Background: Green synthesis of metallic nanoparticles has gained significant attention in the field of nanomedicine as an environment-friendly and cost-effective alternative in comparison with other physical and chemical methods. Several metals such as silver, gold, iron, titanium, zinc, magnesium and copper have been subjected to nanoformulation for a wide range of useful applications. Silver nanoparticles (AgNPs) are playing a major role in the field of nanomedicine and nanotechnology. They are widely used in diagnostics, therapeutic and pharmaceutical industries. Studies have shown potential inhibitory antimicrobial, anti-inflammatory and antiangiogenesis activities of AgNPs. Methods: AgNPs have been synthesized using silver nitrate and methanolic root extract of Rhazya stricta that belongs to the Apocynaceae family. Stability and dispersion of nanoparticles were improved by adding xylitol. Synthesized nanoparticles were characterized by UV–Vis spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, X-ray diffractometer and Fourier transforms infrared spectroscopy. Furthermore, the antibacterial effect of the plant extract and the nanoparticles were evaluated against gram-positive (Bacillus subtilis) and gram-negative (Escherichia coli) bacteria. Results: The average size of AgNPs synthesized, was 20 nm with the spherical shape. Rhazya stricta based nanoparticles exhibited improved antibacterial activity against both gram-positive and negative strains.

Aspergillus niger MH078571.1 and A. niger MH079049.1 were identified previously as the two highest Aspergillus niger strains producing lipase. Biochemical characterizations of lipase activity and stability for these two strains were examined and revealed that the optimal temperature is 45 °C at pH 8for A. niger MH078571.1 and 55 °C for MH079049.1. The lipase production of both strains was studied on medium contains waste oil, as a cheap source to reduce the industrial cost, showed that the optimal incubation period for the enzyme production is 3 days. Moreover, an experiment on lipase activates in organic solvents demonstrated that 50% of acetone is the best solvent for the two strains. In the presence of surfactants, 0.1% of tween 80 surfactant showed the best lipase activities. Furthermore, Mg²⁺ and Zn²⁺ ions enhanced the lipase activity of A. niger MH078571.1, while Na²⁺ and Cu²⁺ enhanced the enzyme activity of A. niger MH079049.1. Lipase activity was also tested for industrial applications such as integrating it with different detergents. Maximum lipase activity was obtained with 1% of Omo as a powder detergent for both strains. In liquid detergent, 0.1% of Fairy showed maximum lipase activity in A. niger MH078571.1, while the lipase in A. niger MH079049.1 was more effective in 1% of Lux. Moreover, the degradation of natural animal fat with crude enzyme was tested using chicken and sheep fats. The results showed that more than 90% of fats degraded after 5 days of the incubation period.

In this study, thirty-seven alkaline protease-producing bacteria were recovered from different regions of Saudi Arabia. The proteolytic strain with the highest productivity was identified as Bacillus sp. Mar64. Maximum productivity of Mar64P alkaline protease was reached at 60 h, pH 9.0, and 45 °C using 1% tyrosine and 0.5% maltose as nitrogen and carbon supplies, respectively. Specific activity was intensified to 8.5-fold with a recovery of 12.4% and SDS—PAGE revealed one band at 28 kDa after enzyme purification. Mar64P was maximally active at 55 °C and pH 11.0 with thermal stability up to 70 °C and pH stability at 7.0–12.0 for 1 h. It was inhibited by EDTA and unaffected by PMSF, therefore tentatively classified as metalloprotease-type. Storage efficacy was effective for up to eight weeks and it was durable in presence of organic solvents (20%, v/v) such as acetonitrile, acetone, and isopropanol upto to 15 days. The enzyme was compatible with dry detergents at both low and high temperature, in addition, was successful in removing various stains such as blood, egg yolk, chocolate, tea, coffee, and sweat. Furthermore, it was successful in removing skin hairs and hydrolyzing gelatin of waste X-ray films. Collectively, due to these unique properties, Mar64P could be considered an environmentally friendly candidate in both detergent and leather industries.

