Nicolas Abadia

Nicolas Abadia


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2018 in Optics Express
Verified
Journal Article
Open access
PDF file
NANicolas Abadia
Nicolas Abadia
MSMd Ghulam Saber
Md Ghulam Saber
FBFrank Bello
Frank Bello
ASAlireza Samani
Alireza Samani
EEEslam El-Fiky
Eslam El-Fiky
DPDavid V. Plant
David V. Plant
A CMOS-compatible plasmonic TE-pass polarizer capable of working in the O, E, S, C, L, and U bands is numerically analyzed. The device is based on an integrated hybrid plasmonic waveguide (HPW) with a segmented metal design. The segmented metal will avoid the propagation of the TM mode, confined in the slot of the HPW, while the TE fundamental mode will pass. The TE mode is not affected by the metal segmentation since it is confined in the core of the HPW. The concept of the segmented metal can be exploited in a plasmonic circuit with HPWs as the connecting waveguides between parts of the circuit and in a silicon photonics circuit with strip or slab waveguides connecting the different parts of the circuit. Using 3D FDTD simulations, it is shown that for a length of 5.5 μm the polarization extinction ratios are better than 20 dB and the insertion losses are less than 1.7 dB over all the optical communication bands.

9 May 2022 in Optics Express
Verified
Journal Article
Open access
JMJoe Mahoney
Joe Mahoney
MTMingchu Tang
Mingchu Tang
HLHuiyun Liu
Huiyun Liu
NANicolas Abadia
Nicolas Abadia
The quantum-confined Stark effect in InAs/In(Ga)As quantum dots (QDs) using non-intentionally doped and p-doped QD barriers was investigated to compare their performance for use in optical modulators. The measurements indicate that the doped QD barriers lead to a better figure of merit (FoM), defined as the ratio of the change in absorption Δα for a reverse bias voltage swing to the loss at 1 V α(1 V), FoM=Δα/α (1 V). The improved performance is due to the absence of the ground-state absorption peak and an additional component to the Stark shift. Measurements indicate that p-doping the QD barriers can lead to more than a 3x increase in FoM modulator performance between temperatures of −73 °C to 100 °C when compared with the stack with NID QD barriers.

12 February 2025 in Applied Optics
Verified
Journal Article
Closed access
JVJeffry Martínez Valdiviezo
Jeffry Martínez Valdiviezo
RPRoberto Peyton
Roberto Peyton
JRJuan Manuel Rodriguez
Juan Manuel Rodriguez
RSRaúl Della Salda
Raúl Della Salda
NANicolas Abadia
Nicolas Abadia
GTGustavo A. Torchia
Gustavo A. Torchia
This paper presents a brief roadmap to design and fabricate a final device corresponding to a 1×8 power splitter developed under the silicon-on-insulator (SOI) platform. To describe the entire technological process for the power splitter, first, we begin by designing and validating our proposed photonic circuit through calculations using several computational routines supported by popular numerical methods, such as the finite-difference time-domain (FDTD) and beam propagation methods (BPM). In the second step, the technological platform employed for fabricating the designed optical circuit is briefly described. Subsequently, the primary objective of this paper is presented, which is to provide a detailed introduction and explanation of the assembly process, including the positioning and coupling of the optical signal to the chip and the integration of all components. Additionally, we developed the packaging process, designing the case to include internal pieces and the external housing suitable for the final system, including fiber optics input/output interfaces. In this final step, all internal and cover components for the packaging were fabricated using 3D printing.

