This letter presents the design and potential impact of the developed Research Oriented Underwater Glider for Hands-on Investigative Engineering (ROUGHIE). The ROUGHIE is an open-source, highly maneuverable, and low-cost vehicle that enables rapid development and testing of new hardware and software. ROUGHIE is an internally actuated glider capable of performing steady sawtooth glides in shallow water down to 3 m, tight turns with a minimum radius of 3 m, and a minimum endurance of 60 h. The novelty of this study is twofold: 1) a rail-based design to facilitate modularity and ease of assembly and 2) an effective internal rotary mass mechanism to increase maneuverability and perform tight turns. The ROUGHIE design strategically uses 3D printed plastic parts in low stress situations, which allows extreme design flexibility and enables tightly packed modules that can be easily customized.
9 January 2019 in IEEE Journal of Oceanic Engineering
Mobile robotics research and deployment is highly challenged by energy limitations, particularly in marine robotics applications. This challenge can be addressed by autonomous transfer and sharing of energy in addition to effective mission planning. Specifically, it is possible to overcome energy limitations in robotic missions using an optimization approach that can generate trajectories for both working robots and mobile chargers while adapting to environmental changes. Such a method must simultaneously optimize all trajectories in the robotic network to be able to maximize overall system efficiency. This letter presents a Genetic Algorithm based approach that is capable of solving this problem at a variety of scales, both in terms of the size of the mission area and the number of robots. The algorithm is capable of re-planning during operation, allowing for the mission to adapt to changing conditions and disturbances. The proposed approach has been validated in multiple simulation scenarios. Field experiments using an autonomous underwater vehicle and a surface vehicle verify feasibility of the generated trajectories. The simulation and experimental validation show that the approach efficiently generates feasible trajectories to minimize energy use when operating multi-robot networks.
8 April 2017 in Journal of Intelligent & Robotic Systems
This paper presents a novel roll mechanism and an efficient control strategy for internally actuated autonomous underwater vehicles (AUVs). The developed control algorithms are tested on Michigan Tech’s custom research glider, ROUGHIE (Research Oriented Underwater Glider for Hands-on Investigative Engineering), in a controlled environment. The ROUGHIE’s design parameters and operational constraints were driven by its requirement to be man portable, expandable, and maneuverable in shallow water. As an underwater glider, the ROUGHIE is underactuated with direct control of only depth, pitch, and roll. A switching control method is implemented on the ROUGHIE to improve its maneuverability, enabling smooth transitions between different motion patterns. This approach uses multiple feedforward-feedback controllers. Different aspects of the roll mechanism and the effectiveness of the controller on turning motion are discussed based on experimental results. The results illustrate that the ROUGHIE is capable of achieving tight turns with a radius of 2.4 meters in less than 3 meters of water, or one order of magnitude improvement on existing internally actuated platforms. The developed roll mechanism is not specific to underwater gliders and is applicable to all AUVs, especially at lower speeds and in shallower water when external rudder is less effective in maneuvering the vehicle.
This paper presents results from the integration of a compact quantum magnetometer system and an agile underwater glider for magnetic survey. A highly maneuverable underwater glider, ROUGHIE, was customized to carry an increased payload and reduce the vehicle’s magnetic signature. A sensor suite composed of a vector and scalar magnetometer was mounted in an external boom at the rear of the vehicle. The combined system was deployed in a constrained pool environment to detect seeded magnetic targets and create a magnetic map of the test area. Presented is a systematic magnetic disturbance reduction process, test procedure for anomaly mapping, and results from constrained operation featuring underwater motion capture system for ground truth localization. Validation in the noisy and constrained pool environment creates a trajectory towards affordable littoral magnetic anomaly mapping infrastructure. Such a marine sensor technology will be capable of extended operation in challenging areas while providing high-resolution, timely magnetic data to operators for automated detection and classification of marine objects.
This paper presents a backseat controller suitable for Autonomous Underwater Vehicles (AUVs) which promotes quick development turn-around of novel control methods, especially for missions which require onboard re-planning. This backseat controller communicates low-level control instructions to a vehicle-specific frontseat controller. Small, power efficient components comprise the backseat controller hardware, especially a Raspberry Pi computer. The backseat controller runs Robot Operating System (ROS), a middleware that facilitates implementation of novel control algorithms and use of OpenCV, an extensive collection of computer vision libraries. ROS enables the underwater community to leverage development efforts in the ground and aerial domains to accelerate progress. The backseat controller has been mated to General Dynamics Bluefin SandShark AUV. The platform has been validated in a controlled environment and is now being deployed in Lake Superior, MI, USA.