We propose a device concept for a hybrid nanocrystal/III-nitride based nano-LED. Our approach is based on the direct electro-optical pumping of nanocrystals (secondary excitation) by electrically driven InGaN/GaN nano-LEDs as the primary excitation source. To this end, a universal hybrid optoelectronic platform was developed for a large range of optically active nano- and mesoscopic structures. The advantage of the approach is that the emission of the nanocrystals can be electrically induced without the need of contacting them. The proof of principal was demonstrated for the electro-optical pumping of CdSe nanocrystals. The nano-LEDs with a diameter of 100 nm exhibit a very low current of ∼8 nA at 5 V bias which is several orders of magnitude smaller than for those conventionally used. The leakage currents in the device layout were typically in the range of 8 pA to 20 pA/cm2 at 5 V bias. The photon-photon down conversion efficiency was determined to be 27%. Microphotoluminescence and microelectroluminescence characterization demonstrate the potential for future optoelectronics and highly secure “green” information technology applications.
1 January 2010 in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
The paper gives a review of continuous wave optical devices called THz photomixers used for excitation and detection of the terahertz radiation. Possible structures of the terahertz photomixers are classified and described.
6 February 2016 in Journal of the European Optical Society-Rapid Publications
This paper reviews machine-learning methods that are nowadays the most frequently used for the supervised classification of spectral signals in laser-induced breakdown spectroscopy (LIBS). We analyze and compare various statistical classification methods, such as linear discriminant analysis (LDA), quadratic discriminant analysis (QDA), partial least-squares discriminant analysis (PLS-DA), soft independent modeling of class analogy (SIMCA), support vector machine (SVM), naive Bayes method, probabilistic neural networks (PNN), and K-nearest neighbor (KNN) method. The theoretical considerations are supported with experiments conducted for real soft-solder-alloy spectra obtained using LIBS. We consider two decision problems: binary and multiclass classification. The former is used to distinguish overheated soft solders from their normal versions. The latter aims to assign a testing sample to a given group of materials. The measurements are obtained for several laser-energy values, projection masks, and numbers of laser shots. Using cross-validation, we evaluate the above classification methods in terms of their usefulness in solving both classification problems.
In this study, we presented the concept and implementation of a fully functional system for the recognition of bi-heterocyclic compounds. We have conducted research into the application of machine learning methods to correctly recognize compounds based on THz spectra, and we have described the process of selecting optimal parameters for the kernel support vector machine (KSVM) with an additional ‘unknown’ class. The chemical compounds used in the study contain a target molecule, used in pharmacy to combat inflammatory states formed in living organisms. Ready-made medical products with similar properties are commonly referred to as non-steroidal anti-inflammatory drugs (NSAIDs) once authorised on the pharmaceutical market. It was crucial to clearly determine whether the tested sample is a chemical compound known to researchers or is a completely new structure which should be additionally tested using other spectrometric methods. Our approach allows us to achieve 100% accuracy of the classification of the tested chemical compounds in the time of several milliseconds counted for 30 samples of the test set. It fits perfectly into the concept of rapid recognition of bi-heterocyclic compounds without the need to analyse the percentage composition of compound components, assuming that the sample is classified in a known group. The method allows us to minimize testing costs and significant reduction of the time of analysis.
Background: The Attenuated Total Reflection (ATR) technique of spectroscopy in combination using the terahertz technique is being investigated to find rotatable bonds, which are considered as one of the rules of thumb given by Veber et al.. Results: Histidine, as one of the most studied pharmacological preparations, is used in an experiment to test our research. Three rotatable bonds have been found and thus the results published in pharmaceutical data guides have been confirmed. Conclusion: The results are obtained in a terahertz spectrometer equipped with a Dove prism, where an ATR technique is applied. The samples in two forms, polycrystalline and as a solution in alcohol, are used to check the methodology. Histidine molecules, dissolved in alcohol and thus freed from intermolecular bonds, exposed the rotations around the three bonds. Thus, the validity of the ATR-THz research methodology used in the search for rotating bonds in drug candidates molecules is confirmed. The goal of the method presented in the paper is to support pharmacological research, and pharmaceutical industry, as well.