Underwater radiated noise (URN) is greatly increasing due to an increase in commercial shipping, sonar activities, and climate change. As a result, marine life is having difficulty communicating, and marine ecosystem disturbances are occurring. The noise from the cavitation of propellers is affecting URN. Cavitation is a phenomenon in which rapid changes of pressure in a liquid lead to the formation of small vapor-filled cavities in places where the pressure is relatively low. This phenomenon results in poor efficiency of the propeller or turbine of a ship and noise, vibration, and erosion. For these reasons, this study examines the URN of sheet and cloud cavitation. A numerical analysis was done using a Delft Twist11 hydrofoil. The URN resulting from cloud cavitation and sheet cavitation was compared with the numerical results of previous studies. The results showed that URN normally increases due to pressure fluctuations when cavitation occurs. URN increased more significantly in conditions of cloud cavitation than in cavitation inception. It is also shown that a frequency begins to occur after the occurrence of the cloud cavitation, and the frequency grew as the cavitation fully developed.
31 October 2024 in Journal of Advanced Marine Engineering and Technology
As global concerns over climate change grow, the shipping industry is facing increasing pressure to reduce carbon emissions. Although crucial for global trade, shipping contributes to approximately 3% of global greenhouse gas emissions. In response, the International Maritime Organization(IMO) established a "Net Zero" goal by 2050, intensifying the demand for eco-friendly shipping technologies. Among these, the rotor sail, which utilizes the Magnus effect to provide auxiliary thrust, has recently received significant attention. In this study, the aerodynamic performance of rotor sails with various design configurations is mainly discussed based on numerical simulations. Eight different rotor sail designs including telescopic model, convex and concave shapes were newly suggested from the base model of rotor sail. In this study, various performance parameters such as lift, drag, torque and energy efficiency were compared and discussed. Additionally, the drag of various geometries in the stationary state were also analyzed.