In recent years, wind turbines have shown a maximization trend. However, most of the wind turbine blades operate in areas with a relatively poor natural environment. The stability, safety, and reliability of blade operation are facing many challenges. Therefore, it is of great significance to monitor the structural health of wind turbine blades to avoid the failure of wind turbine outages and reduce maintenance costs. This paper reviews the commonly observed types of damage and damage detection methods of wind turbine blades. First of all, a comprehensive summary of the common embryonic damage, leading edge erosion, micro-cracking, fiber defects, and coating defects damage. Secondly, three fault diagnosis methods of wind turbine blades, including nondestructive testing (NDT), supervisory control and data acquisition (SCADA), and vibration signal-based fault diagnosis, are introduced. The working principles, advantages, disadvantages, and development status of nondestructive testing methods are analyzed and summarized. Finally, the future development trend of wind turbine blade detection and diagnosis technology is discussed. This paper can guide the use of technical means in the actual detection of wind turbine blades. In addition, the research prospect of fault diagnosis technology can be understood.

Onshore wind turbines are primarily installed in high-altitude areas with good wind energy resources. However, in winter, the blades are easy to ice, which will seriously impact their aerodynamic performance, as well as the power and service life of the wind turbine. Therefore, it is of great practical significance to predict wind turbine blade icing in advance and take measures to eliminate the adverse effects of icing. Along these lines, three approaches to supervisory control and data acquisition (SCADA) data feature selection were summarized in this work. The problems of imbalance between positive and negative sample datasets, the underutilization of SCADA data time series information, the scarcity of high-quality labeled data, and weak model generalization capabilities faced by data-driven approaches in wind turbine blade icing detection, were reviewed. Finally, some future trends in data-driven approaches were discussed. Our work provides guidance for the use of technical means in the actual detection of wind turbine blades. In addition, it also gives some insights to the further research of fault diagnosis technology.

Floating offshore wind turbines (FOWT) have attracted more and more attention in recent years. However, environmental loads on FOWTs have higher complexity than those on the traditional onshore or fixed-bottom offshore wind turbines. In addition to aerodynamic loads on turbine blades, hydrodynamic loads also act on the support platform. A review on the aerodynamic analysis of blades, hydrodynamic simulation of the supporting platform, and coupled aero- and hydro-dynamic study on FOWTs, is presented in this paper. At present, the primary coupling method is based on the combination of BEM theory and potential flow theory, which can simulate the performance of the FOWT system under normal operating conditions but has certain limitations in solving the complex problem of coupled FOWTs. The more accurate and reliable CFD method used in the research of coupling problems is still in its infancy. In the future, multidisciplinary theories should be used sufficiently to research the coupled dynamics of hydrodynamics and aerodynamics from a global perspective, which is significant for the design and large-scale utilization of FOWT.

With the urgent demand for net-zero emissions, renewable energy is taking the lead and wind power is becoming increasingly important. Among the most promising sources, offshore wind energy located in deep water has gained significant attention. This review focuses on the experimental methods, simulation approaches, and wake characteristics of floating offshore wind turbines (FOWTs). The hydrodynamics and aerodynamics of FOWTs are not isolated and they interact with each other. Under the environmental load and mooring force, the floating platform has six degrees of freedom motions, which bring the changes in the relative wind speed to the turbine rotor, and furthermore, to the turbine aerodynamics. Then, the platform’s movements lead to a complex FOWT wake evolution, including wake recovery acceleration, velocity deficit fluctuations, wake deformation and wake meandering. In scale FOWT tests, it is challenging to simultaneously satisfy Reynolds number and Froude number similarity, resulting in gaps between scale model experiments and field measurements. Recently, progress has been made in scale model experiments; furthermore, a “Hardware in the loop” technique has been developed as an effective solution to the above contradiction. In numerical simulations, the coupling of hydrodynamics and aerodynamics is the concern and a typical numerical simulation of multi-body and multi-physical coupling is reviewed in this paper. Furthermore, recent advancements have been made in the analysis of wake characteristics, such as the application of instability theory and modal decomposition techniques in the study of FOWT wake evolution. These studies have revealed the formation of vortex rings and leapfrogging behavior in adjacent helical vortices, which deepens the understanding of the FOWT wake. Overall, this paper provides a comprehensive review of recent research on FOWT wake dynamics.

In recent years, leading-edge tubercles have gained significant attention as an innovative biomimetic flow control technique. This paper explores their impact on the aerodynamic performance and flow patterns of an airfoil through wind tunnel experiments, utilizing force measurements and tuft visualization at Reynolds numbers between 2.7 × 10⁵ and 6.3 × 10⁵. The baseline airfoil exhibits a hysteresis loop near the stall angle, with sharp changes in lift coefficient during variations in the angle of attack (AOA). In contrast, the airfoil with leading-edge tubercles demonstrates a smoother stall process and enhanced post-stall performance, though its pre-stall performance is slightly reduced. The study identifies four distinct flow regimes on the modified airfoil, corresponding to different segments of the lift coefficient curve. As the AOA increases, the flow transitions through stages of full attachment, trailing-edge separation, and local leading-edge separation across some or all valley sections. Additionally, the study suggests that normalizing aerodynamic performance based on the valley section chord length is more effective, supporting the idea that leading-edge tubercles function like a series of delta wings in front of a straight-leading-edge wing. These insights provide valuable guidance for the design of blades with leading-edge tubercles in applications such as wind and tidal turbines.

The efficient, low-cost, and large-scale development and utilization of offshore wind energy resources is an inevitable trend for future growth. With the continuous increase in the scale of wind turbines and their expansion into deep-sea locations, there is an urgent need to develop ultra-long, flexible blades suitable for future high-capacity turbines. Existing reviews in the field of blade design lack a simultaneous focus on the two core elements of blade performance calculation and design methods, as well as a detailed evaluation of specific methods. Therefore, this paper reviews the performance calculation and design methodologies of horizontal-axis wind turbine blades from three aspects: aerodynamic design, structural design, and coupled aero-structural design. A critical introduction to various methods is provided, along with a key viewpoint centered around design philosophy: there is no global optimal solution; instead, the most suitable solution is chosen from the Pareto set according to the design philosophy. This review not only provides a concise and clear overview for researchers new to the field of blade design to quickly acquire key background knowledge but also offers valuable insights for experienced researchers through critical evaluations of various methods and the presentation of core viewpoints. The paper also includes a refined review of extended areas such as aerodynamic add-ons and fatigue characteristics, which broadens the scope of the review to touch on multiple research areas and inspire further research. In future research, it is crucial to identify new key issues and challenges associated with increased blade length and flexibility, address the challenges faced in integrated aero-structural design, and develop platforms and tools that support multi-objective optimization design of blades, ensuring the safe, stable, and orderly development of wind turbines.