Thanigaivelan Rajasekaran

Dr. Thanigaivelan Rajasekaran


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 March 2020 in Journal of Natural Fibers
Verified
Journal Article
Closed access
ENE. Narayanan Nampoothiri
E. Narayanan Nampoothiri
JRJ. Bensam Raj
J. Bensam Raj
TRThanigaivelan Rajasekaran
Thanigaivelan Rajasekaran
RKR. Karuppasamy
R. Karuppasamy
Tri-layer hybrid composites composed of Indian almond and kenaf fibers were fabricated using hand layup method. Two types of hybrid composites namely Kenaf/Indian almond/Kenaf (K/I/K) and Indian almond/Kenaf/Indian almond (I/K/I) were prepared for the investigation. Tensile, flexural, impact, moisture absorption and biodegradation studies were performed on the prepared composites. Tensile and flexural studies revealed that the K/I/K composite showed the maximum average tensile and flexural strength of 85 MPa and 92 MPa, respectively, due to the presence of high strength kenaf fiber as outer layer. The impact study exhibited that the I/K/I composite displayed the maximum average impact strength (5 kJ/m2) owing to the presence of Indian almond fiber at outer layer that absorbed more impact energy due to more surface cracks. Moisture absorption and biodegradation studies showed that the I/K/I composite absorbed more moisture and degraded greatly compared to that of K/I/K composite. The experimental investigations concluded that the K/I/K composite could be used in structural applications as showed better tensile and flexural properties and I/K/I composite could be used in damping environments as displayed better impact strength.

1 January 2013 in Procedia CIRP
Verified
Journal Article
Open access
TRThanigaivelan Rajasekaran
Thanigaivelan Rajasekaran
RAR.M. Arunachalam
R.M. Arunachalam
BKB. Karthikeyan
B. Karthikeyan
PLP. Loganathan
P. Loganathan
This paper describes Electrochemical Micromachining (EMM) of stainless steel with acidified sodium nitrate. The sulphuric acid of 0.05m/L is added to the standard electrolyte namely sodium nitrate to solubilise the by-products. The foremost characteristics of EMM are researched through scheme of experiments involving various parameters, such as machining voltage, pulse on time and electrolyte concentration. The performance of acidified sodium nitrate and sodium nitrate on EMM are compared. Based on the study, the machining rate and overcut are significantly improved using acidified sodium nitrate as an electrolyte

3 November 2020 in Journal of Natural Fibers
Verified
Journal Article
Closed access
VKV. J. Binu Kumar
V. J. Binu Kumar
JRJ. Bensam Raj
J. Bensam Raj
RKR. Karuppasamy
R. Karuppasamy
TRThanigaivelan Rajasekaran
Thanigaivelan Rajasekaran
Hybrid composites composed of neem fiber (N), banana (B) fiber and epoxy resin were fabricated by hand layup method. Three types of composites with blending ratio of B:N (1:4), B:N (1:1) and B:N (4:1) respectively were fabricated and the effects of fiber loading, chemical treatment and moisture absorption on tensile strength of the composites were investigated. The results showed that the fiber loading influenced the tensile strength and the B:N (4:1) composite displayed the superior tensile strength of 52 MPa compared to other composites due to the presence of more amount of banana fiber with high strength. The B:N (1:4) composite exhibited the lowest tensile strength of 47 MPa owing to the presence of more amount of neem fiber with low strength. Chemical treatment of fiber surface improved the tensile strength significantly due to the removal of impurities, lignin and hemicellulose. Silane-treated composite showed the greater tensile strength compared to alkali treated and untreated composites. Silane treated B:N (4:1) composite exhibited 17.5% and 42.3% improvement in tensile strength compared to the tensile strength of alkali treated and untreated composites respectively. Moisture absorption study revealed that the moisture uptake behavior of composite reduced the tensile strength due to the breakage of H-bond. Moisture absorption reduced the tensile strength of B:N (1:4), B:N (1:1) and B:N (4:1) composites by 14.7%, 10% and 5.8% respectively compared to dry samples.

22 August 2019 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
SMS. Maniraj
S. Maniraj
TRThanigaivelan Rajasekaran
Thanigaivelan Rajasekaran
This paper investigates the effect of process parameters on aluminum metal matrix composites using electrochemical micromachining (EMM). In EMM, the electrolyte temperature plays a vital role in enhancing the reaction rate. Hence, in this research, an innovative method of electrolyte heating is proposed for improving the performance of the EMM. The experiments are conducted with a heated electrode (HE) in which the temperature of the electrode is controlled with closed-loop control system. The input parameters such as applied voltage (V), duty cycle (%), electrolytic concentration (g/l) along with the temperature of the tool electrode (°C) are varied on output performance like material removal rate, conicity factor (CF) and radial overcut (ROC). The workpiece is made up of aluminum 6061 with 12% composition of ground granulated blast furnace slag reinforcement and sodium nitrate (NaNO3) is used as an electrolyte. Based on the conducted experiments, HE improves the machining rate by 88.37%, reduces the ROC by 37.03% and reduces the CF by 33.33% at 8 V, 90% duty cycle, 35 g/l electrolyte concentration and 60℃ electrode temperature.

8 February 2017 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
TRThanigaivelan Rajasekaran
Thanigaivelan Rajasekaran
RAR. M. Arunachalam
R. M. Arunachalam
MKMukesh Kumar
Mukesh Kumar
BDBhanu Prakash Dheeraj
Bhanu Prakash Dheeraj
The application of Infrared (IR) light in electrochemical micromachining (EMM) is to focus the machining to confined areas so that material removal and productivity is improved. Predominantly, the localization mechanism in electrochemical machining (ECM) for material removal is determined by the temperature. In this study, a novel method of heating the electrolyte using IR has been attempted in EMM for the first time. IR light is considered for indirect heating of sodium nitrate (NaNO3) electrolyte. Machining parameters such as machining voltage, duty cycle, and electrolyte concentration are varied by keeping the current and electrolyte temperature constant at 1 A and 37 ± 0.5°C, respectively. The effect of these parameters on machining rate and overcut is studied. The result showed that the machining rate for heated electrolyte is 4.2 times better than the electrolyte at room temperature for 25% duty cycle, 35 g/L electrolyte concentration, and 9 V machining voltage. The change in electrolyte conductivity of heated electrolyte solution shows considerable effect on overcut. Field emission scanning electron microscope (FESEM) images show much difference in surface structure for electrolyte at room temperature and heated electrolyte. The findings provide valuable understandings on the use of IR light to heat the electrolyte in order to improve the performance of EMM systems.

3 December 2010 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
TRThanigaivelan Rajasekaran
Thanigaivelan Rajasekaran
RARm. Arunachalam
Rm. Arunachalam
Miniaturization in all emerging areas is rapidly increasing. To meet this need, micromachining is considered as one of the key technologies for the production of miniaturized parts and components. Among the various capable processes, electrochemical micromachining is considered for its advantages of accuracy, no electrode wear, and various ranges of materials that can be machined. An experimental set-up for Electrochemical Micromachining (EMM) is developed with constant gap control system. Experimental studies on the influence of shape of tool electrode tip on machining rate and overcut for 304 Stainless Steel has been presented. The tool electrode tips of different shapes like flat, conical with rounded and truncated cone were used for this study. The experimental results show that the truncated cone tip improves the machining rate by 4.4 times and conical with rounded tip reduces the overcut by 1.7 times when compared with the flat electrode tip at a machining voltage of 10 V, pulse on time of 15 ms, 50 Hz frequency, and 0.29 mole/l electrolyte concentration.