Ceramic membrane contactors hold great promise for CO2 desorption due to their high mass transfer area as well as the favorable characteristics of ceramic materials to resist harsh operating conditions. In this work, a hydrophobic tubular asymmetric alpha-alumina (α-Al2O3) membrane was prepared by grafting a hexadecyltrimethoxysilane ethanol solution. The hydrophobicity and permeability of the membrane were evaluated in terms of water contact angle and nitrogen (N2) flux. The hydrophobic membrane had a water contact angle of ~132° and N2 flux of 0.967 × 10−5 mol/(m2∙s∙Pa). CO2 desorption from the aqueous monoethanolamine (MEA) solution was conducted through the hydrophobic tubular ceramic membrane contactor. The effects of operating conditions, such as CO2 loading, liquid flow rate, liquid temperature and permeate side pressure, on CO2 desorption flux were investigated. Moreover, the stability of the membrane was evaluated after the immersion of the ceramic membrane in an MEA solution at 373 K for 30 days. It was found that the hydrophobic α-Al2O3 membrane had good stability for CO2 desorption from the MEA solution, resulting in a <10% reduction of N2 flux compared to the membrane without MEA immersion.
Ceramic membranes have the advantages of high mechanical strength and thermal stability and are promising candidates for membrane distillation. Ceramic membranes are generally designed to have a multilayer structure with different pore sizes to create a high liquid entry pressure and obtain a high permeability. However, these structural characteristics pose significant difficulties in predicting permeate flux in a ceramic membrane contactor for vacuum membrane distillation (VMD). Here, a modeling approach was developed to simulate the VMD process and verified by comparing the simulated results with the experimental data. Furthermore, correlations are proposed to simplify the calculations of permeate flux for VMD using asymmetric ceramic membranes by assuming those multilayers to be an effectively quasi-symmetric layer and by introducing a correction factor. The simulation results indicated that this simplified correlation was effective and enabled a quick estimation of the effect of membrane parameters on permeate flux.
Efficient recovery of ammonia from sludge hydrolysate (SH) remains a challenging task. This study developed a superhydrophobic capillary ceramic-membrane contactors (MCs), which, by establishing a stable gas-phase mass transfer interface, provides a reliable guarantee for ammonia recovery under high-temperature, high-pH, and high-organic-load conditions. In a controllable simulation system, the system investigated the effects of key operational parameters such as pH, flow rate, and feed ammonia concentration on ammonia mass transfer behavior, and verified the feasibility of this MCs in efficient ammonia removal. Then, this membrane contactor was applied to the actual sludge hydrolysate (SH) system, and its anti-pollution effects, wetting stability, and adaptability to fluctuating conditions under long-term continuous operation were evaluated. The results showed that after operating for 10 h, the ammonia removal in the simulation system and the actual system reached 93.6% and 90.3%, respectively. During long-term operation, the ammonia recovery reached 90.3%. Meanwhile, the organic matter in SH was completely retained, and (NH4)2SO4 was not contaminated by organic matter. Throughout the entire operation process, the contact angle of the membrane remained above 129.6°. This study provides a theoretical basis and practical reference for recovering ammonia using a hydrophobic capillary ceramic-membrane contactor in SH.