Magnus Sjöberg

Dr. Magnus Sjöberg

Sandia National Laboratories
+1
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2019 in International Journal of Engine Research
Verified
Journal Article
Open access
PDF file
ZHZongjie Hu
Zongjie Hu
JZJunjie Zhang
Junjie Zhang
MSMagnus Sjöberg
Magnus Sjöberg
WZWei Zeng
Wei Zeng
Lean operation of Spark-Ignition engines can provide higher thermal efficiency compared to standard stoichiometric operation. However, for a homogeneous lean mixture, the associated reduction of flame speeds becomes an important issue from the perspective of robust ignition and fast flame spread throughout the charge. This study is focused on the use of a lean partial fuel stratification strategy that can stabilize the deflagration, while sufficiently fast combustion is ensured via the use of end-gas autoignition. The engine has a spray-guided Direct-Injection Spark-Ignition combustion system and was fueled with either a high-octane certification gasoline or E85. Partial fuel stratification was achieved using several fuel injections during the intake stroke in combination with a small pilot-injection concurrent with the Spark-Ignition. The results reveal that partial fuel stratification enables very stable combustion, offering higher thermal efficiency for parts of the load range in comparison to well-mixed lean and stoichiometric combustion. The heat release and flame imaging demonstrate that the combustion often has three distinct stages. The combustion of the pilot-injected fuel, ignited by the normal spark, acts as a “super igniter,” ensuring a very repeatable initiation of combustion, and flame incandescence reveals locally rich conditions. The second stage is mainly composed of blue flame propagation in a well-mixed lean mixture. The third stage is the compression autoignition of a well-mixed and typically very lean end-gas. The end-gas autoignition is critical for achieving high combustion efficiency, high thermal efficiency, and stable combustion. Partial fuel stratification enables very effective combustion-phasing control, which is critical for controlling the occurrence and intensity of end-gas autoignition. Comparing the gasoline and E85 fuels, it is noted that achieving end-gas autoignition for the higher octane E85 requires a more aggressive compression of the end-gas via the use of a more advanced combustion phasing or higher intake-air temperature.

5 September 2019 in International Journal of Engine Research
Verified
Journal Article
Open access
PDF file
CDCarl-Philipp Ding
Carl-Philipp Ding
DVDavid Vuilleumier
David Vuilleumier
NKNamho Kim
Namho Kim
DRDavid L Reuss
David L Reuss
MSMagnus Sjöberg
Magnus Sjöberg
BBBenjamin Boehm
Benjamin Boehm
Mid-level ethanol/gasoline blends can provide knock resistance benefits for stoichiometric spark-ignition engine operation, but previous studies have identified challenges associated with spray impingement and wall wetting, leading to excessive particulate matter emissions. At the same time, stratified-charge spark-ignition operation can provide increased thermal efficiency, but care has to be exercised to avoid excessive in-cylinder soot formation. In support of the use of mid-level ethanol/gasoline blends in advanced spark-ignition engines, this study presents spray and fuel-film measurements in a direct-injection spark-ignition engine operated with a 30 vol.%/70 vol.% ethanol/gasoline blend (E30). Crank-angle resolved fuel-film measurements at the piston surface are conducted using two different implementations of the refractive index matching technique. A small-angle refractive index matching implementation allows quantification of the wetted area, while a large-angle refractive index matching implementation enables semi-quantitative measurements of fuel-film thickness and volume, in addition to fuel-film area. The fuel-film measurements show that both the amount of fuel deposited on the piston and the shape of the fuel-film patterns are strongly influenced by the injection timing, duration, intake pressure, and coolant temperature. For combinations of high in-cylinder gas density and long injection duration, merging of the individual spray plumes, commonly referred to as spray collapse, can cause a dramatic change to the shape and thickness of the wall fuel films. Overall, the study provides guidance to engine designers aiming at minimizing wall wetting through tailored combinations of injection timings and durations.

22 November 2017 in International Journal of Engine Research
Verified
Journal Article
Closed access
MSMagnus Sjöberg
Magnus Sjöberg
XHXu He
Xu He
Lean or dilute spark-ignition engine operation can provide efficiency improvements relative to that of traditional well-mixed stoichiometric spark-ignition operation. However, to maintain a sufficiently short burn duration with the direct-injection spark-ignition engine hardware of the current study, mixed-mode combustion is required for operation with ϕ < 0.6. Such mixed-mode combustion uses a combination of deflagration and end-gas autoignition whereby the pressure rise of the deflagration-based combustion compresses the end-gas reactants to the point of autoignition. For better understanding of the transition from deflagration to autoignition, it is desirable to apply optical diagnostics. However, with the use of a single centrally located spark plug, the end-gas is found at the periphery of the combustion chamber, where it is difficult to examine optically. To overcome this, two additional spark plugs were mounted in the pent-roof gables (called East and West). Performance testing was performed for five different spark strategies: Central Only, East-West, ALL Three, East Only, and West Only. The five spark strategies are combined with swirl or no-swirl operation for a total of 10 ϕ-sweeps. A high-octane E30 fuel is used here, and intake heating is used to promote both lean combustion stability and end-gas autoignition. The best lean combustion stability is found for the ALL Three spark strategy, followed by the East-West and Central spark strategies, enabling stable mixed-mode spark-ignition combustion for ϕ down to 0.50 and 0.55, respectively. Here, operation without swirl provides the most stable combustion. High-speed imaging of ultra-lean operation without swirl at ϕ = 0.55 using the East-West spark strategy reveals that the transition from deflagration to end-gas autoignition frequently occurs within the view offered by the small piston-bowl window. These results encourage future optical investigations of fuel effects on this transition process, but a larger piston-bowl window is recommended.

12 January 2021 in Energies
Verified
Journal Article
Open access
PDF file
Cinzia TornatoreCinzia Tornatore
Cinzia Tornatore
MSMagnus Sjöberg
Magnus Sjöberg
This paper offers new insights into a partial fuel stratification (PFS) combustion strategy that has proven to be effective at stabilizing overall lean combustion in direct injection spark ignition engines. To this aim, high spatial and temporal resolution optical diagnostics were applied in an optically accessible engine working in PFS mode for two fuels and two different durations of pilot injection at the time of spark: 210 µs and 330 µs for E30 (gasoline blended with ethanol by 30% volume fraction) and gasoline, respectively. In both conditions, early injections during the intake stroke were used to generate a well-mixed lean background. The results were compared to rich, stoichiometric and lean well-mixed combustion with different spark timings. In the PFS combustion process, it was possible to detect a non-spherical and highly wrinkled blue flame, coupled with yellow diffusive flames due to the combustion of rich zones near the spark plug. The initial flame spread for both PFS cases was faster compared to any of the well-mixed cases (lean, stoichiometric and rich), suggesting that the flame propagation for PFS is enhanced by both enrichment and enhanced local turbulence caused by the pilot injection. Different spray evolutions for the two pilot injection durations were found to strongly influence the flame kernel inception and propagation. PFS with pilot durations of 210 µs and 330 µs showed some differences in terms of shapes of the flame front and in terms of extension of diffusive flames. Yet, both cases were highly repeatable.

1 January 2021 in Proceedings of the Combustion Institute
Verified
Journal Article
Closed access
NKNamho Kim
Namho Kim
DVDavid Vuilleumier
David Vuilleumier
XHXu He
Xu He
MSMagnus Sjöberg
Magnus Sjöberg