process parameters, the sensitivity of the warpage prediction to the relationship between the two most important material properties, the glass fiber and holding pressure time, was analyzed. The material property model constants used for numerical simulations can sometimes vary significantly due to inherent experimental measurement errors, the resolution of the test device, or the manner in which the curve fit is performed to determine the model constants. This model has been developed to intelligently determine the preferred processing parameters and to gradually correct the details of the molding conditions. Thus, the cavity is separated in the critical warpage region, and a new cavity geometry with a reverse warped profile is placed into the mold base slot. The results show that the hypothetical and reasonable variation of the glass fiber model constant and the holding pressure time relationship may significantly affect the magnitude of the warpage prediction of glass fiber products. The greatest differences were found as a result of the warping orientation of the glass fiber material.
One of the important values of Industry 4.0 is to integrate people’s needs into the manufacture of enhanced products, systems, and services to achieve greater levels of product customization. This paper presents a prediction method for predicting screw process parameters; taking crystalline and non-crystalline polymers as the molding material, when there is a lack of sufficient historical screw process data to establish a data-driven method, using various screws and polymer materials to predict tool life under different cutting conditions is a challenge. A screw life prediction method is proposed based on the mixed compound screw process parameters method using a dynamic iteration work. To meet the requirements of mass production, this work proposes the combined application of the automatic virtual metrology (AVM) system with the recognizable performance evaluation (RPE) program. The method predicts the injection of compound screws by extracting given cutting conditions and related process parameters characteristics from the senor data by converting sampling inspections with measurement delays from real-time and online routine inspections to automatically and quickly complete method creation production goals.
Based on the context of Industry 4.0 smart manufacturing and for the prediction of injection molding quality of automobile bumpers, this study proposes a deep learning network that combines artificial neural networks and recognizable performance evaluation methods to better achieve the prediction and control of product quality. A pressure sensor was used to monitor and collect real-time pressure data in the mold cavity of the bumper. The quality indicators reflecting the molding quality were selected, and the correlation between these indicators and the molding quality was evaluated using recognizable performance evaluation methods and Pearson’s correlation coefficient. The standard z-score was used to filter out the abnormal data in the experimental data, and the bumper critical length warpage was converted into different quality levels, and the bumper critical length warpage was defined as either “qualified” and “unqualified” in order to improve the prediction accuracy of the model. Through the experimental study of this research, the monitoring and control of bumper injection molding parameters was completed to control and improve the molding quality of the bumper.
The phenomenon of residual stress in optical lens injection molding affects the quality of optical devices, with the refractive errors that are caused by geometric errors being the most serious, followed by the reduced accuracy and function of optical components; it is very important to ensure that the lens geometry remains intact and that the refractive index is reduced. This paper uses a photoelastic stress compensation method for measurement verification along with fuzzy theory to reorganize a set of processes that can be used to evaluate the residual stress of a product, whereby the use of corresponding theoretical formulas can effectively quantify and measure the residual stress of the product. A mold flow simulation is used to analyze the molded optical components and determine the feasibility of evaluating the quality of the lens. Through the measurement of the refractive stress value of the optical components, the molding quality of the lens can be improved, and its force distribution effects can be investigated. Geometric analysis and shear stress affect the performance of optical components, and these errors may also cause irreparable problems during secondary processing. Therefore, it is crucial to reduce the residual stress of optical components. When the stress distribution is uniform and the internal melting pressure is reasonably configured, the product’s shrinkage rate can be controlled; the method for determining the residual stress is the core theme of this research.