Lignocellulose, the main component of a plant cell wall, is a potential renewable bioenergy source. It is composed of cellulose, hemicellulose, and lignin structures. Cellulose is a linear polysaccharide that is hydrolyzed chemically or enzymatically by cellulase. The addition of lignocellulosic biomass, such as wheat bran and coffee pulp, into the fermentation culture, induces the production of cellulases. Cellulose accounts for 20% of the enzyme market worldwide, demonstrating benefits in diverse applications, especially bioethanol and biogas generation. The aim is to evaluate the optimal condition for bioethanol production by previously isolated fungal species from different soil types in the eastern region of the Kingdom of Saudi Arabia. This study attempts to evaluate and optimize the culture conditions of lignocellulosic biomass under SSF using the highest cellulases-producer strains in the region: Aspergillus niger and Aspergillus flavus (GenBank Accession No. MT328516 and MT328429, respectively) to produce raw sugar that consequently is used in the next step of bioethanol production. This process has two parts: (1) hydrolyze lignocellulosic biomass to obtain raw sugar using A. niger and A. flavus that produce cellulase, and (2) produce bioethanol through the conversion of the raw sugar produced from the cellulolysis into ethanol using Saccharomyces cerevisiae. The optimal conditions under SSF were seven days of incubation, 5% glucose as a carbon source, 1% ammonium sulfate as a nitrogen source, and 80% moisture for both isolates. Biochemical characterization showed stability for the immobilized enzyme in all temperature ranges (from 20 °C to 70 °C), while the free enzyme exhibited its maximum at 20 °C of 1.14 IU/mL. CMCase production was the highest at pH 4.0 (1.26 IU/mL) for free enzyme and at pH 5.0 (2.09 IU/mL) for the immobilized form. The CMCase activity increased steadily with an increase in water level and attained a maximum of 80% moisture content. The maximum enzyme activity was with coffee pulp as a substrate of 7.37 IU/mL and 6.38 IU/mL for A. niger and A. flavus after seven days of incubation, respectively. The Carboxymethyl Cellulase (CMCase) activity in immobilized enzymes showed good storage stability under SSF for six weeks, maintaining 90% of its initial activity, while the free enzyme retained only 59% of its original activity. As a carbon source, glucose was the best inducer of CMCase activity with coffee pulp substrate (7.41 IU/mL and 6.33 IU/mL for A. niger and A. flavus, respectively). In both fungal strains, ammonium sulfate caused maximum CMCase activities with coffee pulp as substrate (7.62 IU/mL and 6.47 IU/mL for A. niger and A. flavus, respectively). Immobilized S. cerevisiae showed an increase in ethanol production compared to free cells. In the case of immobilized S. cerevisiae cells, the concentration of ethanol was increased steadily with increasing fermentation time and attained a maximum of 71.39 mg/mL (A. niger) and 11.73 mg/mL (A. flavus) after 72 h of fermentation.

Background: Extracellular production of fungal lipases especially the lipases obtained from the Aspergilli has gained immense interest in recent years due to its diverse biotechnological applications. In this study, we focused on determining the fermentation parameters required for the optimal lipase production. Methods: A total of 256 fungal isolates were obtained from oil seeds. From each genus, one isolate was selected to evaluate lipase production using phenol red and tributyrin plate assays. Lipase activity was estimated using the spectrophotometric pNPP hydrolysis assay. The highest lipase producer isolates were identified using 18S ribosomal RNA gene sequencing. The genetic variability was determined by random amplified polymorphic DNA (RAPD) analysis and the dendrogram was constructed using the unweighted pair group method with arithmetic averages method. The isolates were examined in a submerged fermentation culture (Smf) to measure the effect of temperature, pH, incubation time, carbon source, nitrogen source, inoculum volume, and lipid source on lipase production. Results: Eleven isolates belonging to the genus Aspergillus were analyzed for lipase production where they were found to be the highest lipase producers among various fungal genera. All the tested isolates were identified as A. niger using 18s rRNA sequencing. Genetic diversity was evaluated among all of the studied A. niger isolates using RAPD primers. The RAPD primers were used to amplify 285 loci, of which five were polymorphic (1.75%) and seven were monomorphic (2.45%). Thus, a high level of genetic diversity was observed among all isolates. The tributyrin test and the lipase activity assay identified five strains of A. niger as high lipase producers, and their optimal enzyme activities were 709.74, 532.54, 735.64, 794.62, and 787.69 U/ml. The optimal conditions for lipase production were as follows: 40 °C, pH 7.5, 1% fructose as the carbon source, 1% yeast extract as the nitrogen source, 2% palm oil, 2.5 × 10⁷ spores/ml suspension, and 3 days of incubation. Conclusions: The current study provides a comprehensive characterization of the optimal conditions, which are essential to enhance lipase production in five A. niger isolates.

Contemporary lifestyles dictate that people spend between 60 and 90% of their daily lives indoors. For those living in warm climates, air conditioning is thus considered a necessity. Air conditioners function by removing hot and humid air from building interior and replacing it with cooler air. Microorganisms are considered among the most important sources of poor quality of indoor air, and contamination of this air by microbial pollutants is being increasingly recognized as a public health problem and a probable cause of the so-called sick building syndrome. In this regard, microfiber glass panel filters are considered to provide an effective solution for air filtration and have been demonstrated to improve air quality in many applications. However, recent research has demonstrated that certain microorganisms are able to colonize panel filter surfaces. Studies on selected microbes isolated from the most commonly used filters have revealed that the bacterial and fungal moist masses carried on sponge-type filters are greater than those carried on polyester and high-efficiency particulate air (HEPA) filters. Moreover, microbial moist mass has been found to increase with increasing incubation time. In addition, recent research has shown that certain microorganisms, particularly fungi, can colonize the materials used in heating, ventilation, and air-conditioning systems (HVAC).