The increasing volume of sewage sludge from wastewater treatment facilities is becoming a prominent concern globally. The disposal of this sludge is particularly challenging and poses severe environmental hazards due to the high content of organic, toxic and heavy metal pollutants among its constituents. This study presents a simple review of four sewage to energy recovery routes (anaerobic digestion, combustion, pyrolysis and gasification) with emphasis on recent developments in research, as well as benefits and limitations of the technology for ensuring cost and environmentally viable sewage to energy pathway. This study focusses on the review of various commercially viable sludge conversion processes and technologies used for energy recovery from sewage sludge. This was done via in-depth process descriptions gathered from literatures and simplified schematic depiction of such energy recovery processes when utilised for sludge. Specifically, the impact of fuel properties and its effect on the recovery process were discussed to indicate the current challenges and recent scientific research undertaken to resolve these challenges and improve the operational, environmental and cost competitiveness of these technologies.
We have developed an order- method to calculate the total energy and atomic forces for a nonorthogonal tight-binding Hamiltonian. We have first confirmed the validity of our approach by comparing our results with the exact calculation for a small silicon cluster. The efficiency of our approach for a large system is demonstrated by determining the equilibrium configuration of a cluster using quenching and annealing techniques based on molecular dynamics.
27 November 2023 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
The electrostatic precipitator (ESP) plays an important role in the dust removal from the flue gas. Currently, the shielding effect of electrode frames seriously affects the electric field distribution and dust removal efficiency of ESPs. In order to explore the shielding effect and propose an improved measurement, an experimental setup with RS barbed electrodes and a 480 C type dust collector electrode plate was built to evaluate the corona discharge characteristics. The current density distribution on the surface of the collecting plate was tested on an ESP experimental setup. The effect of electrode frames on the current density distribution was also systematically investigated. The test results show that the current density distribution on the position that directly opposites the needle of RS corona discharge is much high, on the contrary, the current density on the position that directly opposite the frames is almost zero. It indicates that the frames have a shielding effect on the corona discharge. Therefore, the dust collection efficiency is low in actual ESPs due to the dust escape route caused by the shielding effect. To solve the problem, a new ESP with a split-level frame arrangement was proposed. The conventional electrostatic precipitators are often affected by the electrostatic shielding effect, which leads to uneven charging. The particulate removal efficiency decreases and escape channels are very easy to form. In this study, effective measures were proposed to solve the electrostatic shielding of dust collector frames by studying its electrostatic shielding mechanism. The study provides theoretical support for the improvement of electrostatic precipitators, while improving the dust removal efficiency.
In this study, a completely new mechanism for the effect of K and Pb on α-MnO 2 was proposed. The findings provide valuable insights on the roles of active oxygen species and oxygen vacancies in the low-temperature SCR process.