31 March 2026
Verified
Thesis
Closed access
NANicolas Abadia
Nicolas Abadia
Modulateur plasmonique ultra-compact pour les interconnexions optiques sur silicium: Ce travail vise à concevoir un modulateur optique assisté par plamsons, compatible CMOS et à faible consommation électrique. L’électro-absorption, basée sur l’effet Franz-Keldysh dans le germanium, a été choisie comme principe de modulation pour réduire la taille du dispositif et la consommation d'énergie électrique associée. L’effet Franz-Keldysh se traduit par un changement du coefficient d'absorption du matériau près du bord de bande sous l'application d'un champ électrique statique, d'où la production d'une modulation directe de l'intensité lumineuse. L'utilisation de plasmons permet en principe d’augmenter l'effet électro-optique en raison du fort confinement du mode optique. Un outil de simulation électro-optique intégré a été développé pour concevoir et optimiser le modulateur. Le modulateur plasmonique proposé a un taux d'extinction de 3.3 dB avec des pertes d'insertion de 11.2 dB et une consommation électrique de seulement 20 fJ/bit, soit la plus faible consommation électrique décrite pour les modulateurs photoniques sur silicium. Le couplage du modulateur à un guide silicium standard en entrée et en sortie a également été optimisé par l’introduction d'un adaptateur de mode Si-Ge optimisé, réduisant les pertes de couplage à seulement 1 dB par coupleur. Par ailleurs, un travail expérimental a été effectué pour tenter de déplacer l'effet Franz-Keldysh, maximum à 1650 nm, à de plus faibles longueurs d'onde proches de 1.55 μm pour des applications aux télécommunications optiques.

1 March 2026 in APL Computational Physics
Verified
Journal Article
Open access
PDF file
OOOkan K. Orhan
Okan K. Orhan
FBFrank Daniel Bello
Frank Daniel Bello
NANicolas Abadia
Nicolas Abadia
Ortwin HessOrtwin Hess
Ortwin Hess
JDJohn F. Donegan
John F. Donegan
DODavid D. O’REgan
David D. O’REgan
Plasmonic near-field transducers (NFTs) play a key role in administering nanoscale heating for a number of applications ranging from medical devices to next generation data processing technology. We present a novel multi-scale approach, combining quantum many-body perturbation theory with finite-element modeling, to predict the electric and thermal material parameters of various Au-based, noble metal (M) alloys. In particular, we focus on modeling their performance within an NFT designed to focus high-intensity, sub-diffracted light for technologies such as nanoscale etching, manipulation, sensing, and heat-assisted magnetic recording. Elemental Au is the long-standing general-purpose NFT medium due its excellent plasmonic performance at relevant wavelengths. However, elemental Au is a soft, ductile material that tends to extrude and deform in response to extreme temperature gradients. Therefore, alloying Au with other noble metals, such as Ag, Cu, Pd, or Pt, has attracted considerable interest for improved mechanical and thermal robustness while reaching threshold plasmonic generation at standard optoelectronics operating wavelengths (e.g., ≈830 nm) and approximate high-power NFT temperatures (≈400 K). We predict that certain Au–Ag alloys may offer improved thermal stability as whole-NFT media compared to elemental Au, alongside plasmonic figures of merit comparable with that of Au. Simulations of certain solid solution Au–Pd/Pt alloys enable us to predict significantly enhanced thermal conductivity. We predict that alloying with Pd at low concentrations ∼10% may preserve the NFT performance of Au, while offering the benefits of improved thermal and mechanical stability.

28 June 2022 in Optics Continuum
Verified
Journal Article
Open access
MAMugahid Ali
Mugahid Ali
FBFrank Bello
Frank Bello
NANicolas Abadia
Nicolas Abadia
FHFumin Huang
Fumin Huang
JDJohn Donegan
John Donegan
We proposed a new elliptical near-field transducer (NFT) and V-shaped waveguide design, which provides multiple pathways to control and optimise the thermal performance of the optical delivery paths for heat-assisted magnetic recording (HAMR). The principle of operation of the design utilises the properties of the localised surface plasmon resonance (LSPR) of the metallic elliptical NFT. We demonstrated a peak temperature in the recording media normalised to the incident laser power (T Media /P In ) ranging from ∼ 128 K/mW to more than 181 K/mW. We also achieved tunable thermal gradients as high as 23.0 K/nm and 18.7 K/nm in the recording media’s down-track and cross-track directions, respectively. Moreover, we exemplified that the inevitable temperature rise in the plasmonic NFT could be tuned to remain under 400 K for maximum heat in the recording media > 700 K. The best thermal performance obtained corresponded to the aspect ratio of the antenna a/b ∼ 0.89 with the minor axis of the antenna a = 85 nm.