Viscoelastic fluid naturally has both viscous and elastic properties. Therefore, there are two sources of nonlinear effects, namely inertial and elastic nonlinearities. The existence of elastic nonlinearity brings about various interesting flow phenomena in viscoelastic fluid flow, especially in microfluidics where the inertial nonlinearity can be negligible while the elastic nonlinearity can dominate the flow. Specifically, purely elasticity-induced instability and turbulence can occur in microchannels when the elastic nonlinearity is strong enough. Recently, those intriguing properties of viscoelastic fluid flow have motivated lots of researches on taking viscoelastic fluid as working fluid in different types of microfluidic devices, such as micro-mixers, micro heat exchangers, logic microfluidic circuits and particle manipulation. This paper aims to provide a state-of-the-art review of the nonlinear effect of viscoelastic fluids and its applications in the aforementioned microfluidic fields, which may provide a useful guidance for the researchers who are interested in this area.
Two kinds of nonlinearities coexist in viscoelastic fluid flows, i.e., inertia and elasticity, which can engender different types of chaotic states including inertial turbulence (IT), drag-reducing turbulence (DRT), elastic turbulence, and elasto-inertial turbulence (EIT). The state of maximum drag reduction (MDR), the ultimate state of DRT of viscoelastic fluids, is recently regarded as EIT. This Letter quantitatively demonstrates the role of IT and EIT in drag-reducing turbulent flows passing through the parallel plane channels via the contributions of Reynolds shear stress and the nonlinear part of elastic shear stress to flow drag. The nature of DRT is reexamined under a wide range of flow conditions covering a series of flow regimes from the onset of DR to MDR with the Oldroyd-B model. We argue that EIT-related dynamics appears in DRT long before settling to MDR state and competitively coexists with IT in both spatial and temporal domains at moderate and high Reynolds number (Re). More specifically, under a low DR condition, EIT first emerges close to the channel walls. With the increase in elasticity, low-drag EIT gradually replaces a high-drag IT from channel walls to center, resulting in a drastic decrease in flow drag comparing with IT. When EIT dynamics dominates the whole channel, MDR phenomenon occurs. Our findings provide evidence that DRT phenomenon is the result of IT and EIT interaction.
Droplets composed of two different materials, or Janus droplets, have diverse applications, including microfluidic digital laboratory systems, DNA chips, and self-assembly systems. A three-dimensional computational study of Janus droplet formation in a double Y-type microfluidic device filled with a shear-thinning fluid is performed by using the multiphaseInterDyMFoam solver of the OpenFOAM, based on a finite-volume method. The bi-phase volume-of-fluid method is adopted to track the interface with an adaptive dynamic mesh refinement for moving interfaces. The formation of Janus droplets in the shear-thinning fluid is characterized in five different states of tubbing, jetting, intermediate, dripping and unstable dripping in a multiphase microsystem under various flow conditions. The formation mechanism of Janus droplets is understood by analyzing the influencing factors, including the flow rates of the continuous phase and of the dispersed phase, surface tension, and non-Newtonian rheological parameters. Studies have found that the formation of the Janus droplets and their sizes are related to the flow rate at the inlet under low capillary numbers. The rheological parameters of shear-thinning fluid have a significant impact on the size of Janus droplets and their formation mechanism. As the apparent viscosity increases, the frequency of Janus droplet formation increases, while the droplet volume decreases. Compared with Newtonian fluid, the Janus droplet is more readily generated in shear-thinning fluid due to the interlay of diminishing viscous force, surface tension, and pressure drop.
Recently, the nature of viscoelastic drag-reducing turbulence (DRT), especially the maximum drag reduction (MDR) state, has become a focus of controversy. It has long been regarded as polymer-modulated inertial turbulence (IT), but is challenged by the newly proposed concept of elasto-inertial turbulence (EIT). This study is to repicture DRT in parallel plane channels by introducing dynamics of EIT through statistical, structural and budget analysis for a series of flow regimes from the onset of drag reduction to EIT. Some underlying mechanistic links between DRT and EIT are revealed. Energy conversion between velocity fluctuations and polymers as well as pressure redistribution effects are of particular concern, based on which a new energy self-sustaining process (SSP) of DRT is repictured. The numerical results indicate that at low Reynolds number ( $Re$ ), weak IT flow is replaced by a laminar regime before the barrier of EIT dynamics is established with the increase of elasticity, whereas, at moderate $Re$ , EIT-related SSP can get involved and survive from being relaminarized. This further explains the reason why relaminarization phenomenon is observed for low $Re$ while the flow directly enters MDR and EIT at moderate $Re$ . Moreover, with the proposed energy picture, the newly discovered phenomenon that streamwise velocity fluctuations lag behind those in the wall-normal direction can be well explained. The repictured SSP certainly justifies the conjecture that IT nature is gradually replaced by that of EIT in DRT with the increase of elasticity.
The essence of the maximum drag reduction (MDR) state of viscoelastic drag-reducing turbulence (DRT) is still under debate, which mainly holds two different types of views: the marginal state of inertial turbulence (IT) and elasto-inertial turbulence (EIT). To further promote its understanding, this paper conducts a large number of direct numerical simulations of DRT at a modest Reynolds number Re with $Re = 6000$ for the FENE-P model that covers a wide range of flow states and focuses on the problem of how nonlinear extension affects the nature of MDR by varying the maximum extension length $L$ of polymers. It demonstrates that the essence of the MDR state can be both IT and EIT, where $L$ is somehow an important parameter in determining the dominant dynamics. Moreover, there exists a critical $L_c$ under which the minimum flow drag can be achieved in the MDR state even exceeding the suggested MDR limit. Systematic analyses on the statistical properties, energy spectrum, characteristic structures and underly dynamics show that the dominant dynamics of the MDR state gradually shift from IT-related to EIT-related dynamics with an increase of $L$ . The above effects can be explained by the effective elasticity introduced by different $L$ at a fixed Weissenberg number ( Wi ) as well as the excitation of pure EIT. It indicates that larger $L$ introduces more effective elasticity and is favourable to EIT excitation. Therefore, we argue that the MDR state is still dominated by IT-related dynamics for the case of small $L$ , but replaced by EIT-related dynamics at high $L$ . The obtained results can harmonize the seemingly controversial viewpoints on the dominant dynamics of the MDR state and also provide some ideas for breaking through the MDR limit, such as searching for a polymer solution with a proper molecular length and concentration.