This work builds a three-dimensional (3D) simulation model and studies the electrokinetic velocity of a microparticle adsorbed at a horizontal oil/water interface in an infinite domain. The effects of the interface zeta potentials, the electric field, the oil dynamic viscosity, and the contact angle between the particle and the oil/water interface are investigated in detail. The results show that in an infinite oil/water interface system, both the negatively charged mobile oil/water interface and the negatively charged particle adsorbed to it move toward the positive electrode of the DC electric field, and the particle velocity increases along with the contact angle, the electric field strength, and the absolute values of negative zeta potential of both the particle and the oil/water interface. When the oil/water interface is positively charged with a relatively small zeta potential, the negatively charged microparticle also moves in the opposite direction of the electric field. The larger the oil dynamic viscosity, the smaller the electrokinetic velocity of the microparticle at the interface. Additionally, the numerical simulation results are compared with the reported experiment results under the same conditions, and they have good agreement.
This article proposes a micromixer based on the vortices generated in a T-type microchannel with nonuniform but same polarity zeta potentials under a direct current (DC) electric field. The downstream section (modified section) of the outlet channel was designed with a smaller zeta potential than others (unmodified section). When a DC electric field is applied in the microchannel, the electrokinetic vortices will form under certain conditions and hence mix the solution. The numerical results show that the mixing performance is better when the channel width and the zeta potential ratio of the modified section to the unmodified section are smaller. Besides, the electrokinetic vortices formed in the microchannel are stronger under a larger length ratio of the modified section to the unmodified section of the outlet channel, and correspondingly, the mixing performance is better. The micromixer presented in the paper is quite simple in structure and has good potential applications in microfluidic devices.
Micromixers play a crucial role as essential components in microfluidic analysis systems. This paper introduces a novel micromixer designed by harnessing electrokinetic vortices arising on the surface of a Janus droplet within a microchannel. The Janus droplet is characterized by different polarities of charges on its two sides (upstream part and downstream part). In the presence of a direct current electric field, the droplet’s surface generates electroosmotic flows in opposite directions, resulting in the formation of vortices and facilitating solution mixing. Results from numerical simulations suggest that a better mixing performance of the micromixer is associated with both a higher absolute value of the zeta potential ratio between the downstream and upstream surfaces of the Janus droplet and a larger downstream surface area. Additionally, this study reveals that microchannel dimensions significantly influence the performance of the micromixer. Smaller microchannel widths and heights correspond to a larger mixing index for the micromixer. The micromixer presented in this study features a simple structure, easy fabrication, and holds promising application potential.