Metallic grating structures have been shown to provide an effective platform for generating hot electrons and driving electrochemical reactions. Here, we present a systematic theoretical study of the surface plasmon resonance in different corrugated metallic grating structures using computational electromagnetic tools (i.e., the finite difference time domain (FDTD) method). We identify the corrugation parameters that produce maximum resonant field enhancement at commonly used wavelengths for photocatalytic applications (633 nm and 785 nm) in different material systems, including Ag, Au, Cu, Al, and Pt. The absorption spectra of each grating structure have been fitted with the analytical equation obtained from Coupled Mode Theory. We then extracted the absorptive and radiative loss rates. The field enhancement can be maximized by matching the absorption and radiation losses via tuning the geometric parameters. We could improve the average field enhancement of 633 nm and 785 nm modes by a factor of 1.8× and 3.8× for Ag, 1.4× and 3.6× for Au, and 1.2× and 2.6× for Cu. The optimum structures are found to be shallower for Ag, Au, and Cu; deeper for Pt; and to almost remain the same for Al. The gratings become flat for all the metals for increasing the average field enhancement. Overall, Ag and Au were found to be the best in terms of overall field enhancement while Pt had the worst performance.
2 April 2024 in ACS Applied Materials & Interfaces
We have used surface plasmon resonant metal gratings to induce and probe the dielectric response (i.e., electro-optic modulation) of ionic liquids (ILs) at electrode interfaces. Here, the cross-plane electric field at the electrode surface modulates the refractive index of the IL due to the Pockels effect. This is observed as a shift in the resonant angle of the grating (i.e., Δϕ), which can be related to the change in the local index of refraction of the electrolyte (i.e., Δnlocal). The reflection modulation of the IL is compared against a polar (D2O) and a non-polar solvent (benzene) to confirm the electro-optic origin of resonance shift. The electrostatic accumulation of ions from the IL induces local index changes to the gratings over the extent of electrical double layer (EDL) thickness. Finite difference time domain simulations are used to relate the observed shifts in the plasmon resonance and change in reflection to the change in the local index of refraction of the electrolyte and the thickness of the EDL. Simultaneously using the wavelength and intensity shift of the resonance enables us to determine both the effective thickness and Δn of the double layer. We believe that this technique can be used more broadly, allowing the dynamics associated with the potential-induced ordering and rearrangement of ionic species in electrode–solution interfaces.
We report a new approach for fabricating gate-tunable thermal emissivity surfaces by spraying them on graphene ink. The devices consist of a multilayer graphene (MLG)/porous alumina membrane/gold stack, in which the MLG is deposited by spraying the graphene ink onto the porous membrane using an airbrush. The graphene ink consists of μm-sized flakes of MLG suspended in a solution of polyvinylpyrrolidone and ethylene glycol. The alumina porous membrane is filled with the ionic liquid [DEME][TFSI], forming an electrochemical cell. When a positive voltage is applied to the device, the intercalation of [TFSI]- anions causes large changes in the thermal emissivity of the MLG. This, in turn, gives rise to a substantial change in the apparent temperature (i.e., thermal camouflage) as measured by a thermal imaging (i.e., FLIR) camera sensitive over the 7.5-14 μm wavelength range. In this work, the apparent temperature change reaches ΔT = 14 °C. This method of spray coating offers a scalable solution that is compatible with roll-to-roll printing and manufacturing techniques.