Distributed precision jamming (DPJ) is an efficient way to control the combined power spectrum (CPS) of both target and friendly devices in electronic warfare. However, the existing methods neglect the design of worst-case CPS performance, and a great challenge is posed in determining an appropriate Pareto parameter to protect the friendly devices in practice. To address these issues, this paper investigates the maximin design of wideband constant modulus (CM) waveform for DPJ. Specifically, a novel optimization problem is established by maximizing the minimum CPS of the target equipment, and the maximum CPS of friendly devices is controlled under a given threshold in the constraint. The resultant problem is nonconvex and nonsmooth, together with CM and numerous quadratic constraints. Two algorithms, which can start from an infeasible initial point, are proposed to tackle the problem approximated by the l p -norm. The first algorithm resorts to the alternating direction method of multipliers (ADMM) framework, and each subproblem is obtained with a closed-form solution. The second algorithm merges the penalty distance (PD) method and manifold optimization. The crux of this approach is to obtain the closed-form Euclidean PD term via the Karush-Kuhn-Tucker conditions and leverage the Riemannian conjugate gradient (RCG) framework, and we name this algorithm PD-RCG. Numerical examples demonstrate the effectiveness of our proposed algorithms. Comparatively speaking, the ADMM-based algorithm has better performance in protecting the friendly devices, while the PD-RCG algorithm performs better on the computational efficiency and the worst-case CPS of the target equipment.
Considering the imperfect communication channel state information (CSI), we investigated a robust joint design of transmit waveform and receive filter for the dual-functional radar-communication (DFRC) system using a multi-input-multi-output (MIMO) platform. In this study, we take the output signal-to-interference-plus-noise ratio (SINR) of the radar as the cost function, while formulating communication constructive interference (CI) constraints under imperfect estimation of communication CSI. We also imposed a constant modulus constraint to preserve the unimodular property of the transmitted waveform. To solve the complicated non-convex problem, we developed two efficient algorithms in both Euclidean and Riemannian spaces. The first algorithm used alternative direction methods of multipliers (ADMM) to break down the optimization problem into two solvable sub-problems, which were then solved using the majorization-minimization (MM) method and geometrical structure. The second algorithm converted the communication CI constraints into a distance penalty term, transformed the original problem into Riemannian space, and solved it efficiently using the Riemannian complex circle manifold conjugate gradient method. Finally, extensive simulation results demonstrate the effectiveness and superiority of both proposed algorithms.
With the advancement of radar technology toward multifunctionality and cognitive capabilities, traditional radar countermeasures are no longer sufficient to meet the demands of countering the advanced multifunctional radar (MFR) systems. Rapid and accurate generation of the optimal jamming strategy is one of the key technologies for efficiently completing radar countermeasures. To enhance the efficiency and accuracy of jamming policy generation, an efficient jamming policy generation method based on multi-timescale ensemble Q-learning (MTEQL) is proposed in this paper. First, the task of generating jamming strategies is framed as a Markov decision process (MDP) by constructing a countermeasure scenario between the jammer and radar, while analyzing the principle radar operation mode transitions. Then, multiple structure-dependent Markov environments are created based on the real-world adversarial interactions between jammers and radars. Q-learning algorithms are executed concurrently in these environments, and their results are merged through an adaptive weighting mechanism that utilizes the Jensen–Shannon divergence (JSD). Ultimately, a low-complexity and near-optimal jamming policy is derived. Simulation results indicate that the proposed method has superior jamming policy generation performance compared with the Q-learning algorithm, in terms of the short jamming decision-making time and low average strategy error rate.
Focussed energy delivery (FED), which transmits energy to a specific area by ultrasparse arrays, is the core technique of precision electronic warfare (PREW). However, array sparsity results in severe grating lobes in practice, which greatly increase the risks of an interference system being attacked and unexpected jamming occurring in other devices. Here, two methods are presented which are aimed at suppressing grating lobes when implementing FED in the application of PREW to avoid the problems mentioned. Regarding the first method, a new metric based on the -norm is proposed to measure the maximum grating lobe and introduce the metric to the standard FED model. A multiobjective optimisation problem (MOP) is established and solved by the alternating direction penalty method (ADPM) framework. In the second method, the degrees of freedom of the transmitted signals are extended by equipping each platform with a group of linear uniform antennas. The corresponding MOP is established and block coordinate descent is employed to simplify the problem into two subproblems concerning the amplitude and phase components of the transmitted signals. Then, these two subproblems are solved using Taylor expansion and the ADPM framework. Simulation results are provided to demonstrate the advantages of the proposed methods over the state-of-the-art methods.
This letter presents a new method of focused energy delivery (FED) with low grating lobes for precision electronic warfare (PREW). The transmitted signal model is modified by equipping each platform with a linear uniform antenna array, enabling the same performance with lower power and providing a greater degree of freedom in the design of the transmitted signals than traditional methods. Moreover, the L ∞ ‐norm is considered as a regularization term in the model to simultaneously realize FED and alleviate the grating lobes. To solve the nonconvex NP‐hard multiobjective optimization problem (MOP), block coordinate descent (BCD) is employed to separate the problem into two subproblems with respect to the amplitude and phase components of the signals. Then, these two subproblems are solved using Taylor expansion (TE) and the alternating direction penalty method (ADPM), respectively. Simulation results demonstrate that the proposed method exhibits superior performance compared to previous methods.