In this communication, we report on the synthesis of few atomic-layer boron nitride nanosheets (BNNSs) and their application for deep ultraviolet photo-detection. Synthesis of BNNSs is carried out by using the short-pulse plasma beam deposition technique. High-resolution tunneling electron microscopy, cathodoluminescence spectroscopy and photo-stimulated measurements are conducted and linked to characterize the BNNS morphology. The obtained BNNSs are flat with a typical size of 50 × 50 μm2 and are optically transparent down to 210 nm. Nanoscale studies by transmission electron microscopy revealed that these nanosheets are composed of a densely packed honeycomb crystal lattice structure of covalently bonded boron and nitrogen atoms. Cathodoluminescence spectroscopy of these nanosheets revealed a single sharp excitonic peak centered at 233 nm at 300 K. The synthesized BNNSs are used to demonstrate applicability of BNNSs for detecting ultraviolet photons. The initial experimental tests of the developed prototype BNNSs based deep-ultraviolet photo-detector show that it is blind to photons with an energy less than 4 eV. The calculated output power of the detector is approximately 2 μW and the ratio between the output electrical power and the input optical power is ∼1%.
6 January 2012 in ACS Applied Materials & Interfaces
The aim of this review is to provide a survey of the recent advances and the main remaining challenges related to the ultrananocrystalline diamond (UNCD) nanowires and other nanostructures which exhibit excellent capability as the core components for many diverse novel sensing devices, due to the unique material properties and geometry advantages. The boron or nitrogen doping introduced in the gas phase during deposition promotes p-type or n-type conductivity. With the establishment of the UNCD nanofabrication techniques, more and more nanostructure-based devices are being explored in measuring basic physical and chemical parameters via classic and quantum methods, as exemplified by gas sensors, ultraviolet photodetectors, piezoresistance effect-based devices, biological applications and biosensors, and nitrogen-vacancy color center-based magnetic field quantum sensors. Highlighted finally are some of the remaining challenges and the future outlook in this area.
We report on the different surface structures of tungsten oxides which have been synthesized using a simple post-annealing-free hot-filament CVD technique, including 0D nanoparticles (NPs), 1D nanorods (NRs), and 2D nanosheet assemblies of 3D hierarchical nanoflowers (NFs). The surface morphologies, crystalline structures, and material compositions have been characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Raman spectroscopy, respectively. The sensor performances based on the synthesized samples of various surface morphologies have been investigated, as well as the influences of operating temperature and applied bias. The sensing property depends closely on the surface morphology, and the 3D hierarchical nanoflowers-based gas sensor offers the best sensitivity and fastest response time to NH3 and CH3 gases when operated at room temperature.