•OH radicals are the main cause of chemical degradation of Nafion membranes in fuel cell operation. Although the cerium ion (Ce3+/4+, Ce) is reported as an effective •OH radical quencher, its membrane application has critical limitations associated with the reduction of membrane proton conductivity and its leaking. In this study, the Ce-grafted graphitic carbon nitrides (g-C3N4) (CNCe) nano-particles are synthesized and embedded in Nafion membranes to prolong the •OH radical scavenging effect. The synthesis of CNCe nano-particles is evaluated by X-ray diffraction, energy dispersive X-ray analysis, and transmission electron microscopy. Compared with the pristine and Ce-blended Nafion membranes, the CNCe imbedded ones show tremendous improvement in long-term anti-oxidation stability. While the fluoride emission rates of Nafion are 0.0062 mg·cm−2·h−1 at the anode and 0.0034 mg·cm−2·h−1 at the cathode, those of Nafion/CNCe membranes are 0.0037 mg·cm−2·h−1 at the anode and 0.0023 mg·cm−2·h−1 at the cathode. The single cell test for Nafion/CNCe membranes at 80 °C and 50% relative humidity illustrates much better durability than those for Nafion and Nafion/Ce, indicating its superior scavenging effect on •OH radicals.
Investigation of the collaborative effect of cerium particles embedded in graphene oxide to enhance the chemical stability of a proton exchange membrane fuel cell (PEMFC) has been carried out. Synthesis of composite membranes (Nafion-GO/Ce-x) with Nafion solution as a polymer is synthesized by a solution casting method where (x = concentration of composite). The developed hybrid material was characterized by FT-IR and X-ray diffraction (XRD) for its phase identification while the chemical structure was characterized by XPS analysis. The enhancement in the chemical stability of the incorporated hybrid material is characterized by Fenton’s test showing a radical scavenging effect. It was found that the residual weight for Nafion 212 was 92.50% after 24 h and it was 94.32% for Nafion-GO/Ce-2 and 96.49% for Nafion-GO/Ce-4, proving the suitability of composite membranes for fuel cell applications.
A series of hybrid proton exchange membranes were synthesized via in situ polymerization of poly (2-acrylamido-2-methyl-1-propanesulfonic acid) PMPS with sulfonated poly (1,4-phenylene ether-ether-sulfone) (SPEES). The insertion of poly (2-acrylamido-2-methyl-1-propanesulfonic acid) PMPS, between the rigid skeleton of SPEES plays a reinforcing role to enhance the ionic conductivity. The synthesized polymer was chemically characterized by fourier-transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance 1H NMR spectroscopy to demonstrate the successful grafting of PMPS with the pendent polymer chain of SPEES. A variety of physicochemical properties were also investigated such as ion exchange capacity (IEC), proton conductivity, water uptake and swelling ratio to characterize the suitability of the formed polymer for various electrochemical applications. SP-PMPS-03, having the highest concentration of all PMPS, shows excellent proton conductivity of 0.089 S cm−1 at 80 °C which is much higher than SPEES which is ~0.049 S cm−1. Optimum water uptake and swelling ratio with high conductivity is mainly attributed to a less ordered arrangement polymer chain with high density of the functional group to facilitate ionic transport. The residual weight was 93.35, 92.44 and 89.56%, for SP-PMPS-01, 02 and 03, respectively, in tests with Fenton’s reagent after 24 h. In support of all above properties a good chemical and thermal stability was also achieved by SP-PMPS-03, owing to the durability for electrochemical application.
A successful approach towards enhancement in ion cluster size of sulfonated poly (arylene ether sulfone) (SPAES)-based membranes has been successfully carried out by encapsulating basic pendent branches as side groups. Modified SPAES was synthesized by condensation polymerization followed by bromination with N-bromosuccinamide (NBS) and sulfonation by ring opening reaction. Various molar ratios of branched polyethyleneimine (PEI) were added to the SPAES and the developed polymer was designated as SPAES-x-PEI-y, where x denoted the number of sulfonating acid group per polymer chain and y represents the amount of PEI concentration. Polymer synthesis was characterized by 1H-NMR (Nuclear magnetic resonance) and FT-IR (Fourier-transform infrared spectroscopy) analysis. A cumulative trend involving enhanced proton conductivity of the membranes with an increase in the molar ratio of PEI has been observed, clearly demonstrating the formation of ionic clusters. SPAES-140-PEI-3 membranes show improved proton conductivity of 0.12 Scm−1 at 80 °C. Excellent chemical stability was demonstrated by the polymer with Fenton’s test at 80 °C for 24 h without significant loss in proton conductivity, owing to the suitability of the synthesized hybrid membrane for electrochemical application. Moreover, a single cell degradation test was conducted at 80 °C showing a power density at a 140 mWcm−2 value, proving the stable nature of synthesized membranes for proton exchange membrane fuel cell application.
Alkaline stable anion exchange membranes based on the cross-linked poly(arylene ether sulfone) grafted with dual quaternary piperidine (XPAES-DP) units were synthesized. The chemical structure of the synthesized PAES-DP was validated using 1H-NMR and FT-IR spectroscopy. The physicochemical, thermal, and mechanical properties of XPAES-DP membranes were compared with those of two linear PAES based membranes grafted with single piperidine (PAES-P) unit and conventional trimethyl amine (PAES-TM). XPAES-DP membrane showed the ionic conductivity of 0.021 S cm−1 at 40 °C which was much higher than that of PAES-P and PAES-TM because of the possession of more quaternary ammonium groups in the cross-linked structure. This cross-linked structure of the XPAES-DP membrane resulted in a higher tensile strength of 18.11 MPa than that of PAES-P, 17.09 MPa. In addition, as the XPAES-DP membrane shows consistency in the ionic conductivity even after 96 h in 3 M KOH solution with a minor change, its chemical stability was assured for the application of anion exchange membrane fuel cell. The single-cell assembled with XPAES-DP membrane displayed a power density of 109 mWcm−2 at 80 °C under 100% relative humidity.
Reverse electrodialysis (RED) generates power directly by transforming salinity gradient into electrical energy. The ion transport properties of the ion-exchange membranes need to be investigated deeply to improve the limiting efficiencies of the RED. The interaction between “counterions” and “ionic species” in the membrane requires a fundamental understanding of the phase separation process. Here, we report on sulfonated poly(vinylidene fluoride-co-hexafluoropropylene)/graphitic carbon nitride nanocomposites for RED application. We demonstrate that the rearrangement of the hydrophilic and hydrophobic domains in the semicrystalline polymer at a nanoscale level improves ion conduction. The rearrangement of the ionic species in polymer and “the functionalized nanosheet with ionic species” enhances the proton conduction in the hybrid membrane without a change in the structural integrity of the membrane. A detailed discussion has been provided on the membrane nanostructure, chemical configuration, structural robustness, surface morphology, and ion transport properties of the prepared hybrid membrane. Furthermore, the RED device was fabricated by combining synthesized cation exchange membrane with commercially available anion exchange membrane, NEOSEPTA, and a maximum power density of 0.2 W m−2 was successfully achieved under varying flow rates at the ambient condition.