Attack detection problems in industrial control systems (ICSs) are commonly known as a network traffic monitoring scheme for detecting abnormal activities. However, a network-based intrusion detection system can be deceived by attackers that imitate the system’s normal activity. In this work, we proposed a novel solution to this problem based on measurement data in the supervisory control and data acquisition (SCADA) system. The proposed approach is called measurement intrusion detection system (MIDS), which enables the system to detect any abnormal activity in the system even if the attacker tries to conceal it in the system’s control layer. A supervised machine learning model is generated to classify normal and abnormal activities in an ICS to evaluate the MIDS performance. A hardware-in-the-loop (HIL) testbed is developed to simulate the power generation units and exploit the attack dataset. In the proposed approach, we applied several machine learning models on the dataset, which show remarkable performances in detecting the dataset’s anomalies, especially stealthy attacks. The results show that the random forest is performing better than other classifier algorithms in detecting anomalies based on measured data in the testbed.
A novel adaptive neural network-based fault-tolerant control scheme is proposed for six degree-of-freedom nonlinear helicopter dynamic. The proposed approach can detect and mitigate actuators and sensors’ faults in real time. An adaptive observer-based on neural network (NN) and extended Kalman filter (EKF) is designed, which incorporates the helicopter’s dynamic model to detect faults in the actuators and navigation sensors. Based on the detected faults, an active fault-tolerant controller, including three loops of dynamic inversion, is designed to compensate for the occurred faults in real time. The simulation results showed that the proposed approach is able to detect and mitigate different types of faults on the helicopter actuators, and the helicopter tracks the desired trajectory without any interruption.
The rapid development of skid control safety applications in Electric Vehicles and modern vehicles calls for a more detailed assessment of the application-related design parameters. One of the main significant parameters in the design of such applications is the skid number threshold. The tire-road skid number is one of the most important variables that influences the sliding control system in modern vehicles. Most of the available studies in the academic literature have focused on testing the sliding mode controller based on estimating the driving forces of vehicles. However, the design of skid control application based on the pavement surface skid conditions is yet to be investigated. In order to fill the gap, this paper proposes a set of British Pendulum Numbers (BPN) for roadway surface treatments under two different weather conditions to enhance the design of the skid control application. The study results concluded that it is critical to accommodate for the lowest skid numbers range between BPN 22.63 and 31.94 for the sand treatment under snow pavement surface and the fog treatment under dry pavement surface, respectively. The results of this study can be beneficial to the automotive industry and transportation agencies when deciding to fine-tune the parameters of the skid control applications in modern vehicle technologies.
The integration of advanced information and communication technology in smart grids has exposed them to increased cyber attacks. Traditional model-based fault detection systems rely on mathematical models to identify malicious activities but struggle with the complexity of modern systems. This paper explores the application of artificial intelligence, specifically machine learning, to develop fault detection mechanisms that do not depend on these models. We focus on operational technology for fault detection, isolation, and identification (FDII) within smart grids, specifically examining a load frequency control (LFC) system. Our proposed approach uses sensor data to accurately identify threats, demonstrating promising results in simulated environments.
Rectangular Hollow Sections (RHS) because of their high resistance to tension, as well as compression, are commonly used as a bracing member with slotted gusset plate connections in steel structures. Since in this type of connection only part of the section contributes in transferring the tensile load to the gusset plate, shear lag failure may occur in the connection. The AISC specification decreases the effective section net area by a factor to consider the effect of shear lag for a limited connection configuration. This study investigates the effective parameters on the shear lag phenomenon for rectangular hollow section members connected at corners using a single concentric gusset plate. The results of the numerical analysis show that the connection length and connection eccentricity are the only effective parameters in the shear lag, and the effect of gusset plate thickness is negligible because of the symmetric connection. The ultimate tensile capacity of the suggested connection in this study were compared to the typical RHS connection presented in the AISC and the similar double angle sections connected at both legs. The comparison indicates that tensile performance of the suggested connection in this study because of its lower connection eccentricity is much higher than the typical slotted connection and double angle connections. Therefore, a new equation is suggested based on the finite element analyses to modify the AISC equation for these connections.