The interest in microalgae products has been increasing, and therefore the cultivation industry is growing steadily. To reduce the environmental impact and production costs arising from nutrients, research needs to find alternatives to the currently used artificial nutrients. Microalgae cultivation in anaerobic effluents (more specifically, digestate) represents a promising strategy for increasing sustainability and obtaining valuable products. However, digestate must be processed prior to its use as nutrient source. Depending on its composition, different methods are suitable for removing solids (e.g., centrifugation) and adjusting nutrient concentrations and ratios (e.g., dilution, ammonia stripping). Moreover, the resulting cultivation medium must be light-permeable. Various studies show that growth rates comparable to those in artificial media can be achieved when proper digestate treatment is used. The necessary steps for obtaining a suitable cultivation medium also depend on the microalgae species to be cultivated. Concerning the application of the biomass, legal aspects and impurities originating from digestate must be considered. Furthermore, microalgae species and their application fields are essential criteria when selecting downstream processing methods (harvest, disintegration, dehydration, product purification). Microalgae grown on digestate can be used to produce various products (e.g., bioenergy, animal feed, bioplastics, and biofertilizers). This review gives insight into the origin and composition of digestate, processing options to meet requirements for microalgae cultivation and challenges regarding downstream processing and products.

Cyanobacteria are a large group of prokaryotic microalgae that are able to grow photo-autotrophically by utilizing sunlight and by assimilating carbon dioxide to build new biomass. One of the most interesting among many cyanobacteria cell components is the storage biopolymer polyhydroxybutyrate (PHB), a member of the group of polyhydroxyalkanoates (PHA). Cyanobacteria occur in almost all habitats, ranging from freshwater to saltwater, freely drifting or adhered to solid surfaces or growing in the porewater of soil, they appear in meltwater of glaciers as well as in hot springs and can handle even high salinities and nutrient imbalances. The broad range of habitat conditions makes them interesting for biotechnological production in facilities located in such climate zones with the expectation of using the best adapted organisms in low-tech bioreactors instead of using “universal” strains, which require high technical effort to adapt the production conditions to the organism‘s need. These were the prerequisites for why and how we searched for locally adapted cyanobacteria in different habitats. Our manuscript provides insight to the sites we sampled, how we isolated and enriched, identified (morphology, 16S rDNA), tested (growth, PHB accumulation) and purified (physical and biochemical purification methods) promising PHB-producing cyanobacteria that can be used as robust production strains. Finally, we provide a guideline about how we managed to find potential production strains and prepared others for basic metabolism studies.

This study explores AnMBR technology as a promising method for treating wastewater from the meat-processing industry by analysing its characteristics and impact under continuous feeding. The solids were retained, utilising an ultrafiltration membrane with a pore size of 0.2 µm, and the efficacy of reducing the organic load was evaluated. Although the COD removal rate decreased from 100% at an OLR of 0.71 g/(L*d) to 73% at an OLR of 2.2 g/(L*d), maximum methane yields were achieved at the highest OLR, 292.9 Nm³/t (COD) and 397.8 Nm³/t (VS) per loaded organics and 353.1 Nm³/t (COD) and 518.7 Nm³/t (VS) per removed organics. An analysis of the microbial community was performed at the end of the experiment to assess the effects of the process and the substrate on its composition. The AnMBR system effectively converts meat-processing wastewater into biogas, maintaining high yields and reducing the loss of dissolved methane in the permeate, thanks to a temperature of 37 °C and high salt levels. AnMBR enables rapid start-up, efficient COD removal, and high biogas yields, making it suitable for treating industrial wastewater with high organic loads, enhancing biogas production, and reducing methane loss. Challenges such as high salt and phosphate levels present opportunities for a wider use in nutrient recovery and water reclamation.

Shows an overview of the integrated biogas purification and nutrient recovery system. The diagram illustrates the coupling of a two-stage biological desulfurization unit with a hollow-fiber membrane contactor. Biogas containing H₂S enters the first scrubber, is oxidized to H₂SO₄, and the biologically produced acid reacts with NH₃ recovered from the effluent to form ammonium sulfate ((NH₄)₂SO₄), demonstrating simultaneous gas purification and nutrient recovery. This study presents a novel integrated system for biogas purification and nutrient recovery, combining biological desulfurization with ammonia recovery using a hollow-fiber membrane contactor. Designed for anaerobic treatment of nitrogen- and sulfur-rich wastes, the system enables simultaneous hydrogen sulfide (H2S) removal and ammonium sulfate production, improving environmental performance and resource recovery. A two-stage desulfurization unit scrubbed and biologically oxidized H2S to sulfuric acid under controlled oxygen supply. The acid was neutralized by ammonia extracted from the biogas effluent through a hydrophobic membrane, forming ammonium sulfate without chemical additives. The system achieved over 95% H2S removal, with outlet concentrations below 35 ppm, and accumulated up to 12.5 g/L (0.095 mol/L) ammonium sulfate. Operation remained stable over several months at pH 3.0, with mass balance and ion analyses confirming efficient sulfur conversion. Microbial analysis identified Acidithiobacillus and Alicyclobacillus as dominant sulfur oxidizers. Compared with conventional systems, the two-stage design avoided sulfur clogging and biogas dilution. This robust, scalable process couples gas purification with nutrient recovery, producing a concentrated fertilizer solution while minimizing chemical use and supporting circular resource utilization.