Ethiopia is endowed with abundant renewable energy resources, which can meet the ambitions of nationwide electrification. However, in spite of all its available potentials the country energy sector is still in its infancy stage. The majority of Ethiopia population lives in the rural area without access to modern energy and relied solely on traditional biomass energy sources. Nowadays Ethiopia has one of the lowest electricity consumption per capita in Africa. Recognizing that energy access and security are a crucial factor to economic growth; Ethiopia needs to cope with key challenges related to energy security and diversification of energy supply. This paper provides a comprehensive and extensive review of renewable energy potentials in Ethiopia. Further, current state of renewable energy resources is described and existing energy policies are articulated. Various policies, that could possibly promote energy technology use in a rural Ethiopia, are proposed. Finally, this paper helps the researchers as well as the government officials to find the better renewable energy technology to meet rural community energy demand; by raising awareness of the country energy potentials and current state of renewable energy, along with proposing pragmatic recommendations.
9 August 2022 in Advances in Materials Science and Engineering
In this research paper, an effort was made to investigate the dry sliding wear rate of friction stir welded AA6262/AA5456 composite performed by the Taguchi approach. Wear experiments are carried out by selecting suitable process parameters such as load (LD), sliding speed (SS), and sliding distance (SE) to recognize the individual and combination effects of parameters. Orthogonal array L27 mode is applied to make numbers of experiments to find the extreme and minimum wear amount. The experimental works are conducted on Pin on Disc (POD) apparatus and measured the weight of samples before and after test for calculating wear rate (WR) and then various analyses are performed such as ANOVA, interaction plot between parameters, and regression model with support of MINITAB software. The results revealed that maximum wear rate is found as 0.01215mm3/Nm at LD of 50N, SE of 600m, and SS of 4m/s, whereas minimum 0.00414mm3/Nm at the grouping process parameters which are LD of 30N, SE of 400m, and SS of 6m/s. From the observation of ANOVA, the most significant factor is identified as load, followed by sliding distance, sliding speed, and combination of each parameter. The load is considered as main parameter which contributes about 83.75 to achieve the maximum wear rate of developed AA6262/5456 composites. The contribution of sliding distance and speed are 3.75 and 1.85, respectively.
Ethiopia, one of the countries in the Horn of Africa, has an abundance of hydroelectric resource potential that can meet the country's energy demand. However, this energy resource has been underutilized, and the country has one of the lowest per capita consumption rates of electricity. Recognizing that energy access and security are critical factors in economic growth, the country has launched a number of hydroelectric projects to meet rising energy demand, as well as a plan to export electricity to neighboring countries. As a result, this paper provides an in-depth review of the country's hydropower potential and current development status. The article then discusses hydro-politics in the context of the construction of the Grand Ethiopian Renaissance Dam (GERD). Finally, it discusses the role of hydropower in meeting energy needs.
This study analyzes the wake dynamics and flow physics of vortex-induced vibration of a rotating circular cylinder at a Reynolds number of 10 000. A direct forcing immersed boundary method coupled with a large eddy simulation is employed to resolve the interaction between the rotating vibrating cylinder and the surrounding turbulent flow. The effects of rotation rate, Reynolds number, and three dimensional wake structures on vibration amplitude and vortex shedding modes are systematically analyzed. The results confirmed that cylinder rotation causes flow separation and wakes to become more asymmetric and strength alternating lift forces, thereby enhancing the vibration response. The evolution of unsteady lift and drag forces governs the onset, growth, and suppression of vortex-induced vibration of a rotating cylinder. As the rotation rate increases, the vibration response transitions from a strongly coupled vibration regime at a rotation rate 0 to a weakened, partially decoupled state at a rotation rate 2 and ultimately to a regime, where vortex shedding is largely suppressed and the fluid–structure interaction vanishes at a rotation rate 2.5. The phase relationship between transverse displacement and lift force is in phase at low reduced velocities but becomes out of phase at the onset of the upper branch for the rotation rate between 0 and 1.5. However, higher rotation rates of 2 and 2.5 maintain an in-phase response over a wider range of reduced velocities. Additionally, the mechanical energy transfer from the fluid to the vibrating rotating cylinder increases as the rotation rate increases from 0 to 2, while the rotation rate of 2.5 nearly suppresses the energy transfer. In general, the findings show that cylinder rotation is an effective mechanism of controlling vortex-induced vibration through wake modification and energy transfer, providing much insight into the enhancement and suppression of vibration in rotating bluff body configurations.
This study investigates the influence of an upstream rotating control rod on the vortex-induced vibration energy harvesting of a circular cylinder at Reynolds number 10 000, using a combination of a modified direct forcing immersed boundary and a large eddy simulation technique. Specifically, we analyze the effects of the control rod rotation rate, the gap ratio, and the damping ratio on cylinder response, hydrodynamic forces, wake dynamics, and energy harvesting efficiency. The results show that the rotating control rod significantly modifies wake and enhances the vibration response in a wide range of reduced velocity. The optimum energy extraction efficiency occurs at a control rod rotation rate of 1 and a gap ratio of 0.2, achieving a harvesting efficiency of 43%, an improvement of approximately 15% over the passive case, and double the efficiency of a bare cylinder. Moderate control rod rotation promotes coherent vortex shedding and maximizes oscillation amplitude and fluid to structure energy transfer, while higher rotation rates destabilize the wake and reduce energy harvesting performance. Although very low damping produces the highest oscillation amplitudes, the highest harvesting efficiency is obtained at a moderate damping ratio of 0.025–0.05, indicating an optimal balance between vibration response and energy extraction. In general, the upstream rotating control rod greatly enhances vibration response and energy harvesting by manipulating wake interaction and broadening the lock-in region.